Application of the technique of ultra-jet diagnostics in the analysis of the wear resistance of paint and varnish coatings of aviation equipment

The issue of applying a method for assessing the wear resistance of paint and varnish coatings by the method of ultra-jet discrete diagnostics based on the interaction of high-speed liquid jets with a movable (rotating) target is considered. The result of the implementation of the method is an assessment of the residual area of the paint coating on the target sample. The relations allowing to connect the results of the experiment with the corresponding operating time of aviation equipment in airplane hours, on the basis of civil passenger aircraft, are derived.
EDN: GDDCVV, https://elibrary/gddcvv

References

[1] Abashin M.I., Galinovskiy A.L., Provatorov A.S. et al. Modeling of the process of diagnostics of nanostructured coatings by adhesiometer and ultrashort method. Vestnik RGATA im. P.A. Solovyeva, 2014, no. 4, pp. 9–16. (In Russ.).

[2] Abashin M.I., Galinovskiy A.L., Khafizov M.V. et al. [Ultrajet diagnostics of thin-film coatings]. Energo- i resursosberezhenie — XXI vek [Energy and Resources Saving – XXI Century]. Orel, Gosuniversitet-UNPK Publ., 2014, pp. 148–150. (In Russ.).

[3] Provatorov A.S., Galinovskiy A.L. [Accelerated determination of operational and technological characteristics of parts with nanostructured coatings by the results of their exposure to a high-speed hydrojet]. Perspektivnye podkhody i tekhnologii proektirovaniya i proizvodstva detaley i izdeliy aerokosmicheskoy tekhniki [Perspective approaches and technologies of design and production of parts and products of aerospace engineering]. Moscow, Diona Publ., 2017, pp. 16–18. (In Russ.).

[4] Abashin M.I., Barzov A.A., Galinovskiy A.L. et al. Ultra-jet express diagnostics of materials and engineering products. Nauchno-tekhnicheskie vedomosti SPbGPU [St. Petersburg Polytechnic University Journal], 2011, no. 2, pp. 141–147. (In Russ.).

[5] Barzov A.A., Belov V.A., Galinovskiy A.L. et al. Engineering and technological methods of ultra-jet diagnostics of complex-profiled products made of composite materials. Klyuchevye trendy v kompozitakh: nauka i tekhnologii [Key Trends in Composites: Science and Technologies]. Moscow, Diona Publ., 2018, pp. 89–92. (In Russ.).

[6] Anicetus O., McKenna S., Flynn D. et al. Identifying paintwork deterioration for image-based monitoring of distribution towers. IEEE PESGM, 2022, doi: https://doi.org/10.1109/PESGM48719.2022.9916591

[7] Bekana D., Kadirova S., Kolev Z. et al. Investigation of operational parameters of coatings for rebuilding worn out cast iron parts of self-propelled agricultural machine. INMATEH Agric. Eng., 2022, vol. 62, no. 3, pp. 165–172, doi: https://doi.org/10.35633/inmateh-62-17

[8] Karpukhin E.G., Chorokaev O.E. Analysis of existing models for assessing properties of antifriction coatings of aviation equipment. Izvestiya samarskogo nauchnogo tsentra RAN [Izvestia RAS SamSC], 2018, no. 4–3, pp. 417–421. (In Russ.).

[9] Evstafyeva N.Yu., Akchurin T.K., Stefanenko I.V. Polymer systems of waterproofing and corrosion protection of building materials and structures. Vestnik VolgGASU. Ser. Stroitelstvo i arkhitektura [Bulletin of Volgograd State University of Architecture and Civil Engineering], 2018, no. 53, pp. 43–52. (In Russ.).

[10] Gould P. Smart, clean surfaces. Mater. Today, 2003, vol. 6, no. 11, pp. 44–48, doi: https://doi.org/10.1016/S1369-7021(03)01131-3

[11] Protasova Yu.A., Sheremetyeva O.A., Korovchenko A.V. Monitoring of fire protection compositions applied in the territory of krasnoyarsky krai for passive fire protection of wooden structures. Aktualnye problemy bezopasnosti v tekhnosfere [Actual Security Problems in the Technosphere], 2021, no. 4, pp. 37–42. (In Russ.).

[12] Benvenuti L., De Santis A. A design methodology for commercial aircraft formation flight plans with minimal fuel consumption. IEEE Trans. Aerosp. Electron. Syst., 2024, vol. 60, no. 4, pp. 4157–4169, doi: https://doi.org/10.1109/TAES.2024.3375838

[13] Ekici S., Ayar M., Orhan I. et al. Cruise altitude patterns for minimizing fuel consumption and emission: a detailed analysis of five prominent aircraft. Energy, 2024, vol. 295, no. 5, art. 130989, doi: https://doi.org/10.1016/j.energy.2024.130989

[14] Atasoy V.E. Detailed analysis of aircraft fuel flow using data from flight data recorder. Transp. Res. Rec., 2023, vol. 2677, no. 6, pp. 759–772, doi: https://doi.org/10.1177/03611981221150401

[15] MIL-STD-810F. Department of defense test method standard for environmental engineering considerations and laboratory tests. USA Department of defense, 2000. 539 p.

[16] Ryder C.L., Bézier C., Dacre H.F. et al. Aircraft engine dust ingestion at global airports. HNESS, 2024, vol. 24, no. 7, pp. 2263–2284, doi: https://doi.org/10.5194/nhess-24-2263-2024

[17] Galinovskiy A.L., Mikhaylov A.A., Martysyuk D.A. et al. Effectiveness analysis of method for assessment of wear resistance of paint coatings, using high-speed liquid jet. Vse materialy Entsiklopedicheskiy spravochnik [All Materials. Encyclopaedic Reference Manual], 2023, no. 8, pp. 30–36. (In Russ.).

[18] Galinovskiy A.L., Mikhaylov A.A., Martysyuk D.A. et al. Analysis of wear resistance of three-component paint-and-lacquer coating, using ultra-jet diagnostics technology. Tekhnologiya metallov, 2024, no. 10, pp. 18–25. (In Russ.).