Search

Catalog

Main Journal ArchiveYear 2013 / № 7

Issue: #7 (640)

DOI 10.18698/0536-1044-2013-7

Calculation and Design of Machinery

A Manipulator of Parallel Structure for Translational Movement

Authors: Kozyrev A.V., Glazunov V.A.
Category: Calculation and Design of Machinery
Keywords: manipulator of parallel structure, Pluecker coordinates, inverse problem kinematic, active area

Mathematical Model and Computational Research of Combustion Chamber Wall Thermal State for Gaseous-Propellant Oxygen-Methane Low-Thrust Rocket Engine on a Pulse Mode

Authors: Voroxheeva O.A., Yagodnikov D.A.
Category: Calculation and Design of Machinery
Keywords: mathematical modeling, thermal state, low-thrust rocket engine, gaseous oxygen and methane, combust ion chamber, pulse mode

Modeling of Oscillations of Beam Structure Containing Two Rotors With Parallel Axes of Rotation

Authors: Arinchev S.V., Fedyushkin A.S.
Category: Calculation and Design of Machinery
Keywords: rotor, experimental model, beam structure, parallel axes of rotation, test gyroscopic model, resonance test, beam calculation model

Increasing the Efficiency of Machines by Changes in Acceleration-Deceleration Cycle

Authors: Leonov I.V.
Category: Calculation and Design of Machinery
Keywords: mathematical model, energy consumption, energy recuperation, acceleration-deceleration, increasing the efficiency, a point of change from acceleration to deceleration

Tool Life Model of Taps With Internal Placement of Chips (TIPC)

Authors: Dreval A.E., Litvinenko A.V.
Category: Calculation and Design of Machinery
Keywords: cutting tool, criteria, tool wear, tap, tool life

Transportation and Power Engineering

Dynamic Characteristics Comparison of Hydraulic Drives under Two Methods of Spool Valve Control

Authors: Salman M.A.
Category: Transportation and Power Engineering
Keywords: servo drive, spool valve, servo control, proportional control, transitional characteristics

A Proposal for End of Life Vehicles Recycling in Greece

Authors: Papadigiannis A.S., Chondros T.G., Dentsoras A.J.
Category: Transportation and Power Engineering
Keywords: End-of-Life Vehicles (ELVs), collection network, dismantling, recycling, multi-criteria decision algorithm

Fuel Supply system with electronically control of diesel locomotive engine

Authors: Markov V.A., Furman V.V., Akimov V.S.
Category: Transportation and Power Engineering
Keywords: diesel engine, fuel control system, metering valves

Technology and Process Machines

Developing Algorithm for Technological Processes Optimization

Authors: Sultan-Zadeh N.M., Amirov F.G.
Category: Technology and Process Machines
Keywords: automatic lines, technological process, processing step and working operations, single-cutter and single-side machines

Choosing the Kinematic Structure and Dynamics Study of Tree-like Robot Crab Actuator

Authors: Kovalchuk A.K.
Category: Technology and Process Machines
Keywords: walking robot, tree-like actuator, robot dynamics equation

Friction Transmissions of Low-Torque Motors

Authors: Gudkov V.V.
Category: Technology and Process Machines
Keywords: rotary motion, wave friction gear, ball-friction gear