Monitoring the locomotive diesel cylinder-piston group technical condition during the pre-start cold cranking
Authors: Grachev V.V., Grischenko A.V., Bazilevsky F.Y., Fedotov M.V., Panchenko M.N. | Published: 25.08.2023 |
Published in issue: #9(762)/2023 | |
Category: Energy and Electrical Engineering | Chapter: Turbomachines and Piston Engines | |
Keywords: crankshaft, instantaneous angular speed, starter motor current, medium-cycle angular speed, medium-cylinder angular speed, modulator teeth, starter motor operation |
High-speed diesel engines of small dimensions (with the cylinder diameter of up to 210 mm) are increasingly used as prime movers in the autonomous locomotives of various purposes. Characteristic design feature of many of them lies in the absence of indicator valves to connect devices measuring the intra-cylinder pressure (maximum meter or pressure sensor). It excludes the possibility of using diagnostic methods based on
the indicator analysis to control technical state of the cylinder-piston group of such engines based on analyzing diagrams of the working process inside the cylinder. This circumstance determines relevance of searching for other approaches to solve this problem. One of such approaches is based on monitoring parameters of the signal of the crankshaft instantaneous angular velocity and the starter motor current in the engine cold cranking mode. Based on analyzing alteration in the crankshaft instantaneous angular speed and the starter motor current in the cold cranking mode
during bench testing of the locomotive diesel, diagnostic parameters, indicators and criteria to monitor the diesel cylinders performance were proposed. Effectiveness of the proposed criteria was confirmed by analysis of the results of the diesel engine cold scrolling with the opened indicator cocks of individual cylinders. Using the proposed diagnostic criteria would improve operational reliability and reduce cost of the diesel
locomotive maintenance through rational planning the scope of work within the scheduled repair operations.
References
[1] Uralskiy dizel-motornyy zavod predstavil dizelnyy dvigatel novogo pokoleniya — DM-185 [Ural Diesel Engine Plant presented DM-185 – a new generation diesel engine]. sdelanounas.ru: website. URL: https://sdelanounas.ru/blogs/64560/ (accessed: 15.12.2022). (In Russ.).
[2] «PUL trans» nachala ispytaniya teplovoza novoy modeli TEM14M ["PUL Trans" started testing a TEM14M – a new model of diesel locomotive]. sdelanounas.ru: website. URL: https://sdelanounas.ru/blogs/139673/ (accessed: 15.12.2022). (In Russ.).
[3] Teplovoz TEM9. Rukovodstvo po ekspluatatsii 026.00.01.000–02RE [TEM9 diesel locomotive. Operating manual 026.00.01.000–02RE]. Moscow, OOO «TsIR STM» Publ., 2012. 333 p. (In Russ.).
[4] Kompleks diagnostiki i nastroyki dizeley KDN «Magistral» ["Magistral" complex for diagnostics and adjustment of diesel engines]. tehtrans–d.ru: website. URL: https://tehtrans-d.ru/catalog/tretja-kategorija/kompleks-diagnostiki-i-nastrojki-dizelej-kdn-magistral.html (accessed: 15.12.2022). (In Russ.).
[5] Baboshin A.A., Kosarev A.S., Malyshev V.S. Assessment of technical condition of the internal combustion engine according to the current consumed by the starter motor when scrolling. Vestnik MGTU [Vestnik of MSTU], 2013, vol. 16, no. 1, pp. 33–39. (In Russ.).
[6] Nechaev V.V., Vorobyev E.V., Tarasenko A.A. Techniques for technical diagnosis of cylinder–piston group of diesel engines with cold starting cranking of the crankshaft. Inzhenernyy vestnik Dona [Engineering journal of Don], 2018, no. 3. URL: www.ivdon.ru/ru/magazine/archive/n3y2018/5118 (in Russ.).
[7] Gunther H. Dieseldiagnose. Vogel, 2001.? 251 p. (Russ. ed.: Diagnostika dizelnykh dvigateley. Moscow, Za rulem Publ., 2007. 176 p.)
[8] Bulatovic Z.M., Stavljanin M.S., Tomic M.V. et al. Measurement and analysis of angular velocity variations of twelve–cylinder diesel engine crankshaft. Mech. Syst. Signal Process., 2011, vol. 25, no. 8, pp. 3043–3061, doi: https://doi.org/10.1016/j.ymssp.2011.05.002
[9] Taraza D., Henein N.A., Bryzik W. Diesel engine diagnosis based on analysis of the Crankshaft’s speed variation. SAE Tech. Pap., 1998, no. 982540, doi: https://doi.org/10.4271/982540
[10] Lin T.R., Tan A.C.C., Ma L. et al. Condition monitoring and fault diagnosis of diesel engine instantaneous angular speed analysis. Proc. Inst. Mech. Eng. C, 2014, vol. 229, no. 2, pp. 304–315, doi: https://doi.org/10.1177/0954406214533253
[11] Tryuber S.S. Powerful diesel engine diagnostics methods based on rotational speed non-uniformity. Vestnik SGTU, 2007, no. 1, pp. 64–71. (In Russ.).
[12] Avrunin A.G., Arinkin V.V., Andreev N.N. et al. Teplovoznye i sudovye dizeli D50 [D50 diesel and marine diesel engines]. Moscow, MashGIZ Publ., 1952. 276 p. (In Russ.).
[13] Marchenko V.S., Sergeev A.A., Ivanchenko V.T. et al. Elektrooborudovanie teplovozov [Electrical equipment of diesel locomotives]. Moscow, Akademkniga Publ., 2003. 248 p. (In Russ.).
[14] Sistema elektronnogo upravleniya podachey topliva. ESUVT.01. Rukovodstvo po ekspluatatsii [Electronic fuel feeding control system. ESUVT.01. Operating manual]. Saratov, RZhD Publ., 2012. 82 p. (In Russ.).
[15] USB–4716. Multifunction USB module. advantech.ru: website. URL: https://www.advantech.ru/products/1-2mlkno/usb-4716/mod_a3ab933c-c6d3-49eb-9d25-58cacecdef7a (accessed: 09.08.2022).