Search

Catalog

Main Journal ArchiveYear 2022 / № 3

Issue: #3 (744)

DOI 10.18698/0536-1044-2022-3

Mechanical Engineering and Machine Science

Methods of Manipulators Controlling Based on a Tripod When Performing Technological Operations

Authors: Vorobyeva N.S.
Category: Mechanical Engineering and Machine Science \| Chapter: Robots, Mechatronics and Robotic Systems
Keywords: manipulators based on a tripod, parallel- serial structure, controlled capture, control methods

The Properties of Attracting Sets of Tool Deformation Displacements in the Trajectories of the Shape-Generating Movements in Turning

Authors: Zakovorotny V.L., Gvindzhiliya V.E.
Category: Mechanical Engineering and Machine Science \| Chapter: Technology and Equipment for Mechanical and Physico-Technical Processing
Keywords: dynamic cutting system, attracting sets of strain displacements, trajectories of the shape generating movements

Power, Metallurgic and Chemical Engineering

Computational Analysis of the Dynamic Qualities of a Diesel Engine and a Tracked Vehicle

Authors: Markov V.A., Barchenko F.B., Neverov V.A., Savastenko A.A., Lotfullin Sh.R.
Category: Power, Metallurgic and Chemical Engineering \| Chapter: Heat Engines
Keywords: diesel engine, four-stroke cycle, two-stroke cycle, external speed characteristic, dynamic engine qualities, tracked vehicle acceleration

Starting the diesel engine 1H9.5/8.0 by forced preheated air charge supply

Authors: Pavlov D.V.
Category: Power, Metallurgic and Chemical Engineering \| Chapter: Heat Engines
Keywords: diesel engine start, low temperatures, forced supply, intake air, starting frequency

Determining the Axial Force in the Calculation of Axial Vibrations of the Piston Engine Crankshaft

Authors: Yamanin A.I.
Category: Power, Metallurgic and Chemical Engineering \| Chapter: Heat Engines
Keywords: crankshaft, axial vibrations, longitudinal compliance, disturbing force

Shut-Off Valve Throughput Capacity

Authors: Malov D.A., Chernyshev A.V., Slobodov E.B.
Category: Power, Metallurgic and Chemical Engineering \| Chapter: Vacuum and Compressor Technology and Pneumatic Systems
Keywords: throughput capacity, shut-off valves, straight-through and direct-flow valves, numerical simulation, approach to calculation and design

Selecting the Centrifugal Compressor Impeller Blade Height During Preliminary Designing

Authors: Solovyeva O.A., Galerkin Y.B., Drozdov A.A., Soldatova K.V., Rekstin A.F., Brodnev P.N.
Category: Power, Metallurgic and Chemical Engineering \| Chapter: Vacuum and Compressor Technology and Pneumatic Systems
Keywords: centrifugal compressor, impeller, mathematical model, loss coefficient, velocity diagram, preliminary designing

Study of Vibrational and Mechanical Properties of Pre-Tensioned Banded Stator Blades of an Axial Compressor

Authors: Sedunin V.A., Marchenko Yu.G., Melikhov I.V., Kalinin I.A., Antropov D.V.
Category: Power, Metallurgic and Chemical Engineering \| Chapter: Turbomachines and Combination Turbine Plants
Keywords: axial compressor, strength calculation, natural vibration frequencies, resonance, pre-tension, stator blades

Development of a Technique for Filling Pneumatic Automation Device Chambers During Pneumatic Vacuum Tests

Authors: Aliev A.R.
Category: Power, Metallurgic and Chemical Engineering \| Chapter: Hydraulic Machines and Hydropneumatic Units
Keywords: gas filling technique, pneumatic vacuum tests, leak tests, filling the chamber with gas, automation of the process

Aviation, Rocket and Technology

Analysis of the Main Methods of Obtaining Propellant by Electrolysis of Water

Authors: Shalashov M.A., Peshkov R.A.
Category: Aviation, Rocket and Technology \| Chapter: Aircraft Development, Design and Manufacture
Keywords: oxygen-hydrogen propulsion system, onboard electrolysis unit, small spacecraft