Calculating the Load on the Rod Suspension in Unsteady Oscillation Motion of the Well Pumping Unit Rods

The efficiency of a rod pumping unit is determined by the straightness of its rod string, which is impacted by the load when the rod string is in motion. Determining the dependence of the load impacting the rod suspension on the dynamic forces is one of the major issues in ensuring its straightness. In order to provide equal distribution of the stresses along the entire length of the polished rod under dynamic loading, it is necessary to determine the load on its surface, which is impossible without the equation of unsteady motion of the rod string. To this end, the article examines the issues related to the equation of unstable motion of well pumping unit rods. Formulae for calculating the loads acting on the rod suspension point are derived, and the equation of the rod string motion and load on the polished rod after the initial deformation is obtained.

References

[1] Mamedov V.T., Mamedov G.A., Aslanov J.N. Stress-Strain State of Sealing Rubber Membranes at Large Deformations. Journal of applied mechanics and technical physics, 2020, vol. 61, pp. 286–291. Available at: https://link.springer.com/article/10.1134/S0021894420020157 (accessed 10 May 2020).

[2] Dyshin O.A., Gabibov I.A., Aslanov J.N., Suleimanova A.D. Fractal analysis of structural and mechanical characteristics of an interfacial region in epoxy polymer nanocomposites. Journal of applied mechanics and technical physics, 2020, vol. 61, pp. 669–675. Available at: https://link.springer.com/article/10.1134/S0021894420040215 (accessed 20 May 2020).

[3] Aslanov J.N., Malik A.S., Seydi H.Z. The management of characteristics of the new two-layer rubber matrix seals. EUREKA: Physics and Engineering, 2020, no. 5, pp. 60–68, doi: https://doi.org/10.21303/2461-4262.2020.001401

[4] Aliverdizade K.S. Balansirnyye individual’nyye privody glubinonasosnoy ustanovki, (stanki-kachalki) [Individual balancing drives of the deep-pump unit (rocking machines)]. Baku, Aznefteizdat publ., 1951. 215 p.

[5] Molchanov G.V., Molchanov A.G. Mashiny i oborudovaniye dlya dobychi nefti i gaza [Machinery and equipment for oil and gas production]. Moscow, Nedra publ., 1984. 464 p.

[6] Adonin A.N. Dobycha nefti shtangovymi nasosami [Oil production by rod pumps]. Moscow, Nedra publ., 1979. 213 p.

[7] Yusifov S.I., Mamedov V.T., Damirova D.R. Regulation of vibrations of rod string of submersible sucker-rod pumps in case of a stike. Neftepromyslovoye delo, 2014, no. 2, pp. 35–38 (in Russ.).

[8] Mirzadzhanzade A.Kh., Kerimov Z.G., Kopeykis M.G. Teoriya kolebaniy v neftepromyslovom dele [Theory of fluctuations in the oil field]. Moscow, Izhevsk, Institut komp’yuternykh issledovaniy publ., 2005. 363 p.

[9] Makarov P.V., Eremin M.O. Jerky flow model as a basis for research in deformation instabilities. Fiz. mezomekh., 2013, vol. 16, no. 4, pp. 109–128 (in Russ.).

[10] Gorban’ I.I. Criteria and parameters of statistical instability. Matematicheskiye mashiny i sistemy, 2012, no. 4, pp. 106–114 (in Russ.).

[11] Chertova N.V. Dynamic field of defects for creep under monotonically changing stress. Theoretical and Applied Fracture Mechanics, 2000, vol. 34, no. 3, pp. 205–210, doi: 10.1016/S0167-8442(00)00036-7

[12] Grinyayev Yu.V., Chertova N.V. Description of creep in the framework of field defect theory. Prikladnaya mekhanika i tekhnicheskaya fizika, 2000, vol. 41, no. 3, pp. 177–183 (in Russ.).

[13] Chertova N.V., Grinyayev Yu.V. Analysis of the duration of creep processes in the framework of field defect theory. Pis’ma v ZHTF, 2000, vol. 26, no. 16, pp. 57–62 (in Russ.).

[14] Yoshida S. Consideration on fracture of solid-state materials. Physics letters A, 2000, vol. 270, pp. 320–325.

[15] Yoshida S. Dynamics of plastic deformation based on restoring and energy dissipative mechanisms in plasticity. Fiz. mezomekh., 2008, vol. 11, no. 2, pp. 31–38 (in Russ.).