Studying resonance characteristics of the of drawing installation oscillatory systems

The paper presents review and numerical analytical calculation of the most common ultrasonic oscillatory systems. Resonance characteristics of the waveguides were measured at their analysis stage using the ANSYS CAE system. Resonant characteristics of the manufactured acoustic systems were measured on the experimental ultrasonic equipment. Distinctive features of the bimetallic copper-silver wire being a promising material for medical use, electronic components and measuring transducers are provided. Technique was developed for synthesizing and analyzing the waveguide systems for drawing the bimetallic copper-silver wire excluding the waveguide fitting operation in its manufacture. Study results are expanding scientific knowledge in the methodology of synthesis and analysis of the ultrasonic oscillatory systems of the drawing installations and could be used in design of the ultrasonic equipment.

References

[1] Klubovich V.V., Rubanik V.V., Tsarenko Yu.V. Ultrazvuk v tekhnologii proizvodstva kompozitsionnykh kabeley [Ultrasound in the technology of composite cable production]. Minsk, Belorusskaya nauka Publ., 2012. 295 p. (In Russ.).

[2] Severdenko V.P., Klubovich V.V., Stepanenko A.V. Ultrazvuk i plastichnost [Ultrasound and plasticity]. Minsk, Nauka i tekhnika Publ., 1976. 448 p. (In Russ.).

[3] Kiselev E.S. Intensifikatsiya protsessov mekhanicheskoy obrabotki ispolzovaniem energii ultrazvukovogo polya [Intensification of machining processes using the energy of the ultrasonic field]. Ulyanovsk, UlGTU Publ., 2003. 186 p. (In Russ.).

[4] Kulemin A.V. Ultrazvuk i diffuziya v metallakh [Ultrasonic and diffusion in metals]. Moscow, Metallurgiya Publ., 1978. 200 p. (In Russ.).

[5] Teumin I.I. Ultrazvukovye kolebatelnye sistemy [Ultrasonic vibrating systems]. Moscow, Mashgiz Publ., 1959. 331 p. (In Russ.).

[6] Abramova A.V. Analysis of methods of calculation and design of waveguide systems for ultrasonic technological installation. Materialy, tekhnologii, instrumenty, 2012, vol. 17, no. 3, pp. 90–96. (In Russ.).

[7] Severdenko V.P., Klubovich V.V., Stepanenko A.V. Prokatka i volochenie s ultrazvukom [Rolling and drawing with ultrasound]. Minsk, Nauka i tekhnika Publ., 1970. 287 p. (In Russ.).

[8] Klubovich V.V., Rubanik V.V. Ustroystvo dlya volocheniya metalla s ispolzovaniem ultrazvukovykh kolebaniy [Apparatus for drawing metal with use of ultrasonic oscillations]. Patent USSR 778853. Appl. 16.11.1978, publ. 15.11.1980. (In Russ.).

[9] Rozenberg L.D., ed. Fizika i tekhnika moshchnogo ultrazvuka. Kn. 1. Istochniki moshchnogo ultrazvuka [Physics and technique of power ultrasound. Vol. 1 Sources of power ultrasound]. Moscow, Mashinostroenie Publ., 1967. 380 p. (In Russ.).

[10] Severdenko V.P., Klubovich V.V., Stepanenko A.V. Obrabotka metallov davleniem s ultrazvukom [Metal pressure treatment with ultrasound]. Minsk, Nauka i tekhnika Publ., 1973. 288 p. (In Russ.).

[11] Suchkov A.G. Ustroystvo dlya volocheniya trub s primeneniem radialnykh ultrazvukovykh kolebaniy [Tube drawing apparatus using radial ultrasonic oscillations]. Patent RU 2271889. Appl. 27.10.2004, publ. 20.03.2006. (In Russ.).

[12] Astashev V.K., Semenova E.B. Ustroystvo dlya volocheniya izdeliy s ispolzovaniem ultrazvukovykh kolebaniy [Device for drawing articles with the use of ultrasonic vibrations]. Patent USSR 1731334. Appl. 24.01.1990, publ. 07.05.1992. (In Russ.).

[13] Klubovich V.V., Rubanik V.V., Bobrov V.P. et al. Golograficheskiy metod issledovaniy rezhimov raboty kolebatelnoy sistemy [Holographic method of investigating the modes of operation of vibrating system]. Ruk. dep. v VINITI no. 3244-V89. 11 p. (In Russ.).