Analysis of the technological and kinematic possibility in shaping buttress thread with the general position сutter

The paper proposes new kinematic methods in shaping external and internal buttress thread by milling with a single-disk tool according to the scheme with crossing axes of the thread and the general position tool using two angles of its rotation. The range of the thrust threads standard sizes was established, which implied technological possibility of milling using the proposed kinematic methods with one tool standard size. Accuracy of the buttress thread according to GOST 10177-82 was studied on the basis of geometric simulation of shaping kinematics, and values of the maximum geometric error and the error in the average diameter were determined depending on the tool rotation angles and geometric parameters. For the accepted standard sizes of the buttress threads, values of rotation angles of the thread cutter rotation axis and parameters of its working part were found, which makes it possible to shape the thread with a degree of accuracy corresponding to GOST 25096–82.

References

[1] 4.5″ 2500HP Quintaplex fluid end. spectraservices.net: website. URL: https://spectraservices.net/products/fluid-ends/ (accessed: 23.05.2022).

[2] Araujo A.C., Fromentin G., Poulachon G. Analytical and experimental investigations on thread milling forces in titanium alloy. Int. J. Mach. Tools Manuf., 2013, vol. 67, pp. 28–34, doi: https://doi.org/10.1016/j.ijmachtools.2012.12.005

[3] Araujo A.C., Fromentin G. Modeling thread milling forces in mini-hole in dental metallic materials. Procedia CIRP, 2017, vol. 58, pp. 623–628, doi: https://doi.org/10.1016/j.procir.2017.03.228

[4] Jun M.B.G., Araujo A.C. Modeling of the thread milling operation in a combined thread/drilling operation: thrilling. J. Manuf. Sci. Eng., 2010, vol. 132, no. 1, art. 014505, doi: https://doi.org/10.1115/1.4000944

[5] Sharma V.S., Fromentin G., Poulachon G. et al. Investigation of tool geometry effect and penetration strategies on cutting forces during thread milling. Int. J. Adv. Manuf. Technol., 2014, vol. 74, no. 5–8, pp. 963–971, doi: https://doi.org/10.1007/s00170-014-6040-z

[6] Kosarev V.A., Grechishnikov V.A., Kosarev D.V. Milling internal thread with planetary tool motion. Russ. Engin. Res., 2009, vol. 29, no. 11, pp. 1177–1179, doi: https://doi.org/10.3103/S1068798X09110227

[7] Lee S.W., Kasten A., Nestler A. Analytic mechanistic cutting force model for thread milling operations. Procedia CIRP, 2013, vol. 8, pp. 546–551, doi: https://doi.org/10.1016/j.procir.2013.06.148

[8] Mohan L.V., Shunmugam M.S. Simulation of whirling process and tool profiling for machining of worms. J. Mater. Process. Technol., 2007, vol. 185, no. 1–3, pp. 191–197, doi: https://doi.org/10.1016/j.jmatprotec.2006.03.115

[9] Fromentin G., Döbbeler B., Lung D. Computerized simulation of interference in thread milling of non-symmetric thread profiles. Procedia CIRP, 2015, vol. 31, pp. 496–501, doi: https://doi.org/10.1016/j.procir.2015.03.018

[10] Malkov O.V., Malkova L.D. Improving thread accuracy in machining components for rocket and space technologies. AIP Conf. Proc., 2019, vol. 2171, no. 1, art. 200006, doi: https://doi.org/10.1063/1.5133364

[11] Shchurov I.A., Nemitova E.V., Shchurova A.V. et al. Metric buttress thread milling and turning on CNC machines. Int. J. Automot. Mech. Eng., 2018, vol. 15, o. 2, pp. 5146–5160, doi: https://doi.org/10.15282/ijame.15.2.2018.1.0398

[12] SLee W., Nestler A. Simulation-aided design of thread milling cutter. Procedia CIRP, 2012, vol. 1, pp. 120–125, doi: https://doi.org/10.1016/j.procir.2012.04.019

[13] Wan M., Altintas Y. Mechanics and dynamics of thread milling process. Int. J. Mach. Tools Manuf., 2014, vol. 87, pp. 16–26, doi: https://doi.org/10.1016/j.ijmachtools.2014.07.006

[14] Fromentin G., Poulachon G. Geometrical analysis of thread milling — part 2: calculation of uncut chip thickness. Int. J. Adv. Manuf. Technol., 2010, vol. 49, no. 1-4, pp. 81–87, doi: https://doi.org/10.1007/s00170-009-2401-4

[15] Malkov O.V., Karelskiy A.S. Rising the work uniformity of thread milling cutters in machining parts of rocket and space technology. AIP Conf. Proc., 2019, vol. 2171, no. 1, art. 200005, doi: https://doi.org/10.1063/1.5133363

[16] Mal’kov O.V., Lagoyskiy I.D. Sposob formoobrazovaniya rez’b [Method of thread shaping]. Patent RU 2749276. Appl. 17.07.2020, publ. 07.06.2021. (In Russ.).

[17] Lagoyskiy I.D. [Improving accuracy of thread milling with epicyclic kinematic scheme using general tools]. Budushchee mashinostroeniya Rossii. 14 Vseros. konf. molodykh uchenykh i spetsialistov [Future of Russian Machine Building. 14th Russ. Conf. of Young Scientists and Specialists]. Moscow, Bauman MSTU Publ., 2021, pp. 15–25. (In Russ.).

[18] Lagoyskiy I.D., Mal’kov O.V. [Providing accuracy of thread milling]. Mashinostroenie: traditsii i innovatsii. Mat. XIII vseros. konf. [Machine Building: Traditions and Innovations. Proc. XIII Russ. Conf.]. Moscow, MGTU STANKIN Publ., 2020, pp. 216–223. (In Russ.).

[19] Lagoyskiy I.D., Mal’kov O.V. [Analysis of thread formation methods]. Vserossiyskaya nauchno-metodicheskaya konferentsiya [Russ. Sci.-Method. Conf.]. Moscow, Bauman MSTU Publ., 2020, pp. 60–64. (In Russ.).