Assessment of the 10HSND steel plastic deformation using elastic waves

Special operation conditions of the transport and installation equipment of missile systems and their mechanisms (high labor intensity, uniqueness, high reliability and synchronization) stipulate the importance of monitoring current state of the 10HSND metal used in construction of the launch equipment and systems. The material plastic deformation causes alterations in its internal structure and properties that could be detected and analyzed using the acoustic probing. This method makes it possible to determine the presence and degree of plastic deformations in the equipment components, as well as to assess intensity and direction of these deformations. The paper proposes an acoustic indicator identifying the limit state, which is making the obtained results of practical significance.
EDN: OXNMGP, https://elibrary/oxnmgp

References

[1] Transportno-ustanovochnyy agregat (TUA). Programma i metodika avtonomnykh ispytaniy 373UN34 0000.000 PM-1 [Transport and installation unit (TUA). Programme and methodology of autonomous tests 373UN34 0000.000 PM-1]. AO «Korporatsiya «SPU–TsKB TM». (In Russ.).

[2] Solovyev V.V., Rodyushkin V.M., Ilyakhinskiy A.V. et al. Monitoring of the limit state due to plastic deformations in 10XSND steel. Dvoynye tekhnologii, 2022, no. 2, pp. 37–42. (In Russ.).

[3] Mitenkov F.M., ed. Akusticheskiy kontrol oborudovaniya pri izgotovlenii i ekspluatatsii [Acoustic control of equipment during manufacture and operation]. Moscow, Nauka Publ., 2009. 279 p. (In Russ.).

[4] Ermolov I.N., Lange Yu.V. Ultrazvukovoy kontrol. T. 3. Nerazrushayushchiy control [Ultrasonic control. Vol. 3. Nondestructive testing]. Moscow, Mashinostroenie Publ., 2004. 864 p. (In Russ.).

[5] Prawin J., Rama Mohan Rao A. Vibration-based breathing crack identification using non-linear intermodulation components under noisy environment. Struct. Health Monit., 2019, vol. 19, no. 1, pp. 86–104, doi: https://doi.org/10.1177/1475921719836953

[6] Britenkov A.K., Rodyushkin V.M., Ilyakhinskiy A.V. Acoustic sensing study of the physical and mechanical properties of titanium alloy Ti-6Al-4V, made by selective laser melting. Fizika i mekhanika materialov [Materials Physics and Mechanics], 2021, vol. 47, no. 1, pp. 139–158. (In Russ.).

[7] Gonchar A.V., Mishakin V.V., Klyushnikov V.A. The effect of phase transformations induced by cyclic loading on the elastic properties and plastic hysteresis of austenitic stainless steel. Int. J. Fatigue, 2018, vol. 106, pp. 153–158, doi: https://doi.org/10.1016/j.ijfatigue.2017.10.003

[8] Yamagishi H., Fukuhara M. Degradation behavior of moduli in extruded pure magnesium during low — to giga-scale cyclic tension fatigue. Acta Materialia, 2012, vol. 60, no. 12, pp. 4759–4767, doi: https://doi.org/10.1016/j.actamat.2012.05.027

[9] Erofeev V.I., Ilyahinsky A.V., Nikitina E.A. et al. Study of the defective structure of metal by the method of ultrasonic sounding. J. Mach. Manuf. Reliab., 2019, vol. 48, no. 1, pp. 93–97, doi: https://doi.org/10.3103/S1052618819010060

[10] Rodyushkin V.M., Ilyakhinskiy A.V. On the result of measuring the propagation time of an elastic wave in a deformable steel sample of grade 10XCND. Privolzhskiy nauchnyy zhurnal [Privolzhsky Scientific Journal], 2023, no. 3, pp. 22–28. (In Russ.).

[11] Zuev L.B., Muravyev V.V., Danilova Yu.S. Criterion for fatigue failure in steels. Pisma v ZhTF, 1999, vol. 25, no. 9, pp. 31–34. (In Russ.). (Eng. version: Tech. Phys. Lett., 1999, vol. 25, no. 5, art. 352, doi: https://doi.org/10.1134/1.1262478)

[12] Shermergor T.D. Teoriya uprugosti mikroneodnorodnykh sred [Theory of elasticity of microneogeneous media]. Moscow, Nauka Publ., 1977. 399 p. (In Russ.).

[13] Kurashkin K.V. The stress evaluation in the welded joints by the acoustic method. Kontrol. Diagnostika [Testing. Diagnostics], 2016, no. 10, pp. 52–56, doi: https://doi.org/10.14489/td.2016.10.pp.052-056 (in Russ.).

[14] Ilyakhinskiy A.V., Rodyushkin V.M. Experimental studies of the effect of steel damage on the patterns of surface waves propagation. Vestnik PNIPU. Mekhanika [PNRPU Mechanics Bulletin], 2018, no. 3, pp. 36–43, doi: https://doi.org/10.15593/perm.mech/2018.3.04 (in Russ.).

[15] Erofeev V.I., Ilyakhinskiy A.V., Nikitina E.A. et al. Ultrasonic sensing method for evaluating the limit state of metal structures associated with the onset of plastic deformation. Fizicheskaya mezomekhanika, 2019, vol. 22, no. 3, pp. 65–70, doi: https://doi.org/10.24411/1683-805X-2019-13007 (in Russ.). (Eng. version: Phys. Mesomech., 2020, vol. 23, no. 3, pp. 241–245, doi: https://doi.org/10.1134/S102995992003008X)

[16] Erofeev V.I., Ilyakhinsky A.V., Nikitina E.A. et al. Ultrasonic sensing method for evaluating the limit state of metal structures associated with the onset of plastic deformation. Phys. Mesomech., 2020, vol. 23, no. 3, pp. 241–245, doi: https://doi.org/10.1134/S102995992003008X

[17] Solovyev V.V., Rodyushkin V.M., Ilyakhinskiy A.V. et al. Simulation of acoustic waves for evaluation of the stress-strain state under plastic deformation. Dvoynye tekhnologii, 2023, no. 1, pp. 32–40. (In Russ.).

[18] Hall E.O. The deformation and ageing of mild steel: III discussion of results. Proc. Phys. Soc. B, 1951, vol. 64, no. 9, pp. 747–753, doi: https://doi.org/10.1088/0370-1301/64/9/303