Shut-Off Valve Throughput Capacity

The article proposes a method for determining the throughput capacity of shut-off valves of various types (ball valve, straight-through and direct-flow valves) by numerical simulation based on computational fluid dynamics. A comparative analysis of the throughput capacity values of ball, straight-through and direct-flow valves calculated by this method was performed. The results of calculation and experiment are compared. The disadvantages and advantages of shut-off valves are indicated, recommendations for their use are given. It was established that when the shutter is fully opened, the absolute discrepancy between the calculated and experimental data is 0 ... 27 %. The analysis of the obtained results confirmed the possibility of using the proposed method for calculating the throughput capacity of shut-off valves of the specified type.

References

[1] Nguyen Q.K., Jung K.H., Lee G.N. et al. Experimental study on pressure distribution and flow coefficient of globe valve. Processes, 2020, vol. 8, no. 7, art. 875, doi: https://doi.org/10.3390/pr8070875

[2] GOST 34437–2018. Armatura truboprovodnaya. Metodika eksperimental’nogo opredeleniya gidravlicheskikh i kavitatsionnykh kharakteristik [State standard 34437-2018. Pipeline valves. Technique of the experimental determination of hydraulic and cavitation characteristics]. Moscow, Standartinform Publ., 2018. 41 p. (In Russ.).

[3] Gaynulin A.E., Pugachuk A.S., Chernyshev A.V. Determination of gas flow characteristics in regulating spherical valves for different stet rotation angles. Truboprovodnaya armatura i oborudovanie, 2021, no. 3, pp. 52–53. (In Russ.).

[4] Zhang J.B., Cheng D., Fu B.S. et al. Experimental research on the water spray hole flow coefficient. J. Phys.: Conf. Ser., 2021, vol. 1965, art. 012026, doi: https://doi.org/10.1088/1742-6596/1965/1/012026

[5] Wu D., Li S., Wu P. CFD simulation of flow-pressure characteristics of a pressure control valve for automotive fuel supply system. Energy Convers. Manag., 2015, vol. 101, pp. 658–665, doi: https://doi.org/10.1016/j.enconman.2015.06.025

[6] David A. Venditti, David L. Darmofal. A grid adaptive methodology for functional outputs of compressible flow simulations. 15th AIAA Computational Fluid Dynamics Conference, 2001, doi: https://doi.org/10.2514/6.2001-2659

[7] Solov’yeva V.V., Pugachuk A.S., Chernyshev A.V. Modeling of working medium flow in disk valves. Truboprovodnaya armatura i oborudovanie, 2021, no. 5, pp. 42–43. (In Russ.).

[8] Wan Hanif Hazwan Wan Suhaimi, Rosidah Sam, Juliana Johari, Norlida Buniyamin, Design and analysis of a gate valve fluid flow using SolidWorks simulation software, Electrical Electronics and System Engineering, 2014 International Conference, pp. 71–76, 2014, doi: https://doi.org/10.1109/ICEESE.2014.7154597

[9] J H Ri, Ripeanu R.G., Dinita A. Erosion Modeling of Coated Gate Valves, Tribology in Industry, 2021, doi: https://doi.org/ 10.24874/ti.1145.06.21.09

[10] V-ball valve Vanne V-Ball. Regulation & isolation valves. URL: http://www.meca-inox.com/wp-content/themes/glissando/downloads/05-V-Ball_FR_GB_2016.pdf (accessed: 26.01.2022).

[11] CG-500 catalog. Cryogenic & industrial gas equipment. URL: https://mvif.ru/assets/pdf/rego/CG-500%202019.pdf (accessed: 26.01.2022).

[12] Type 2000 pneumatically operated 2/2 way angle seat valve CLASSIC. burkert.com: website. URL: https://www.burkert.com/en/type/2000 (accessed: 26.01.2022).

[13] Nguyen Q.K., Jung K.H., Lee G.N. et al. Experimental study on pressure distribution and flow coefficient of globe valve. Processes, 2020, vol. 8, no. 7, art. 875, doi: https://doi.org/10.3390/pr8070875

[14] GOST 34437–2018. Armatura truboprovodnaya. Metodika eksperimental’nogo opredeleniya gidravlicheskikh i kavitatsionnykh kharakteristik [State standard 34437-2018. Pipeline valves. Technique of the experimental determination of hydraulic and cavitation characteristics]. Moscow, Standartinform Publ., 2018. 41 p. (In Russ.).

[15] Gaynulin A.E., Pugachuk A.S., Chernyshev A.V. Determination of gas flow characteristics in regulating spherical valves for different stet rotation angles. Truboprovodnaya armatura i oborudovanie, 2021, no. 3, pp. 52–53. (In Russ.).

[16] Zhang J.B., Cheng D., Fu B.S. et al. Experimental research on the water spray hole flow coefficient. J. Phys.: Conf. Ser., 2021, vol. 1965, art. 012026, doi: https://doi.org/10.1088/1742-6596/1965/1/012026

[17] Wu D., Li S., Wu P. CFD simulation of flow-pressure characteristics of a pressure control valve for automotive fuel supply system. Energy Convers. Manag., 2015, vol. 101, pp. 658–665, doi: https://doi.org/10.1016/j.enconman.2015.06.025

[18] David A. Venditti, David L. Darmofal. A grid adaptive methodology for functional outputs of compressible flow simulations. 15th AIAA Computational Fluid Dynamics Conference, 2001, doi: https://doi.org/10.2514/6.2001-2659

[19] Solov’yeva V.V., Pugachuk A.S., Chernyshev A.V. Modeling of working medium flow in disk valves. Truboprovodnaya armatura i oborudovanie, 2021, no. 5, pp. 42–43. (In Russ.).

[20] Wan Hanif Hazwan Wan Suhaimi, Rosidah Sam, Juliana Johari, Norlida Buniyamin, Design and analysis of a gate valve fluid flow using SolidWorks simulation software, Electrical Electronics and System Engineering, 2014 International Conference, pp. 71–76, 2014, doi: https://doi.org/10.1109/ICEESE.2014.7154597

[21] J H Ri, Ripeanu R.G., Dinita A. Erosion Modeling of Coated Gate Valves, Tribology in Industry, 2021, doi: https://doi.org/ 10.24874/ti.1145.06.21.09

[22] V-ball valve Vanne V-Ball. Regulation & isolation valves. URL: http://www.meca-inox.com/wp-content/themes/glissando/downloads/05-V-Ball_FR_GB_2016.pdf (accessed: 26.01.2022).

[23] CG-500 catalog. Cryogenic & industrial gas equipment. URL: https://mvif.ru/assets/pdf/rego/CG-500%202019.pdf (accessed: 26.01.2022).

[24] Type 2000 pneumatically operated 2/2 way angle seat valve CLASSIC. burkert.com: website. URL: https://www.burkert.com/en/type/2000 (accessed: 26.01.2022).