Methodological Support Improvement in the Aircraft Technological Processe Design Based on Using the Constraint Hypergraphs

Assembly technological process design is an important stage in technological preparation of the product manufacture significantly influencing labor intensity and production cost. Currently, most stages in design and development of the technological processes in product manufacture are automated at the production enterprises. However, assembly design is still manual, which results in a fact that design automation of the assembly technological process becomes a modern and urgent task. The paper considers classification of the existing methods in solving the problem of automating the assembly technological design process, main problems in solving this problem are being formulated and analyzed. The assembly model of a device for servicing the deployable space structures was reviewed as part of automating the design technological process of its assembly. Design restrictions imposed on the assembly, connections between components and distinctive features of the product assembly in question are described. The device assembly sequence option is proposed, it could be expected with the developed algorithm correct operation.

References

[1] Lushkin A.A., Kruglov P.V. [Methodological support for the design of technological processes of nodal assembly of aircraft based on the use of hypergraphs of constraints]. XLV Akademicheskie chteniya po kosmonavtike. T. 4 [XLV Academic Readings on Cosmonautics. Vol. 4]. Moscow, Bauman MSTU Publ., 2021, pp. 121–125. (In Russ.).

[2] Bozhko A.N., Rodionov S.V. Artificial intelligence methods in computer aided design of assembly processes. Nauka i obrazovanie: nauchnoe izdanie [Science and Education: Scientific Publication], 2016, no. 8. URL: http://engineering-science.ru/doc/844719.html (in Russ.).

[3] Chimitov P.E. The airframe’s assembly sequence planning used an item images. Vestnik SibGAU [Vestnik SibSAU], 2009, no. 2, pp. 218–222. (In Russ.).

[4] Tarasov V.A., Kruglov P.V. Method of generating design solutions for assembly of the product, using oriented hypergraphs. Nauka i obrazovanie: nauchnoe izdanie [Science and Education: Scientific Publication], 2012, no. 1, URL: http://engineering-science.ru/doc/260312.html (in Russ.).

[5] Anisin D.A., Morozov I.V. Procedure for reviewing and making a decision on publication of the paper. Trudy MAI, 2012, no. 51. URL: https://trudymai.ru/published.php?ID=29162 (in Russ.).

[6] Samsonov O.S., Shenaev M.O., Sautenkov M.E. et al. Development of information support for design and modeling the assembly technological processes of aircraft equipment. Izvestiya Samarskogo nauchnogo tsentra RAN [Izvestia RAS SamSC], 2014, vol. 16, no. 1–5, pp. 1601–1608. (In Russ.).

[7] Agrawal D., Kumara S., Finke D. Automated assembly sequence planning and subassembly detection. IIE Annual Conf. IIE, 2014, pp. 781–788.

[8] Lavrentyeva M.V., Chimitov P.E., Karlina Yu.I. Realization of the machine-building products 3d model recognition algorithm. Sovremennye tekhnologii. Sistemnyy analiz. Modelirovanie [Modern Technologies. System Analysis. Modeling], 2017, no. 2, pp. 54–60. (In Russ.).

[9] Gunjia B.M., Deepak B.B.V.L., Khamari B.K. CAD-based automatic clash analysis for robotic assembly. Int. J. Math. Eng. Manag. Sci., 2019, vol. 4, no. 2, pp. 432–441, doi: http://dx.doi.org/10.33889/IJMEMS.2019.4.2-035

[10] Hommem de Mello L.S., Lee S. Computer-aided mechanical assembly planning. Springer, 1991. 446 p.

[11] Akhatov R.Kh., Chimitov P.E. Selection of the assembly sequence in a computer-aided process design environment. Nauchnyy vestnik Norilskogo industrialnogo instituta, 2008, no. 2, pp. 19–22. (In Russ.).

[12] Kruglov P.V., Bolotina I.A. Application of oriented constraint hypergraphs in designing manufacturing technology precision structure. Inzhenernyy zhurnal: nauka i innovatsii [Engineering Journal: Science and Innovation], 2016, no. 5, doi: http://dx.doi.org/10.18698/2308-6033-2016-5-1494 (in Russ.).

[13] Suszyński M., Żurek J. Computer aided assembly sequence generation. Manag. Prod. Eng. Rev., 2015, vol. 6, no. 3, pp. 83–87.

[14] Bakulin V.N., Borzykh S.V. An approach for building dynamic models of the process of disclosure of transformable space structures. Doklady RAN. Fizika, tekhnicheskie nauki, 2021, vol. 499, no. 1, pp. 66–72, doi: https://doi.org/10.31857/S2686740021040040 (in Russ.). (Eng. version: Dokl. Phys., 2021, vol. 66, no. 8, pp. 243–248, doi: https://doi.org/10.1134/S1028335821080024)

[15] Bozhko A.N. Choice of rational balance of assembly of a product. Nauka i obrazovanie: nauchnoe izdanie [Science and Education: Scientific Publication], 2010, no. 7. URL: http://engineering-science.ru/doc/147483.html (in Russ.).

[16] Bahubalendruni M.V.A.R., Biswal B.B., Deepak B. Computer aided assembly attributes retrieval methods for automated assembly sequence generation. Int. J. Mech. Mechatron. Eng., 2017, vol. 11, no. 4, pp. 759–767, doi: https://doi.org/10.5281/zenodo.1130002

[17] Michniewicz J., Reinhart G., Boschert S. CAD-based automated assembly planning for variable products in modular production systems. Procedia CIRP, 2016, vol. 44, pp. 44–49, https://doi.org/10.1016/j.procir.2016.02.016

[18] Melckenbeeck I., Burggraeve S., Van Doninck B. Optimal assembly sequence based on design for assembly (DFA) rules. Procedia CIRP, 2020, vol. 91, pp. 646–652, https://doi.org/10.1016/j.procir.2020.02.223

[19] Sevostyanov I.V. Rational sequence of assembly process design. Nauchnye trudy Vinnitskogo natsionalnogo tekhnicheskogo universiteta [Scientific Works of Vinnytsia National Technical University], 2015, no. 1. URL: https://elibrary.ru/item.asp?id=23296600 (in Russ.).