An Analysis of the Influence of the Linear Hydraulic Drive Regulation Law on the Energy and Dynamic Characteristics of a Single-Stage Compressor Unit
Authors: Yusha V.L., Busarov S.S., Nedovenchanyi A.V., Silkov M.V. | Published: 26.11.2019 |
Published in issue: #11(716)/2019 | |
Category: Energy and Electrical Engineering | Chapter: Vacuum and Compressor Technology and Pneumatic Systems | |
Keywords: law of motion of hydraulic drive, low-speed long-stroke compressor unit, working process, piston stage |
The significant unevenness of the instantaneous power of a piston compressor unit during its operating cycle creates certain problems in the selection and operation of drive engines, which are usually solved by installing a flywheel. In single-stage compressor units with linear drive based on low-speed long-stroke stages, the amplitude change in the gas force during the operating cycle is significantly higher compared to similar compressor units. This leads to such an increase in the amplitude change of the instantaneous power of the drive, that the use of a flywheel becomes impractical. The article discusses the issues of ensuring the required dynamic and energy characteristics of single-stage compressor units with linear hydraulic drive by synthesizing the law of motion of the drive, the piston of which is rigidly connected to the piston of the compressor stage. Design methodology and the results of the computational parametric analysis are presented. The relevance of determining effective laws of motion of the drive as applied to compressor units with linear actuators based on low-speed long-stroke stages is confirmed.
References
[1] Busarov S.S., Yusha V.L. Prospects for creating low-flow compressor units with medium and highpressuresbased on unified low-speed long-stroke stages. St. Petersburg polytechnic university journal of engineering science and technology, 2018, vol. 24, no. 4, pp. 80–89 (in Russ.), doi: 10.18721/JEST.24408
[2] Yusha V.L., Busarov S.S., Nedovenchanyi A.V. Gromov A.Yu., Sazhin B.S. Analysis of thermal state of intensely cooled long-stroke low-speed piston compressor stage. Chemical and Petroleum Engineering, 2017, vol. 52, iss. 9–10, pp. 597–601, doi: 10.1007/s10556-017-0239-4
[3] Prilutskiy I.K., Molodova Yu.I., Galyayev P.O., Snazin A.A., Molodov M.A., Ivanova I.L. Peculiarities of heat exchange processes in the stages of small-scale machines of volume action with different mechanisms of movement. Journal of International Academy of Refrigeration, 2017, no. 4, pp. 30–40 (in Russ.), doi: 10.21047/1606-4313-2017-16-4-30-40
[4] Yusha V.L., Busarov S.S., Gromov A.Yu. Assessment of the Prospects of Development of Medium-Pressure Single-Stage Piston Compressor Units. Chemical and petroleum engineering, 2017, vol. 53(7–8), pp. 453–458, doi: 10.1007/s10556-017-0362-2
[5] Busarov S.S., Goshlya R.Yu., Nedovenchanyy A.V., Gromov A.Yu., Busarov I.S., Titov D.S. Mathematical modeling of heat transfer processes in the working chamber of a low-speed piston compressor stage. Kompressornaya tekhnika i pnevmatika, 2016, no. 6, pp. 6–10 (in Russ.).
[6] Plastinin P.I. Porshnevyye kompressory. T. 1. Teoriya i raschet [Reciprocating Compressors. Vol. 1. Theory and calculation]. Moscow, Kolos publ., 2006. 456 p.
[7] Fotin B.S. Rabochiye protsessy porshnevykh kompressorov. Avtoref. Kand. Diss. [Working processes of piston compressors. Cand. Diss.]. Leningrad, 1974. 34 p.
[8] Frenkel’ M.I. Porshnevyye kompressory [Reciprocating Compressors]. Leningrad, Mashinostroyeniye publ., 1969. 744 p.
[9] Volkov A.N., Matsko O.N., Mosalova A.V. Selecting the energy-saving laws of motion for mechatronic drives of production machines. St. Petersburg State Polytechnic University Journal of Engineering Science and Technology, 2018, vol. 24, no. 4, pp. 141–149 (in Russ.), doi: 10.18721/JEST.24414
[10] Yusha V.L., Busarov S.S., Nedovenchanyi A.V. Assessment of the relationship between the law of movement of the piston of the low-speed long stroke stage and the drive characteristics of the compressor unit. Kompressornaya tekhnika i pnevmatika, 2018, no. 2, pp. 11–15 (in Russ.).
[11] Yusha V.L., Busarov S.S., Nedovenchanyi A.V. Analysis of the operating cycle efficiency of the long-stroke slow stage under the changing ratio of the piston forward and backward stroke time. AIP Conference Proceedings, 2007, 030057, pp. 030057-1–030057-6, doi: 10.1063/1.5051919
[12] Yusha V.L., Busarov S.S., Goshlya R.Yu., Nedovenchanyy A.V. Experimental study of working processes of low-speed longstroke lubrication free piston compressor stages at high discharge pressure to suction pressures. Omsk Scientific Bulletin. Series Aviation-Rocket and Power Engineering, 2018, vol. 2, no. 2, pp. 13–18 (in Russ.), doi: 10.25206/2588-0373-2018-2-2-13-18.
[13] Yusha V.L., Busarov S.S., Nedovenchanyy A.V., Sazhin B.S., Gromov A.Yu. Comparative analysis of heat state of intensely chilled long-stroke low-speed stage of piston compressor. Khimicheskoye i neftegazovoye mashinostroyeniye, 2016, no. 9, pp. 11–14 (in Russ.).
[14] Bashta T.M., Rudnev S.S., Nekrasov B.B., Baykova O.V., Kirillovskiy Yu.L. Gidravlika, gidromashiny i gidroprivody [Hydraulics, hydraulic machines and hydraulic drives]. Moscow, Al’yans publ., 2010. 423 p.
[15] Shcherbakov V.S., Zhdanov A.V. Optimizatsiya konstruktivnykh parametrov gidravlicheskikh rulevykh mekhanizmov stroitel’nykh i dorozhnykh mashin [Optimization of design parameters of hydraulic steering mechanisms of construction and road machines]. Omsk, SibADI publ., 2010. 176 p.
[16] Plastinin P.I. Porshnevyye kompressory. T. 2. Teoriya i raschet [Reciprocating Compressors. Vol. 2. Theory and calculation]. Moscow, Kolos publ., 2008. 711 p.
[17] Busarov S.S., Nedovenchanyy A.V., Bukhanets D.I., Shcherban’ K.V. Verification of procedure for calculating working processes of lubrication free low-speed long-stroke piston high-pressure stages. Omsk Scientific Bulletin. Series Aviation-Rocket and Power Engineering, 2018, vol. 2, no. 2, pp. 19–25 (in Russ.), doi: 10.25206/2588-0373-2018-2-2-19-25.
[18] Braslavskiy I.Ya., Ishmatov Z.Sh., Polyakov V.N. Energosberegayushchiy asinkhronnyy elektroprivod [Energy saving asynchronous electric drive]. Moscow, Akademiya publ., 2004. 256 p.
[19] Usol’tsev A.A. Elektricheskiye mashiny [Electric cars]. Sankt-Petersburg, NIU ITMO publ., 2013. 416 p.
[20] Kazachkovskiy N.N., Yakupov D.V. Programmirovaniye preobrazovatelya chastoty ALTIVAR 31 [Programming frequency converter ALTIVAR 31]. Dnepropetrovsk, Shneyder Elektrik publ., 2006. 45 p.