Search
Issue: #11 (704)
Mechanical Engineering and Machine Science
An Analysis of Contact Interaction of the Cylinder Roller with the Bearing Races Using the Finite Element Method
| Authors: Sorokin F.D., Hao Zhang | |
Category: Mechanical Engineering and Machine Science | Chapter: Machine Science, Drive Systems, and Machine Components |
|
| Keywords: contact interaction, cylindrical bearing, finite element method, least square method | |
A Mechanism of Transition of Austenite to Martensite During Cold Plastic Deformation of Austenitic Steels
| Authors: Bubnov V.A. | |
Category: Mechanical Engineering and Machine Science | Chapter: Manufacturing Engineering |
|
| Keywords: austenitic steels, austenite, martensite, plastic deformation, degree of deformation, strain hardening | |
Structural Characteristics of Two-Phase Flows in Vertical Channels of Nuclear Power Plant Cooling Systems in the Natural Circulation Mode
The Development of a Flat Parallel Structure Mechanism with One Degree of Freedom for Excitation of Vibrations on Any Kinematic Screw
| Authors: Didenko E.V., Glazunov V.A., Filippov G.S. | |
Category: Mechanical Engineering and Machine Science | Chapter: Theory of Mechanisms and Machines |
|
| Keywords: parallel structure mechanism, vibration table, one degree of freedom, flat oscillatory motion, kinematic screw | |
Power, Metallurgic and Chemical Engineering
The Implementation of the BESO Method for Topology Optimization in ANSYS APDL and its Application for Optimization of the Connecting Rod Shape of a Locomotive Diesel Engine
| Authors: Myagkov L.L., Chirskii S.P. | |
Category: Power, Metallurgic and Chemical Engineering | Chapter: Heat Engines |
|
| Keywords: piston engine, fatigue strength, ANSYS APDL, topology optimization, evolutionary structural optimization, connecting rod shape | |
Modeling of Residual Stresses when Calculating Strength of Lock Joint Elements. Part 1. Modeling of the Shot Peening Process
| Authors: Kiselev I.A., Zhukov N.A., Vasilyev B.E., Selivanov A.N. | |
Category: Power, Metallurgic and Chemical Engineering | Chapter: Turbomachines and Combination Turbine Plants |
|
| Keywords: residual stresses, shot peening, finite element method, stress-strain state | |
A Calculation of Characteristics of Three-Piston Pumps
| Authors: Velikanov N.L., Naumov V.A. | |
Category: Power, Metallurgic and Chemical Engineering | Chapter: Hydraulic Machines and Hydropneumatic Units |
|
| Keywords: three-piston pump, hydraulic and energy characteristics, mains pressure, supplied power | |
Aviation, Rocket and Technology
A Solution to the Problem of Subsonic Flow Around an Airfoil by Two-Phase Viscous Compressible Flow Taking Account of Phase Interaction
| Authors: Bykov L.V., Indrulenayte Y.A., Pashkov O.A. | |
Category: Aviation, Rocket and Technology | Chapter: Aerodynamics and Heat Transfer Processes in Aircraft |
|
| Keywords: aircraft, airfoil, flow regime, icing of airfoil, computational model | |
An Investigation of a Model of a Coiled Heat Exchanger with Varying Geometry in a Wide Range of Reynolds Numbers
An Assessment of the Probability of Failure of Air-to-Air Heat Exchangers when Operating Air-Conditioning Systems