Calculation and correction of the fuel mixture elastic properties values

The paper substantiates the use of a simple and convenient Cole equation form of state making it possible to quickly and with sufficient accuracy determine density, compressibility coefficient and speed of sound of the fuel mixtures at high and ultrahigh injection pressures. A method is described for calculating these elastic properties of the fuel mixtures using the constants of the state equation selected in the form of expressions that determine dependence of the constants on the temperature. Expediency of introducing the universal correction factors is shown, which allows refining calculated values of the fuel mixture elastic properties. Processed experimental data from the literature sources and conducted studies formed the basis to obtain empirical coefficients to determine the correction factors that are refining values of the arbitrary composition mixture properties. The described method and the found coefficients make it possible to hydrodynamically calculate the fuel supply process using modern mathematical models and to design new fuel systems with the higher injection parameters.

References

[1] Londhekar Atul G., Kongre S.C. Effects of different additives on performance and emission of biodiesel fuelled compression ignition engine. Int. J. Sci. Res., 2017, vol. 6, no. 2, pp. 1947–1952.

[2] Knothe G., Razon L.F. Biodiesel fuels. Prog. Energy Combust. Sci., 2017, vol. 58, pp. 36–59, doi: http://dx.doi.org/10.1016/j.pecs.2016.08.001

[3] Bhat S.N., Shenoy S., Dinesha P. Effect of bio-ethanol on the performance and emission of a biodiesel fueled compression ignition engine. MATEC Web Conf., 2018, vol. 144, art. 04017, doi: https://doi.org/10.1051/matecconf/201814404017

[4] Peterson C.L. Vegetable oil as a diesel fuel: status and research priorities. Trans. ASAE, 1986, vol. 29, no. 5, pp. 1413–1422, doi: https://doi.org/10.13031/2013.30330

[5] Hoekman S.K., Broch A., Robbins C. et al. Review of biodiesel composition, properties, and specifications. Renew. Sustain. Energy Rev., 2012, vol. 16, no. 1, pp. 143–169, doi: https://doi.org/10.1016/j.rser.2011.07.143

[6] Subramanian T., Geo V.E., Jesu M.L. et. al. Effects of low carbon bio fuel blends with karanja oil methyl ester in a single cylinder CI engine on CO2 emission and other performance and emission characteristics. Nat. Environ. Pollut. Technol., 2016, vol. 15, no. 4, pp. 1249–1256.

[7] Karagöz Y., Sandalc T., Koylu U.O. et. al. Effect of the use of natural gas–diesel fuel mixture on performance, emissions, and combustion characteristics of a compression ignition engine. Adv. Mech. Eng., 2016, vol. 8, no. 4, doi: https://doi.org/10.1177/1687814016643228

[8] Grekhov L.V., Markov V.A., Arsenov N.A. et al. Analysis and correction of individual property values of motor fuels and other liquids. Izvestiya vysshikh uchebnykh zavedeniy. Mashinostroenie [BMSTU Journal of Mechanical Engineering], no. 7, 2022, pp. 49–67, doi: https://doi.org/10.18698/0536-1044-2022-7-49-67 (in Russ.).

[9] Tammann G.H.J.A. Ueber die Beziehungen zwischen den inneren Kraften und Eigenschaften der Losungen. Leipzig, L.Voss, 1907. 202 p.

[10] Schaschke C., Fletcher I., Glen N. Density and viscosity measurement of diesel fuels at combined high pressure and elevated temperature. Processes, 2013, vol. 1, no. 2, pp. 30–48, doi: https://doi.org/10.3390/pr1020030

[11] Redlich O., Kwong J.N. On the thermodynamics of solutions. V. An equation of state. Fugacities of gaseous solutions. Chem. Rev., 1949, vol. 44, no. 1, pp. 233–244, doi: https://doi.org/10.1021/cr60137a013

[12] Kalinovskiy Yu.V., Sadreev E.A. Calculating water contents in basic natural gas components and their water solubilities using cubic equations of state. Vesti gazovoy nauki, 2012, no. 3, pp. 61–75. (In Russ.).

[13] Cole R.H. Underwater explosions. Princeton Univ. Press, 1948. 437 p.

[14] Kurapin A.V., Salykin E.A., Tshibanda K.E. Indicator analysis of injection process of different composition mixtures of diesel fuel and palm oil at changing of speed mode of diesel engine. Proc. ICIE. Springer, 2021, pp. 720–729, doi: https://doi.org/10.1007/978-3-030-54817-9_83

[15] Dzida M., Żak A., Ernst S. Thermodynamic and acoustic properties of binary mixtures of alcohols and alkanes. I. Speed of sound in (ethanol+n-heptane) under elevated pressures. J. Chem. Thermodyn., 2005, vol. 37, no. 5, pp. 405–414, doi: https://doi.org/10.1016/j.jct.2004.10.001

[16] Giuliano Albo P.A., Lago S. Experimental speed-of-sound measurements of pure fatty acids methyl ester, mineral diesel and blends in a wide range of temperature and for pressures up to 300 MPa. Fuel, 2014, vol. 115, pp. 740–748, doi: https://doi.org/10.1016/j.fuel.2013.07.103

[17] Dzida M., Prusakiewicz P. The effect of temperature and pressure on the physicochemical properties of petroleum diesel oil and biodiesel fuel. Fuel, 2008, vol. 87, no. 10–11, pp. 1941–1948, doi: https://doi.org/10.1016/j.fuel.2007.10.010

[18] Torres-Jimenez E., Dorado M.P., Kegl B. Experimental investigation on injection characteristics of bioethanol-diesel fuel and bioethanol–biodiesel blends. Fuel, 2011, vol. 90, no. 5, pp. 1968–1979, doi: https://doi.org/10.1016/j.fuel.2010.11.042

[19] Dashti H.H., Riazi M.R. Acoustic velocities in petroleum fluids: measurement and prediction. J. Pet. Sci. Eng., 2014, vol. 124, pp. 94–104, doi: https://doi.org/10.1016/j.petrol.2014.10.013