Mathematical model of a wave gear with the external deformation waves generator

The paper considers a spatial mathematical model of a wave gear with the annular generator of the external deformation waves. Calculation method was based on determination of the elastic interaction between flexible wheel, rigid wheel and wave generator. Numerical studies confirmed the adequacy of the proposed mathematical model. Theoretical studies of the influence of preload in the gearing and initial clearance between the flexible wheel and the deforming washers on the forces acting on the wave generator bearings were conducted. It is shown that a decrease in the specified clearance leads to an increase in loads on the bearings. By calculation, torsional rigidity characteristics of the wave gear with an external deformation generator were obtained for various interference values in the gearing and the clearance.

References

[1] Ivanov M.N. Volnovye zubchatye peredachi [Wave gear transmissions.]. Moscow, Vysshaya shkola Publ., 1981. 184 p. (In Russ.).

[2] Ginzburg E.G. Volnovye zubchatye peredachi [Wave gear transmissions]. Leningrad, Mashinostroenie Publ., 1969. 159 p. (In Russ.).

[3] Yangulov V.S. Volnovye i vintovye mekhanizmy i peredachi [Wave and screw mechanisms and transmissions]. Tomsk, Izd-vo TPU Publ., 2011. 184 p. (In Russ.).

[4] Poletuchiy A.I. Teoriya i konstruirovanie vysokoeffektivnykh volnovykh zubchatykh mekhanizmov [Theory and design of high-efficiency wave gear mechanisms]. Kharkov, Izd-vo NAU KhAI Publ., 2005. 675 p. (In Russ.).

[5] Ardelean F.A. 3D modeling of the harmonic drive using "CATIA". Annals of the Oradea University, 2007, vol. 6, no. 16, pp. 882–885. (In Russ.).

[6] Dhaouadi R., Ghorbel F.H. Modelling and analysis of nonlinear stiffness, hysteresis and friction in harmonic drive gear. Int. J. Model. Simul., 2008, vol. 28, no. 3, pp. 329–336, doi: https://doi.org/10.1080/02286203.2008.11442485

[7] Lyuminarskiy I.E., Lyuminarskiy S.E., Lyuminarskaya E.S. The influence of the degree of accuracy gears on the kinematic error of the wave gear. Fundamentalnye i prikladnye problemy tekhniki i tekhnologii [Fundamental and Applied Problems of Engineering and Technology], 2022, no. 4, pp. 11–16. (In Russ.).

[8] Lyuminarskiy S.E., Lyuminarskiy I.E. Matematical model of a harmonic drive with the disk wave generator. Mashinostroenie i inzhenernoe obrazovanie, 2012, no. 2, pp. 45–52. (In Russ.).

[9] Timofeev G.A. Razrabotka metodov rascheta i proektirovaniya volnovykh zubchatykh peredach dlya privodov sledyashchikh sistem. Diss. dok. tekh. nauk [Development of calculation and design methods for wave gears of servo drives. Doc. tech. sci. diss.]. Moscow, In-t mashinovedeniya, 1997. 352 p. (In Russ.).

[10] Timofeev G.A., Kostikov Yu.V., Fursyak F.I. External deformation wave reducers. Vestnik mashinostroeniya, 1977, no. 1, p. 21. (In Russ.).

[11] Kostikov Yu.V., Timofeev G.A., Fursyak F.I. Torsional stiffness of external deformation wave gears. Privody i komponenty mashin, 2013, no. 1, pp. 10–13. (In Russ.).

[12] Timofeev G.A., Kostikov Yu.V. Analysis of torsional stiffness of harmonic gear drives. Vestnik mashinostroeniya, 2016, no. 9, pp. 28–31. (In Russ.).

[13] Tarabarin V.B., Timofeev G.A. Volnovaya peredacha [Wave gear]. Patent SSSR 541057. Appl. 14.08.1973, publ.30.12.1976. (In Russ.).

[14] Beyzelman R.D., Tsypkin B.V., Perel L.Ya. Podshipniki kacheniya [Rolling bearings]. Moscow, Mashinostroenie Publ., 1975. 572 p. (In Russ.).