Digital technology in information selection and transformation to control and support the product lifecycle

The paper considers possibilities of the digital technologies to control and manage each stage of the product lifecycle. The main software systems used to control and manage the product lifecycle at various stages are provided. Based on analyzing a number of scientific publications, assessment was made of the implementation level of such software products at each stage of the product lifecycle, and advantages of their introduction are presented. It is noted that mechanical engineering is the leader in implementing the appropriate digital technologies. The other industries are just adapting the previously developed technologies to specific conditions of the production process. However, certain issues of using modern digital technologies, in particular the blockchain, in relation to separate stages of the product lifecycle are still insufficiently studied. The basis of a new digital technology to control, manage and support the product lifecycle was developed, i.e. technology for selecting and transforming the necessary information into the product digital environment, in particular, in the mechanical engineering products in general. The essence of the proposed technology is briefly stated. Main differences from the existing blockchain technologies are listed regarding efficiency (since the software is constantly updated with more advanced versions) and incomplete data availability, which is due to maintaining the required level of security.

References

[1] Glezman L.V., Butorin S.N., Glavatskiy V.B. Digitalization of industry as a factor of technological development of the regional spatial and industrial structure. Voprosy innovatsionnoy ekonomiki [Russian Journal of Innovation Economics], 2020, vol. 10, no. 3, pp. 1555–1570, doi: http://doi.org/10.18334/vinec.10.3.110762 (in Russ.).

[2] Balashova E.S., Mayorova K.S. Analysis of directions of digital technologies introduction into industrial complex. Nauchno-tekhnicheskie vedomosti SPbGPU. Ekonomicheskie nauki [St. Petersburg State Polytechnical University Journal. Economics], 2020, vol. 13, no. 2, pp. 18–29, doi: http://doi.org/10.18721/JE.13202 (in Russ.).

[3] Kutin A.A., Ivashin S.S. Forecast for development of digital engineering industries. Innovatsii [Innovations], 2016, no. 8, pp. 9–12. (In Russ.).

[4] Dubrovina N.A. Innovative technologies in machinery. Vestnik Samarskogo universiteta. Ekonomika i upravlenie [Vestnik of Samara University. Economics and Management], 2021, vol. 12, no. 1, pp. 108–115, doi: https://doi.org/10.18287/2542-0461-2021-12-1-108-115 (in Russ.).

[5] Ogorodnikova O.M. Research function of SAE programs in the open-end SAE/CAD/SAE/CAM technologies. Vestnik mashinostroeniya, 2012, no. 1, pp. 25–31. (In Russ.).

[6] Bulavin V.F., Yakhrichev V.V., Stepanov A.S. Policy of digital technologies in small machine-building enterprises. Izvestiya vysshikh uchebnykh zavedeniy. Mashinostroenie [BMSTU Journal of Mechanical Engineering], 2019, no. 9, pp. 35–45, doi: http://dx.doi.org/10.18698/0536-1044-2019-9-35-45 (in Russ.).

[7] Bednarzhevskiy V.S., Dobrotina G.B. Review CAD/CAM/CAE-systems for modeling and designing a machine-building equipment. Izvestiya AltGU [Izvestiya of Altai State University], 2002, no. 5, pp. 118–121. (In Russ.).

[8] Panochevnyy P.N., Nekrasov V.R. Application of CAD/CAM/CAE technologies in modern machine building. Nauchno-prakticheskie issledovaniya, 2018, no. 3, pp. 128–132. (In Russ.).

[9] Devzheeva T.G., Kalinkin A.K. Relevance of application of information technologies in mechanical engineering. Uchenye zapiski Almetyevskogo gosudarstvennogo neftyanogo instituta, 2015, vol. 13, no. 1, pp. 271–276. (In Russ.).

[10] Stupnytskyy V., Hrytsay I. Comprehensive analysis of the product’s operational properties formation considering machining technology. Arch. Mech. Eng., 2020, vol. 67, no. 2, pp. 149–167, doi: http://doi.org/10.24425/ame.2020.131688

[11] GOST R 53791–2010. Resursosberezhenie. Stadii zhiznennogo tsikla izdeliy proizvodstvenno-tekhnicheskogo naznacheniya. Obshchie polozheniya [State standard GOST R 53791–2010. Resources saving. Stages of products technological cycle. General principles]. Moscow, Standartinform Publ., 2011. 8 p. (In Russ.).

[12] Yakutin Yu.V. The Russian economy: a strategy for digital transformation (constructive criticism of the government programme "Digital economy of the Russian federation "). Menedzhment i biznes-administrirovanie [Management and Business Administration], 2017, no. 4, pp. 27–52. (In Russ.).

[13] Kholopov V.A., Kashirskaya E.N., Kushnir A.P. et al. Development of digital machine-building production in the industry 4.0. Problemy mashinostroeniya i nadezhnosti mashin, 2018, no. 4, pp. 97–103, doi: https://doi.org/10.31857/S000523100000603-7 (in Russ.). (Eng. version: Concept. J. Mach. Manuf. Reliab., 2018, vol. 47, no. 4, pp. 380–385, doi: https://doi.org/10.3103/S1052618818040064)

[14] Evgenev G.B., Kokorev A.A., Pirimyashkin M.V. Development of intelligent 3d system for design of elements. Part 2. Inzhenernyy vestnik [Engineering Bulletin], 2016, no. 2. URL: http://www.ainjournal.ru/doc/834324.html (in Russ.).

[15] Evgenev G.B. Osnovy avtomatizatsii tekhnologicheskikh protsessov i proizvodstv. T. 1. Informatsionnye modeli [Basics of technological processes and production. Vol. 1. Information models]. Moscow, Bauman MSTU Publ., 2015. 441 p. (In Russ.).

[16] Evgenev G.B. Industry 5.0 as an integration of the internet of knowledge the internet of things. Ontologiya proektirovaniya [Ontology of Designing], 2019, vol. 9, no. 1, pp. 7–23, doi: http://doi.org/10.18287/2223-9537-2019-9-1-7-23 (in Russ.).

[17] Ingemansson A.R. The analysis of modern scientific problem of creation of digital production systems for mechanical engineering industry. Izvestiya Volgogradskogo gosudarstvennogo tekhnicheskogo universiteta [Izvestia Volgograd State Technical University], 2019, no. 8, pp. 18–21. (In Russ.).

[18] Ingemansson A.R. Characteristics, composition, mechanisms of function and modern aspects of implementation of digital production systems in mechanical engineering industry. In: ICIE 2019. Springer, 2020, pp. 1167–1174, doi: http://doi.org/10.1007/978-3-030-22063-1_124

[19] Universalnye i instrumentalnye sistemy kompanii “SPRUT-Tekhnologiya” [Universal and tool systems of “SPRUT-technology company”|]. mashportal.ru: website. http://www.mashportal.ru/solutions-163.aspx (accessed: 15.10.2022). (In Russ.).

[20] Sistema avtomatizirovannogo proektirovaniya i tekhnicheski obosnovannogo normirovaniya tekhnologicheskikh protsessov «SPRUT-TP-Normirovanie» [SPRUT-TP-Normirovanie system for automated design and reasonable process standardization]. Svid. o gos. reg. progr. dlya EVM 2016615083 [Software registration certificate 2016615083]. Appl. 22.03.2016, publ. 16.05.2016. (In Russ.).

[21] Li J., Greenwood D., Kassem M. Blockchain in the built environment and construction industry: a systematic review, conceptual models and practical use cases. Autom. Constr., 2019, vol. 102, pp. 288–307, doi: https://doi.org/10.1016/j.autcon.2019.02.005

[22] Ko T., Lee J., Ryu D. Blockchain technology and manufacturing industry: real-time transparency and cost savings. Sustainability, 2018, vol. 10, no. 11, art. 4274, doi: http://doi.org/10.3390/su10114274

[23] Javaid M., Haleem A., Pratap Singh R. et al. Blockchain technology applications for Industry 4.0: a literature-based review. Blockchain: Research and Applications, 2021, vol. 2, no. 4, art. 100027, doi: http://doi.org/10.1016/j.bcra.2021.100027

[24] Fraga-Lamas P., Fernández-Caramés T.M. A review on blockchain technologies for an advanced and cyber-resilient automotive industry. IEEE Access, 2019, vol. 7, pp. 17578–17598, doi: https://doi.org/10.1109/ACCESS.2019.2895302

[25] Sree K. Blockchain technology and digital engineering. Int. Conf. on Sustainability, 2018. URL: https://www.researchgate.net/publication/325677392_Blockchain_technology_and_Digital_engineering (accessed: 14.07.2022).

[26] Brom A.E., Terentyeva Z.S. Use of the blockchain technology in product lifecycle management. Vestnik Volzhskogo universiteta imeni V.N. Tatishcheva [Vestnik of Volzhsky University after V.N. Tatischev], 2018, vol. 2, no. 1, pp. 118–124. (In Russ.).

[27] [Information and analytical review. Prospects of using blockchain technology in the organization of railway transportation]. ERAI, 2018. URL: https://index1520.com/upload/medialibrary/e7b/Blockchain_2019_12_12.pdf (accessed: 14.07.2022). (In Russ.).

[28] Zareiyan B., Korjani M. Blockchain technology for global decentralized manufacturing: challenges and solutions for supply chain in fourth industrial revolution. Int. J. Adv. Robot. Automn., 2018, vol. 3, no. 2, pp. 1–10, doi: http://doi.org/10.15226/2473-3032/3/2/00135

[29] Abramyan S.G., Burlachenko O.V., Oganesyan O.V. et al. Role of digital technologies in construction and in increasing the residual resource of industrial and construction products. Vestnik VolgGASU. Ser. Stroitelstvo i arkhitektura [Bulletin of Volgograd State University of Architecture and Civil Engineering Series: Civil Engineering and Architecture], 2020, no. 4, pp. 429–437. (In Russ.).

[30] Kukhar V.D., Malikov A.A., Sabinina A.L. et al. The ways of machine - building production life cycle organization. Izvestiya TulGU. Tekhnicheskie nauki [News of the Tula State University. Technical Sciences], 2012, no. 12–2, pp. 302–314. (In Russ.).

[31] Dorosinskiy L.G., Zvereva O.M. Informatsionnye tekhnologii podderzhki zhiznennogo tsikla izdeliya [Information technologies to support the product life cycle]. Ulyanovsk, Zebra Publ., 2016. 243 p. (In Russ.).

[32] Petrushin S.I., Gubaydulina R.Kh. Organizatsiya zhiznennogo tsikla izdeliy mashinostroeniya [Life cycle organization of mechanical engineering products]. Tomsk, Izd-vo TPU Publ., 2012. 200 p. (In Russ.).

[33] Sudov E.V. Integrirovannaya informatsionnaya podderzhka zhiznennogo tsikla mashinostroitelnoy produktsii [Integrated information support of a lifecycle of machine building products]. Moscow, MVM Publ., 2003. 264 p. (In Russ.).

[34] Dudanov E. Application of automated systems for distributed design of design and technological documentation at mechanical engineering enterprises. SAPR i grafika, 2019, no. 1, pp. 48–49. (In Russ.).

[35] Evgenev G.B., Kuzmin B.V., Rubakhina V.I. Methods and tools for product lifecycle management in mechanical engineering. Sistemy upravleniya, svyazi i bezopasnosti [Systems of Control, Communication and Security], 2015, no. 4, pp. 198–216. (In Russ.).

[36] Chemodurov A.N. The use of additive technologies in the production of engineering products. Izvestiya TulGU. Tekhnicheskie nauki [News of the Tula State University. Technical Sciences], 2016, no. 8–2, pp. 210–217. (In Russ.).