Comparative Analysis of Novikov and Involute Gearing in the ANSYS Workbench Software Package

The paper introduces the results of studying the stress-strain state of the Novikov gearing in comparison with the involute gearing, similar in geometric parameters. In both versions, the wheel and gear are selected in size and gear ratio in accordance with the most common recommendations without additional hardening by chemical heat treatment. The zone of multiple contact of mated profiles is analyzed: changes in the geometry of contacts, pressure in the contact and stresses in various phases of gearing.

References

[1] Matlin M.M., Itkis M.Ya., Shandybina I.M. The Novikov gearing: a Real opportunity. Reduktory i privody, 2007, no. 4, 5, pp. 69–70 (in Russ.).

[2] Kumari V., Srihari P.V., Ramachandra K. Bending Stress Analysis of Involute Helical Gear and Wildhaber–Novikov Gear. Trends in Mechanical Engineering & Technology, 2014, vol. 4, no. 2, pp. 17–21.

[3] Tsay C.B., Fong Z.H., Tao S. The mathematical model of Wildhaber–Novikov gears applicable to finite element stress analysis. Mathematical and Computer Modeling, 1989, vol. 12, no. 8, pp. 939–946, doi: https://doi.org/10.1016/0895-7177(89)90199-4

[4] Ishibashi A., Yoshino H. Power Transmission Efficiencies and Friction Coefficients at Teeth of Novikov–Wildhaber and Involute Gears. ASME. J. Mech., Trans. and Automation, March 1985, vol. 107(1), pp. 74–81.

[5] Katkov A.Yu., Sobolev A.N. Parameterization of Novikov gear models with one and two lines of engagement. Vysokiye tekhnologii v mashinostroyenii. Mater. XVII Vseross. nauch.-tekhn. konf. [High technologies in mechanical engineering. Materials of the XVII all-Russian scientific and technical conference]. Samara, 2018, pp. 94–96.

[6] Yagafarova Kh.N., Stepanova R.R., Zaydullina A.N. A comparative overview of technical characteristics of gears with involute gearing and Novikov gearing for the surface drive screw pump. Perspektivy nauki, 2018, no. 8, pp. 8–12 (in Russ.).

[7] Nesvit V.D., Evsyukov V.A., Kirichenko V.E. Optimization of measurement of dynamic loads on the teeth of Novikov gears. Problemy sovremennoy nauki i obrazovaniya, 2016, no. 10(52), pp. 27–31 (in Russ.).

[8] Korotkin V.I., Gazzaev D.A. Bending intensity of teeth under the influence of a distributed load in different phases of Novikov gearing. Journal of Machinery Manufacture and Reliability, 2014, vol. 43, no. 2, pp. 104–111, doi: 10.3103/S1052618814020083

[9] Ali M., Wasmi H.R., Abdullah M.Q. Generation and Stress Analysis in New Version of Novikov Helical Gear Combining Double Circular Arc and Crowned Involute Profiles. Innovative Systems Design and Engineering, 2016, vol. 7, no. 8, pp. 54–67.

[10] Kanayev A.S. Evaluation of the contact strength of the Novikov pre-polar gearing by the degree of discoloration of the working surfaces of the teeth. Vestnik Izhevskoy gosudarstvennoy sel’skokhozyaystvennoy akademii, 2009, no. 3–4, pp. 18–21 (in Russ.).

[11] Tsvik L.B., Zheleznyak V.N., Kuleshov A.V. Calculation of the strength of the Novikov gearing (DLZ) of the CDN-130A Gearbox for driving the car tipper. Transportnaya infrastruktura Sibirskogo regiona, 2015, vol. 2, pp. 470–478 (in Russ.).

[12] Dyson A., Evans H.P., Snidle R.W. Wildhaber–Novikov circular arc gears: some properties of relevance to their design. Proceedings of the Royal Society of London. Ser. A. Mathematical and Physical Sciences, 1989, vol. 425, no. 1869, pp. 341–363.

[13] Ishibashi A., Yoshino H. Power Transmission Efficiencies and Friction Coefficients at Teeth of Novikov–Wildhaber and Involute Gears. ASME. J. Mech., Trans., and Automation, March 1985, vol. 107(1), pp. 74–81.