Search
A Model of Cylindrical Gear Failures Using the Criterion of the Working Surface Wear Resistance
| Authors: Antsupov A.V., Antsupov A.V., Antsupov V.P., Slobodianskii M.G. | Published: 20.05.2019 |
| Published in issue: #5(710)/2019 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: gear, gear wear-out criterion, wear-out failure model, transmission lifetime prediction, service life of transmission elements, tribocoupling reliability |
An Analysis of Destructive Methods of Thin Films Thickness Measurement
| Authors: Shupenev A.E., Pankova N.S., Korshunov I.S., Grigoriyants A.G. | Published: 12.03.2019 |
| Published in issue: #3(708)/2019 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: thin films thickness, bevel cut method, spherical cut method, stylus profilometry, atomic-force microscopy |
A Parametric Study of Elastic Properties of Gasdynamic Foil Thrust Bearings Using a One-Dimensional Fluid Flow Model
| Authors: Temis M.Y., Meshcheryakov A.B. | Published: 19.02.2019 |
| Published in issue: #2(707)/2019 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: gasdynamic bearing, elastogasdynamic contact, Reynolds equation, self-correction step method, thrust bearing |
Selection of an Asynchronous Motor for the Belt Conveyor Drive with a Parallel-Shaft Gearbox
| Authors: Lustenkov M.E., Skaryno B.B., Lustenkova E.S. | Published: 19.02.2019 |
| Published in issue: #2(707)/2019 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: asynchronous motor, electromechanical conveyor drive, gear ratio, parallel-shaft gearbox, gear train |
Pressure Distribution in the Area Around a Tightened Single Bolt Joint
| Authors: Kuts M.S. | Published: 24.01.2019 |
| Published in issue: #1(706)/2019 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: contact pliability, interface finite element, single bolted joint, contact layer roughness |
An Analysis of Contact Interaction of the Cylinder Roller with the Bearing Races Using the Finite Element Method
| Authors: Sorokin F.D., Hao Zhang | Published: 03.12.2018 |
| Published in issue: #11(704)/2018 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: contact interaction, cylindrical bearing, finite element method, least square method |
Determining Deformations of Parts when Tightening Bolted Joints
| Authors: Ryahovskiy O.A., Syromyatnikov V.S. | Published: 25.10.2018 |
| Published in issue: #10(703)/2018 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: bolted connection, tightening force, deformation of joint elements, nut rotation angle, screwing torque, moment of force in thread |
On the Full Annular Rub in the Flexible Rotor — Compliant Stator System due to Friction
| Authors: Nikiforov A.N. | Published: 25.10.2018 |
| Published in issue: #10(703)/2018 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: rotor-stator system, contact rotor dynamics, backward precession, frequency and amplitude of vibration |
The Calculation and Selection of Bearings of Increased Reliability
| Authors: Syromyatnikov V.S., Garcia Martinez Juan Marcos, Samora Quintana Laura Angelica, Ortega Rosales Miguel Gersaun | Published: 08.10.2018 |
| Published in issue: #9(702)/2018 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: bearing service life, bearings reliability, dynamic load-carrying capacity, Weibull distribution, failure distribution function |
Electromechanical Actuator with a Planetary Roller-Screw Mechanism for the Electrochemical Machine with an Oscillating Tool Electrode
| Authors: Mamaev I.M., Filimonov V.N. | Published: 04.09.2018 |
| Published in issue: #8(701)/2018 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: electro-mechanical actuator, roller-screw mechanism, electrochemical machine tool, oscillating electrode tool, gas turbine engine blades, shaping accuracy |