Pendulum scribing with the acoustic emission registration

Physical, mechanical and operational properties of tool materials were evaluated by various methods and techniques. However, those that allowed predicting performance of the metal-cutting tools in various operating conditions were becoming more and more in demand. The paper provides certain results of the pendulum scribing (scratching) introduction in evaluating and predicting performance of the coated tool. The parameter under study was crack resistance (resistance to formation and growth of cracks) of the tool material. The process of pendulum scribing was accompanied by registration of the acoustic emission signals. Acoustic emission was involved as a process that physically reflected alteration in the stress-strain state of the tool material.

References

[1] Mokritskiy B.Ya. Acoustical emission as an estimation method of the properties of tool materials. Vestnik mashinostroeniya, 2010, no. 10, pp. 76–78. (In Russ.).

[2] Mokritskiy B.Ya. Assessment of the properties of tool materials and diagnostic of the efficiency of cutting tools. Zavodskaya laboratoriya. Diagnostika materialov [Industrial Laboratopy. Materials Diagnostics], 2010, no. 9, pp. 41–44. (In Russ.).

[3] Muravin G.B., Sinkin Ya.V., Merman A.I. Identification of destruction mechanism using spectral analysis methods for acoustic emission signals. Defektoskopiya, 1989, no. 4, pp. 8–15. (In Russ.).

[4] Novikov N.V., Lysenko O.G., Devin L.V. Destruction diagnostics of polycristalline superhard materials using acoustic emission method. Sverkhtverdye materialy, 1991, no. 4, pp. 36–44. (In Russ.).

[5] Semashko N.A., Mokritskaya E.B., Mokritskiy B.Ya. et al. Sposob issledovaniya svoystv materiala izdeliy [Process investigating properties of material of article]. Patent RU 2140075. Appl. 09.07.1998, publ. 20.10.1999. (In Russ.).

[6] Kirichek A.V., Solovyev D.L., Lazutkin A.G. Tekhnologiya i oborudovanie statiko-impulsnoy obrabotki poverkhnostnym plasticheskim deformirovaniem [Technology and equipment for static-pulse processing by surface plastic deformation]. Moscow, Mashinostroenie Publ., 2004. 288 p. (In Russ.).

[7] Stepanov Yu.S., ed. Mekhanika nagruzheniya poverkhnosti volnoy deformatsii [Loading mechanics of a wave deformation surface]. Moscow, Mashinostroenie Publ., 2005. 148 p. (In Russ.).

[8] Vereshchaka A.S., Dachaeva A.V., Anikeev A.I. Working capacity enhancement of cutting tools in terms of machining of difficult-to-cut materials by complex application of wear-resistant coating and hard alloy. Izvestiya MGTU MAMI, 2010, no. 1, pp. 99–106. (In Russ.).

[9] Grigoryev S.N. Metody povysheniya stoykosti rezhushchego instrumenta [Methods for raising cutting toll power]. Moscow, Mashinostroenie Publ., 2011. 368 p. (In Russ.).

[10] Tabakov V.P., Chikhranov A.V. Raising working efficiency of carbide tools by directory choice of rational parameters of wear-resistance coating composition. STIN, 2016, no. 3, pp. 14–18. (In Russ.).