Search
Issue: #7 (772)
Mechanics
Method for determining the deep drawing limit coefficients taking into account the workpiece nonlinear plasticity and thickness alteration
| Authors: Feoktistov S.I., Andrianov I.K. | |
Category: Mechanics | Chapter: Solid Mechanics |
|
| Keywords: FLD diagram, nonlinear plasticity, deep drawing, axisymmetric shell, method of variable elastic parameters, limit deformations | |
Mechanical Engineering and Machine Science
Structural synthesis and analysis of the self-aligning mechanisms mobility based on the structural grоups for various branches of technology
| Authors: Pozhbelko V.I. | |
Category: Mechanical Engineering and Machine Science | Chapter: Machine Science |
|
| Keywords: structural synthesis, mobility analysis, redundant connections, lever multi-circuit mechanisms | |
Assessing the spindle dynamic quality
| Authors: Brungardt A.V., Shchepin A.N., Brungardt M.V., Bryukhovetskaya E.V. | |
Category: Mechanical Engineering and Machine Science | Chapter: Machine Science |
|
| Keywords: spindle assembly, dynamic model, natural frequency, moment of inertia | |
Design and development of an endoscopic gripper for tissue suturing in the laparoscopic operations
| Authors: Shalyukhin K.A., Levin S.V., Skvortsov S.A. | |
Category: Mechanical Engineering and Machine Science | Chapter: Robots, Mechatronics and Robotic Systems |
|
| Keywords: minimally invasive operations, laparoscopic instruments, staplers, surgical suture, ligature | |
Development of a method to compute wear indicators of the prefabricated carbide cutters
| Authors: Grubyi S.V. | |
Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment for Mechanical and Physico-Technical Processing |
|
| Keywords: method, computation, parameters, wear, durability, wear-resistant coating, polynomial equation, spline | |
Studying accuracy of the stepped shafts machining on the CNC lathe
| Authors: Amirov F.G., Abbasov V.A., Amirli S.F., Simon Silvio, Gadymov E.Z. | |
Category: Mechanical Engineering and Machine Science | Chapter: Manufacturing Engineering |
|
| Keywords: CNC machines, lathe, stepped shaft, cutting parameters, cutting force, dimensional deviation | |
Development of a promising technology for the embedded elements manufacture to obtain guide vanes for the turbopump units
| Authors: Ryazantsev A.Yu., Smolentsev E.V., Ustinov K.A., Ryazantseva E.A. | |
Category: Mechanical Engineering and Machine Science | Chapter: Manufacturing Engineering |
|
| Keywords: liquid propellant rocket engine, turbopump unit, guide vane, embedded element, technological equipment | |
Parametric analysis of the network elements influence in suction into a compressor on the nature of surge vibrations in the compressor-network system
Assessment of the boundary conditions influence on the design load capacity value of the turbocharger gas-dynamic radial foil bearings
A way to increase service life of the imported piston seals during the period of the sanctions’
Aviation, Rocket and Technology
Promising solid lubricant coatings for use in the normal atmosphere and vacuum
| Authors: Khopin P.N. | |
Category: Aviation, Rocket and Technology | Chapter: Aircraft Development, Design and Manufacture |
|
| Keywords: solid lubricant coatings, tribological characteristics, closed field method, unbalanced magnetron-ion sputtering, dry air, humid air | |