Experimental Studies of the Rotational Speed Automatic Control System for Locomotive Engine Shafts
Authors: Markov V.A., Furman V.V., Plakhov S.V., Sa Bowen | Published: 03.03.2020 |
Published in issue: #3(720)/2020 | |
Category: Energy and Electrical Engineering | Chapter: Heat Engines | |
Keywords: shunting diesel locomotive, internal combustion engine, diesel engine, rotational speed automatic control system, PID-controller, PI-controller |
This study addresses the problem of selecting the optimal structure and parameters of an electronic rotational speed controller for the crankshaft of a locomotive engine. An electronic control system of fuel supply ESUVT.01 developed by OOO PPP Dizelavtomatika (Saratov) for the locomotive diesel engine D50 manufactured by OAO Penzadizelmash is presented in the paper. Experimental studies were conducted to evaluate the impact of the structure and parameters of the system on dynamic properties of the engine. Bench tests were conducted on a diesel generator unit 1-PDG4D consisting of a diesel engine D50 and a traction generator MPT-84/39. As the result of the testing, equations describing dependencies of the transient process duration, overspeeding during the transient process and the free period on the parameters of the proportional-and-integral controller were obtained. The study confirmed the need to optimise the values of the coefficients of the proportional and integral components of the proportional-and-integral governing law and adjust them in accordance with the operational mode of the diesel engine. An appropriate optimisation method was proposed. Optimised values of these coefficients for the transient process of the studied diesel engine acceleration with regard to the locomotive characteristic were obtained.
References
[1] Dvigateli vnutrennego sgoraniya: Ustroystvo i rabota porshnevykh i kombinirovannykh dvigateley [Internal combustion engines: Design and operation of piston and combined engines]. Ed. Orlin A.S., Kruglov M.G. Moscow, Mashinostroyeniye publ., 1990. 288 p.
[2] Grekhov L.V., Ivashchenko N.A., Markov V.A. Toplivnaya apparatura i sistemy upravle-niya dizeley [Fuel equipment and diesel control systems]. Moscow, Legion-Avtodata publ., 2005. 344 p.
[3] Mashinostroyeniye. Entsiklopediya. Tom IV. Dvigateli vnutrennego sgoraniya [Engineering. Encyclopedia. Volume IV. Internal combustion engines]. Ed. Aleksandrov A.A., Ivashchenko N.A. Moscow, Mashinostroyeniye publ., 2013. 784 p.
[4] Neftyanyye motornyye topliva: ekologicheskiye aspekty primeneniya [Petroleum motor fuels: environmental aspects of application]. Ed. Aleksandrov A.A., Markov V.A. Moscow, OOO NITS “Inzhener” publ., OOO “Oniko-M” publ., 2014. 691 p.
[5] Strategiya nauchno-tekhnologicheskogo razvitiya kholdinga “Rossiyskiye zheleznyye dorogi” na period do 2025 goda i na perspektivu do 2030 goda (Belaya kniga) [The strategy of scientific and technological development of the holding “Russian Railways” for the period until 2025 and for the long term until 2030 (White Paper)]. Moscow, OAO “RZHD” publ., 2018. 128 p.
[6] Energeticheskaya strategiya kholdinga “Rossiyskiye zheleznyye dorogi” na period do 2015 goda i na perspektivu do 2030 goda [The energy strategy of the holding “Russian Railways” for the period until 2015 and for the long term until 2030]. Moscow, OAO “RZHD” publ., 2011. 97 p.
[7] Igin V.N. Zakhvatov A.V., Igin F.V. Reserves for improving the energy efficiency of diesel locomotives. Lokomotiv, 2013, no. 3, pp. 2–3 (in Russ.).
[8] Krutov V.I. Avtomaticheskoye regulirovaniye i upravleniye dvigateley vnutrennego sgoraniya [Automatic regulation and control of internal combustion engines]. Moscow, Mashinostroyeniye publ., 1989. 416 p.
[9] Kossov E.E., Sukhoparov S.I. Optimizatsiya rezhimov raboty teplovoznykh dizel’–generatorov [Optimization of operating modes of diesel–generators]. Moscow, Intekst publ., 1999. 184 p.
[10] Khomich A.Z. Toplivnaya effektivnost’ i vspomogatel’nyye rezhimy teplovoznykh dizeley [Fuel efficiency and auxiliary modes of diesel engines]. Moscow, Transport publ., 1987. 271 p.
[11] Patrakhal’tsev N.N. Neustanovivshiyesya rezhimy raboty dvigateley vnutrennego sgoraniya [Unsteady operating modes of internal combustion engines]. Moscow, RUDN publ., 2009. 380 p.
[12] Lukov N.M. Avtomaticheskiye sistemy upravleniya i regulirovaniya teplovozov [Automatic control and regulation systems for diesel locomotives]. Moscow, MIIT publ., 1983. 144 p.
[13] Kossov E.E., Shapran E.N., Furman V.V. Sovershenstvovaniye rezhimov raboty silovykh energeticheskikh sistem teplovozov [Improving the operating modes of power energy systems of diesel locomotives]. Lugansk, VNU im. V. Dalya publ., 2006. 280 p.
[14] Goncharov N.E., Kazantsev V.P. Manevrovaya rabota na zheleznodorozhnom transporte [Rail shunting]. Moscow, Transport publ., 1978. 183 p.
[15] Chaynov N.D., Rayenko M.I., Ryzhov V.A. Prochnost’ teplonapryazhennykh bazovykh detaley sredneoborotnykh dvigateley vnutrennego sgoraniya [Strength of heat-stressed base parts of medium-speed internal combustion engines]. Moscow, Mashinostroyeniye publ., 2015. 360 p.
[16] Bosh. Sistemy upravleniya dizel’nymi dvigatelyami [Bosh. Diesel engine management systems]. Moscow, ZAO “KZHI Za rulem” publ., 2004. 480 p.
[17] Bosh. Sistemy upravleniya benzinovymi dvigatelyami [Bosh. Gas engine control systems]. Moscow, ZAO “KZHI Za rulem” publ., 2005. 432 p.
[18] Pinskiy F.I., Davtyan R.I., Chernyak B.Ya. Mikroprotsessornyye sistemy upravleniya avtomobil’nymi dvigatelyami vnutrennego sgoraniya [Microprocessor control systems for automotive internal combustion engines]. Moscow, Legion-Avtodata publ., 2001. 136 p.
[19] Markov V.A., Furman V.V., Bebenin E.V. Improvement of the speed control system for diesel and gas diesel engines. AutoGas Filling Complex + Alternative Fuel, 2016, no. 4, pp. 12–29 (in Russ.).
[20] State Standard 55231–2012. Reciprocating internal combustion engines – Performance – Part 4: Speed governing. Moscow, Standartinform publ., 2013. 18 p.
[21] Hu B., Li J., Li S., Yang J. A Hybrid End-to-End Control Strategy Combining Dueling Deep Q-network and PID for Transient Boost Control of a Diesel Engine with Variable Geometry Turbocharger and Cooled EGR. Energies, 2019, vol, 12, iss. 19, no. 3739, doi: 10.3390/en12193739
[22] Furman V.V. Electronically controlled diesel fuel supply system. Gruzovik, 2014, no. 9, pp. 10–14 (in Russ.).
[23] Furman V.V., Ivanov V.A., Markov V.A. Electronic control systems for diesel engines. Engineering Journal: Science and Innovation, 2013, iss. 5, pp. 1–18 (in Russ.). Available at: http://engjournal.ru/catalog/machin/cryogen/723.html (accessed 15 May 2019).
[24] Furman V.V., Plakhov S.V., Markov V.A., Kossova L.E. Electronic systems of fuel supply control in gas and diesel-gas engines. AutoGas Filling Complex + Alternative Fuel, 2018, vol. 17, no. 1, pp. 20–29 (in Russ.).
[25] Khryashchev Yu.E., Tikhomirov M.V., Epaneshnikov D.A. Algoritmy upravleniya dvigatelyami vnutrennego sgoraniya [Algorithms for controlling internal combustion engines]. Yaroslavl, YASTU publ., 2014. 204 p.
[26] Kharitonov S.V. Formirovaniye kharakteristik dizel’nogo dvigatelya pri ispol’zovanii sistemy kompleksnogo adaptivnogo upravleniya. Kand. Diss. [Formation of the characteristics of a diesel engine using an integrated adaptive control system. Cand. Diss.]. Moscow, 2017. 171 p.
[27] Pozdnyakov E.F. Analiz effektivnosti ispol’zovaniya regulyatora chastoty vrashcheniya s posledovatel’no vklyuchennymi korrektiruyushchimi zven’yami v dizel’nom dvigatele dizel’-generatornoy ustanovki. Kand. Diss. [Analysis of the efficiency of using a speed controller with sequentially connected corrective links in a diesel engine of a diesel generator set. Cand. Diss.]. Moscow, 2009. 150 p.