Pulse-vacuum system operation in collecting the industrial fine-dyspersated solid waste

Solid wastes originating from many industries arre highly toxic. They should be collected and disposed of. Various equipment is used to collect the solid waste, including the pulse-vacuum systems widely applied in various industry sectors. The paper considers issues of operation, as well as of physical and mathematical simulation, of a pulse-vacuum system designed for collecting the polydisperse solid toxic industrial waste. The following assumptions were accepted in simulation: wastes moving along the main line to the receiver were having the shape of a cylinder; the latter was impermeable to air, and its diameter was equal to the pipe internal diameter. Dependences are provided of the cylinder motuion coordinates and speed on time for various values of its length, pipeline diameter and pipe line length. Dependences were obtained of the route travel time on various parameters making it possible to improve the process of selecting the toxic waste from various bunkers.
EDN: KHPGIY, https://elibrary/khpgiy

References

[1] Dremel M., Banerjee I., Shaun H. et al. Vacuum pumping system for ITER’s deuterium tritium operational campaign. Vak. Forschung und Prax., 2022, vol. 34, no. 5, pp. 44–48, doi: http://doi.org/10.1002/vipr.202200791

[2] Tripathi P.K., Singh R., Bhatnagar V.K. et al. Design, fabrication, and performance testing of a vacuum chamber for pulse compressor of a 150 TW Ti:sapphire laser. J. Phys.: Conf. Ser., 2012, vol. 390, art. 012014, doi: http://doi.org/10.1088/1742-6596/390/1/012014

[3] Makarov V.N., Ugolnikov A.V., Makarov N.V. et al. Efficient method of recycling of finely dispersed man-made wastes of mining and metallurgical production. Vestnik ZabGU [Transbaikal State University Journal], 2020, vol. 26, no. 2, pp. 40–49, doi: http://doi.org/10.21209/2227-9245-2020-26-2-40-49 (in Russ.).

[4] Utepov Y., Akhmetov D., Akhmatshaeva I. et al. Study of the influence of fine fillers from technogenic waste and chemical additives on the properties of self-compacting concrete. Complex Use of Mineral Resources, 2019, no. 4, pp. 64–73, doi: http://doi.org/10.31643/2019/6445.39

[5] Velikanov N.L., Naumov V.A., Koryagin S.I. Simulation of pneumatic transport in a pulse-piston mode. Tekhniko-tekhnologicheskie problemy servisa, 2018, no. 3, pp. 6–9. (In Russ.).

[6] Sysoev S.N., Sazhin A.V., Romanova V.Yu. Design method of vacuum gripping aggregate modules of industrial robots. Sovremennye naukoemkie tekhnologii [Modern High Technologies], 2019, no. 11–1, pp. 97–101. (In Russ.).

[7] Gradetskiy V.G., Knyazkov M.M., Semenov E.A. et al. Dynamic processes in vacuum contact devices of robots for vertical motion in the water environment. Mekhatronika, avtomatizatsiya, upravlenie, 2019, vol. 20, no. 7, pp. 417–421, doi: https://doi.org/10.17587/mau.20.417-421 (in Russ.).

[8] Zhmakov G.N. Designing pressure and vacuum public sewers. Vodosnabzhenie i sanitarnaya tekhnika [Water Supply and Sanitary Technique], 2016, no. 9, pp. 74–79. (In Russ.).

[9] Sychev M.V., Rybin G.V. The main directions of designing improved energy-efficient liquid ring vacuum pumps in the agro-industrial complex. Innovatsionnaya tekhnika i tekhnologiya [Innovative Machinery and Technology], 2022, vol. 9, no. 3, pp. 68–73. (In Russ.).

[10] Mazanov R.R., Mutuev Ch.M., Aushev Kh.M. Vacuum system of automated pump stations pumping irrigation systems. Problemy razvitiya APK regiona [Development Problems of Regional Agro-Industrial Complex], 2019, no. 3, pp. 93–97. (In Russ.).

[11] Lavrinovich V.A., Pertsev A.A., Rylskaya L.A. Development of the vacuum arc chute for a 110 kV single-break vacuum circuit breaker. Elektrichestvo, 2021, no. 4, pp. 58–64, doi: https://doi.org/10.24160/0013-5380-2021-4-58-64 (in Russ.).

[12] Kravchenko S.V., Nesterov S.B., Romanko V.A. et al. Approaches to creation of complex systems for trying-out and testing of spacecrafts. Inzhenernyy zhurnal: nauka i innovatsii [Engineering Journal: Science and Innovation], 2013, no. 1, doi: http://dx.doi.org/10.18698/2308-6033-2013-1-598 (in Russ.).

[13] Amlinger Kh., Rot Kh., Melts B. Efficient multi-stage vacuum pumping stations for steel vacuumisation. Chernye metally, 2015, no. 12, pp. 37–43. (In Russ.).

[14] Bazinenkov A., Kamenikhin A. Tekhnicheskie sredstva polucheniya i izmereniya davleniya vakuumnoy tekhnologicheskoy sredy [Technical means for obtaining and measuring pressure of vacuum process medium]. Moscow, Bauman MSTU Publ., 2017. 64 p. (In Russ.).

[15] Klesnski K., Merye F., Etingen L. Effective vacuum systems for science and industry. Nanoindustriya [Nanoindustry], 2014, no. 2, pp. 8–12. (In Russ.).