An Analysis of the Cooling Intensity Effect of a Two-Cylinder Single-Stage Piston Hybrid Power Machine with Fluid Flow Due to Vacuum at Suction on the Working Processes and Indicative Efficiency

In this paper, a new promising scheme of a two-cylinder single-stage piston hybrid power machine with fluid flow due to vacuum at suction is examined. A prototype is developed, and an experimental stand is created. An analysis of the influence of the coolant flow on the working processes of the machine is carried out theoretically and experimentally. The results obtained show that an increase in the coolant consumption leads to a decrease in the input technical work in the process of compression, an increase in the output technical work in the process of decompression, a reduction of the work losses in the process of discharge and an increase of the work losses in the process of suction. Based on the conducted experimental studies it is established that the optimal indicative value of the efficiency for the experimental machine under study is in the range of 300 – 400 ml/min and the relative increase in the indicative efficiency is within 7 %.

References

[1] Plastinin P.I. Porshnevyye kompressory [Piston compressor]. Vol. 1. Moscow, Koloss publ., 2006. 397 p.

[2] Frenkel’ M.I. Porshnevyye kompressory [Piston compressor]. Leningrad, Mashinostroyeniye publ., 1969. 744 p.

[3] Fotin B.S., Pirumov I.B., Prilutskiy I.K., Plastinin P.I. Porshnevyye kompressory [Piston compressor]. Leningrad, Mashinostroyeniye, Leningr. otd-niye publ., 1987. 372 p.

[4] Shcherba V.E. Rabochiye protsessy kompressorov ob”yemnogo deystviya [Working processes of volumetric compressors]. Moscow, Nauka publ., 2008. 319 p.

[5] Shcherba V.E., Bolshtyanskiy A.P., Shalay V.V., Khodoreva E.V. Nasos-kompressory. Rabochiye protsessy i osnovy proyektirovaniya [Pump-compressors. Workflows and design basics]. Moscow, Mashinostroyeniye publ., 2013. 368 p.

[6] Shcherba V.E., Bolshtyanskiy A.P., Kaygorodov S.Yu., Kuzeyeva D.A. Analysis of advantages of integration of displacement compressors and pumps into single unit. Vestnik mashinostroyeniya, 2015, no. 12, pp. 15–19 (in Russ.).

[7] Tegzhanov A.S., Shcherba V.E., Nosov E.Yu. Razrabotka opytnogo obraztsa beskreytskopfnoy porshnevoy gibridnoy energeticheskoy mashiny. Vestnik Irkutskogo gosudarstvennogo tekhnicheskogo universiteta, 2018, vol. 22, no. 11, pp. 63–70 (in Russ.).

[8] Bazhenov A.M., Shcherba V.E., Shalay V.V., Grigor’yev A.V., Kondyurin A.Yu. Mathematical modeling of the working processes of a piston hybrid energy machine of volumetric action with a slotted step seal. Vestnik mashinostroyeniya, 2019, no. 2, pp. 55–60 (in Russ.).

[9] Shcherba V.E., Paramonov A.M., Blinov V.N., Surikov V.I., Nosov E.Yu., Tegzhanov A.S. Comparative analysis of compressed gas cooling in crosshead and crosshead-free reciprocating hybrid volumetric power machines. Khimicheskoye i neftegazovoye mashinostroyeniye, 2019, no. 9, pp. 26–30 (in Russ.).

[10] Shcherba V.E., Tegzhanov A.S., Nosov E.Yu., Blinov V.N., Khrapskiy S.F. A Comparative Analysis of Mass-Dimensional Indicators of Crossheadless and Crosshead Piston Hybrid Energy Positive Displacement Machines. Proceedings of Higher Educational Institutions. Маchine Building, 2019, no. 9, pp. 88–95 (in Russ.), doi: 10.18698/0536-1044-2019-9-88-95

[11] Shcherba V.E., Shalay V.V., Kondyurin A.Yu., Nosov E.Yu., Bazhenov A.M., Lysenko E.A., Bolshtyanskiy A.P. Development and research of an experimental sample of a piston hybrid energy machine. Vestnik mashinostroyeniya, 2019, no. 8, pp. 12–17 (in Russ.).

[12] Lobov I.E., Shcherba V.E. Development and calculation of a liquid cooling system for piston compressor based on utilization of gas pressure fluctuation on pumping. Khimicheskoye i neftegazovoye mashinostroyeniye, 2016, no. 4, pp. 19–24 (in Russ.).

[13] Shcherba V.E., Nosov E.Yu., Pavlyuchenko E.A., Kuzeyeva D.A., Lobov I.E. Analysis of fluid dynamics in piston hybrid energy machine with gas volume on suction. Khimicheskoye i neftegazovoye mashinostroyeniye, 2016, no. 4, pp. 15–19 (in Russ.).

[14] Shcherba V.E., Bolshtyanskii A.P., Kaigorodov S.Y., Kuzeeva D.A. Nonuniform delivery rates from multicylinder pumps. Russian Engineering Research, 2016, vol. 36, no. 4, pp. 266–269, doi: 10.3103/S1068798X1604016X

[15] Shcherba V.E., Shcherbakov V.S., Galdin N.S., Grigor’yev A.V., Trukhanova D.A. The analysis of influence of the attitude of pressure of forcing towards suction pressure upon characteristics of the piston hybrid power machine with a gas volume on an absorption. Khimicheskoye i neftegazovoye mashinostroyeniye, 2018, no. 2, pp. 22–26 (in Russ.).

[16] Shcherba V.E., Shcherbakov V.S., Galdin N.S., Vedruchenko V.R., Grigor’yev A.V., Trukhanova D.A. The analysis of influence of an angular velocity of rotation of a bent shaft on characteristics of the piston hybrid power machine with a gas volume on an absorption. Khimicheskoye i neftegazovoye mashinostroyeniye, 2018, no. 3, pp. 26–29 (in Russ.).