Selecting a Method for the Manufacture of Porous Powder Filter Products

The article considers three methods of increasing the distribution uniformity of properties over the filtration area of powder filter materials at different stages of their manufacturing. It is shown that granulation of metal powders with a pore former increases the uniformity of permeability distribution over the filtration area by a factor of 2.3–3.5. Dry radial isostatic pressing ensures high distribution uniformity of properties, while the coefficient of variation of local permeability does not exceed 0.17. Radial compression allows increasing the uniformity of permeability distribution over the filtration area by 15 ... 22 % compared to that for the original powder filter materials. The selection of the method used in practice is determined by the shape, size and properties of the manufactured products and initial powders. The considered methods can be used in petrochemical engineering for the manufacture of porous powder products for filtering purposes, used to trap catalyst particles, filters for fine and coarse fuel and oil purification.

References

[1] Liu P., Tao X., Li X., et al. Preparation of superhydrophobic-oleophilic quartz sand filter and its application in oil-water separation. Appl. Surf. Sci., 2018, vol. 447, pp. 656–663, doi: https://doi.org/10.1016/j.apsusc.2018.04.030

[2] Romanovskiy V.I., Gruzinova V.L. Waste synthetic materials for cleaning oil-containing wastewater. Vodoochistka. Vodopodgotovka. Vodosnabzhenie, 2018, no. 1, pp. 26–31. (In Russ.).

[3] Feofanov Yu.A., Ryakhovskiy M.S. On the use of natural sorbents for water purification from petroleum products. Vodoochistka. Vodopodgotovka. Vodosnabzhenie, 2018, no. 6, pp. 32–38. (In Russ.).

[4] Bahadori A. Strainers and filters. Construction, management, and inspection. In: Oil and pipelines and piping systems. Houston, Gulf Prof. Publ. 2017, pp. 377–394.

[5] Il’yushchenko A.F., Kusin R.A., Zakrevskiy I.V., et al. Poroshkovye fil’truyushchie materialy [Powder filter materials]. Minsk, BGATU, 2018. 188 p. (In Russ.).

[6] Ilyushchanka A., Charniak I., Kusin A., et al. Cleaning of technical oils by powder filter materials. J. Phys.: Conf. Ser., 2019, vol. 1260, no. 6, art. 062010, doi: https://doi.org/10.1088/1742-6596/1260/6/062010

[7] Kaptsevich V.M., Tiunchik A.A., Korneeva V.K., et al. Building optimal structure of multilayer filter materials for motor oil cleaning after engine run-in. Agropanorama, 2018, no. 3, pp. 38–45. (In Russ.).

[8] Ksenofontov B.S., Antonova E.S. Intensification of industrial wastewater treatment by flotation with combined system of aeration including ejectors and dispersers. Vodoochistka. Vodopodgotovka. Vodosnabzhenie, 2016, no. 9, pp. 32–36. (In Russ.).

[9] Bram M., Daudt N.F., Balzer H. Porous metals from powder metallurgy techniques. Mat. Sci. Mat. Eng., 2021, doi: https://doi.org/10.1016/B978-0-12-819726-4.00093-4

[10] Popivnenko L.V., Rudenko N.A., Ishchenko V.A. Research into features of compacting and sintering of highly porous materials manufactured by using various blowing agents. Obrabotka materialov davleniem [Materials working by pressure], 2017, no. 1, pp. 156–163. (In Russ.).

[11] Trueba P., Chicardi E., Rodriguez-Ortiz J.A., et al. Development and implementation of a sequential compaction device to obtain radial graded porosity cylinders. J. Manuf. Process., 2020, vol. 50, pp. 142–153, doi: https://doi.org/10.1016/j.jmapro.2019.12.011

[12] Il’yushchenko A.F., Kaptsevich V.M., Kusin R.A., et al. Sposob polucheniya poristykh poroshkovykh materialov [Method for obtaining porous powder materials]. Patent BY 20348. Appl. 28.06.2013, publ. 28.02.2015.

[13] Ilyushchenko A., Kusin R., Charniak I., et al. Improving the uniformity of property distribution along the surface of filter materials obtained using porogens. Proc. Machines, Technologies, Materials, 2014, year XXII, no. 3, pp. 6–19.

[14] Demin S.E., Demina E.L. Matematicheskaya statistika [Mathematical statics]. Nizhniy Tagil, NTI URFU Publ., 2016. 284 p. (In Russ.).

[15] GOST R 50779.10–2000. Statisticheskie metody. Veroyatnost’ i osnovy statistiki. Terminy i opredeleniya [State standard R 50779.10-2000. Statistical methods. Probability and general statistical terms. Terms and definitions]. Moscow, Standartinform Publ., 2008. 41 p. (In Russ.).

[16] Novak L., Novak D. Estimation of coefficient of variation for structural analysis: the correlation interval approach. Struct. Saf., 2021, vol. 92, art. 102101, doi: https://doi.org/10.1016/j.strusafe.2021.102101

[17] Kaptsevich V.M., Korneeva V.K., Zakrevskiy I.V. [Calculation method for layer thickness of multilayer filter materials working in depth filtration regime]. Poroshkovaya metallurgiya: inzheneriya poverkhnosti, novye poroshkovye kompozitsionnye materialy, svarka. Sb. dokl. 12-go Mezhdunar. simp. Ch. 1 [Powder Metallurgy: Surface Engineering, New Powder Composite Materials. Welding. Proc 12th Int. Symp. P. 1]. Minsk, 2021, pp. 231–240. (In Russ.).

[18] Schaffoner S., Fruhstorfer J., Ludwig S., et al. Cyclic cold isostatic pressing and improved particle packing of coarse grained oxide ceramics for refractory applications. Ceram. Int., 2018, vol. 44, no. 8, pp. 9027–9036, doi: https://doi.org/10.1016/j.ceramint.2018.02.106

[19] Yasuda K., Tanaka S., Naito M. Stochastic analysis on ceramic granule collapse in powder compact during cold isostatic pressing. Adv. Powder Technol., 2016, vol. 27, no. 3, pp. 940–947, doi: https://doi.org/10.1016/j.apt.2016.02.032

[20] Fransis L.F. Powder processes. In: Materials processing. New York, Academic Press, 2016, pp. 343–414.