Developing a Method of Hydroerosive Saturation of Liquids with Microparticles of Target Materials Using Ultrajet

This paper presents a study on innovative use of ultrajet technologies and expanding their areas of applications. Factors influencing the process of ultrajet dispersing are determined, based on which special tooling is developed and operating modes and parameters are selected. The results of experimental studies on dispersing silver and copper targets are presented. The composition of the obtained suspensions and features of the particles formed in the process of hydroerosion of the material surface (targets) are examined. It is determined that the proposed technology possesses broad capabilities and advantages compared to traditional methods of obtaining suspensions.

References

[1] Belov V.A., Vel’tishchev V.V., Ilyukhina A.A., Mugla D.R. Eksperimental’noye opredeleniye ratsional’nykh parametrov elementov struyeformiruyushchego trakta ustanovki dlya podvodnoy gidroabrazivnoy rezki materialov. Herald of the Bauman Moscow State Technical University. Series Mechanical Engineering, 2018, no. 7, pp. 4–12 (in Russ.).

[2] Barzov A.A., Galinovskiy A.L., Provatorov A.S. Information-physical mechanism of diagnostic of functional coatings erosive wear by water jet. Uprochnyayushchiye tekhnologii i pokrytiya, 2019, no. 2, pp. 51–57 (in Russ.).

[3] Galinovskiy A.L., Chzho M’o Khtet, Provatorov A.S. On effectiveness problem of different methods of nanocontaining suspension dispersion. Vse materialy. Entsiklopedicheskiy spravochnik, 2019, no. 11, pp. 2–7, doi: 10.31044/994-6260-2019-0-11-2-7

[4] Singh M.K., Ratha D., Kumar S., Kumar D. Influence of particle-size distribution and temperature on rheological behavior of coal slurry. International Journal of Coal Preparation and Utilization, 2016, vol. 36, iss. 1, pp. 44–54, doi: 10.1080/19392699.2015.1049265

[5] Barzov A.A., Belov V.A., Vinogradova E.P., Sysoyev N.N., Khakhalin A.V. Functional and technological capabilities of thermophysical control of ultra-jet hydrocontact interactions. Preprint Fizicheskogo fakul’teta MSU, 2018, no. 4, pp. 1–39 (in Russ.).

[6] Singh A., Mari R., Denn M.M., Morris J.F. A constitutive model for simple shear of dense frictional suspensions. Journal of Rheology, 2018, vol. 62, iss. 2, pp. 457–468, doi: 10.1122/1.4999237

[7] Abashin M.I., Barzov A.A., Galinovskiy A.L., Mazayeva I.V., Sysoyev N.N. Ul’trastruynaya gidrodinamika (tekhnologii i ekonomika) [Ultra-jet hydrodynamics (technology and economics)]. Moscow, MSU publ., 2015. 308 p.

[8] Puzakov V.S. Razrabotka i analiz funktsional’nykh vozmozhnostey ul’trastruynoy aktivatsii gidrotekhnologicheskikh sred dlya mekhanoobrabatyvayushchego proizvodstva . Avtoref. Kand. Diss. [Development and analysis of the functionality of ultra-jet activation of hydrotechnological environments for machining production. Abstract Cand. Diss.]. Moscow, Bauman Press, 2007. 16 p.

[9] Sudnik L.V., Galinovskiy A.L., Kolpakov V.I., Mulyar S.G., Abashin M.I., Provatorov A.S. Modernization of technology of composite constructional ceramics operational dynamic properties estimating by means of a hydroabrasive ultrastream. Science and Education: Scientific Publication, 2014, no. 3, pp. 15–23 (in Russ.), doi: 10.7463/0314.0701307

[10] Kornilova A.A., Vysotskiy V.I., Sysoyev H.H., Litvin N.K., Tomak V.I., Barzov A.A. Shock-cavitation mechanism of X-ray at cavitational of fast water stream. Moscow University Physics. Bulletin, 2010, no. 1, pp. 46–50 (in Russ.).

[11] Barzov A.A., Vdovin A.A., Kibal’chenko A.V., Petukhov E.N. Sposob obrabotki vody [The method of water treatment]. Patent RF no. RUS 2031847, 1990.

[12] Tarasov V.A., Polukhin A.N. Estimation of Geometric Parameters of Formed Surface during Hydro-Abrasive Treatment. Herald of the Bauman Moscow State Technical University. Series Mechanical Engineering, 2012, no. 1, pp. 107–116 (in Russ.).

[13] Barzov A.A., Erofeyeva V.V., Sysoyev N.N., Sysoyev P.N., Yablochnikov S.L. Analysis of the influence of structural latent factors of physical and technological innovations on the potential of their functional effectiveness. Preprint Fizicheskogo fakul’teta MGU, 2018, no. 5, pp. 1–33 (in Russ.).

[14] Dickinson E. Colloids in Food: Ingredients, Structure, and Stability. Annual Review of Food Science and Technology, 2015, vol. 6, pp. 211–233. Available at: https://doi.org/10.1146/annurev-food-022814-015651

[15] Liu Y., Guo X., Lu H., Gong X., Sun X., Zhao W. An investigation of the effect of particle size on the flow behavior of pulverized coal. Procedia Engineering, 2015, vol. 284, pp. 698–713, doi: 10.1016/j.powtec.2015.06.041

[16] Leverrier C., Almeida G., Cuvelier G. Influence of particle size and concentration on rheological behaviour of reconstituted apple purees. Food Biophysics, 2016, vol. 11, iss. 3, pp. 235–247, doi: 10.1007/s11483-016-9434-7

[17] Gamonpilas C., Morris J.F., Denn M.M. Shear and normal stress measurements in non-Brownian monodisperse and bidisperse suspensions. Journal of Rheology, 2016, vol. 60, iss. 2, pp. 289–296, doi: 10.1122/1.4942230

[18] Mwasame P.M., Wagner N.J., Beris A.N. Modeling the effects of polydispersity on the viscosity of noncolloidal hard sphere suspensions. Journal of Rheology, 2016, vol. 60, iss. 2, pp. 225–240, doi: 10.1122/1.4938048

[19] Pednekar S., Chun J., Morris J.F. Simulation of shear thickening in attractive colloidal suspensions. Soft Matter, 2017, vol. 13, iss. 6, pp. 1773–1779, doi: 10.1039/c6sm02553f

[20] Wang M., Brady J.F. Spectral Ewald acceleration of Stokesian Dynamics for polydisperse suspensions. Journal of Computational Physics, 2016, vol. 306, pp. 443–477, doi: 10.1016/j.jcp.2015.11.042