Search

Catalog

Main Journal ArchiveYear 2016 / № 12

Issue: #12 (681)

DOI 10.18698/0536-1044-2016-12

Calculation and Design of Machinery

The Correlation Between the Accuracy of Hole Machining and the Accuracy of Angles of the Reamer Cutting Edge

Authors: Dreval A.E.
Category: Calculation and Design of Machinery
Keywords: reaming, machine reamer, cutting edge angle, tooth pitch angle, angle error, total error, hole widening

Modeling of Contact Interaction of a Thermoelastic Body System using Schwartz Method for a Multidimensional Case

Authors: Galanin M.P., Krupkin A.V., Kuznetsov V.I., Lukin V.V., Novikov V.V., Rodin A.S., Stankevich I.V.
Category: Calculation and Design of Machinery
Keywords: finite element method, contact problem, polycontact interaction, Schwartz method

The Kinematic Analysis of a Planetary Gear Mechanism for Converting Rotational Motion into Reciprocating Rotational Motion

Authors: Prikhodko A.A., Smelyagin A.I.
Category: Calculation and Design of Machinery
Keywords: planetary gear, kinematic analysis, conversion of motion, reciprocating rotational motion, elliptical gearwheels, angular velocity analogue, oscillation angle

The Evaluation of Vibration Load of High-Rise Structures on Swaying Platforms

Authors: Gusev A.S., Zinchenko L.V., Starodubtseva S.A.
Category: Calculation and Design of Machinery
Keywords: random process, strength reliability, probability characteristics, event probability, standard movement

The Application of the Method of Successive Loadings when Solving Problems of Mechanics of Flat Rods

Authors: Naumov A.M.
Category: Calculation and Design of Machinery
Keywords: associated basis, Cartesian basis, transformation matrix, state vector, method of successive loading, flat rod, nonlinear system of equations, linearized system of equations, step load

The Optimum Preload of a Threaded Joint Against Joint Separation

Authors: Syromyatnikov V.S., Garcia Martinez Juan Marcos, Samora Quintana Laura Angelica, Ortega Rosales Miguel Gersaun
Category: Calculation and Design of Machinery
Keywords: safety factor, equivalent stress, threaded joint, proof load, optimum preload

Technology and Process Machines

The Characteristics of the Platform for Active Vibration Isolation Based on Magnetorheological Elastomers

Authors: Mikhailov V.P., Tovmachenko D.K., Basinenkov A.M., Stepanov G.V.
Category: Technology and Process Machines
Keywords: magnetorheological elastomer, active damper, vibration isolation, positioning error, transitional process

Statistical Methods of Control of Technological Processes

Authors: Timofeev G.A., Barbashov N.N., Terentyeva A.D.
Category: Technology and Process Machines
Keywords: adaptive control, automation of technological processes, precision control, rational algorithm, moving average

The Assessment of Cutting Ability of Nitride-Boron High Porous Wheels when Flat Grinding Steel 13Kh15N5AM3 Parts by Surface Macrogeometry Using Artificial Intelligence

Authors: Soler Y.I., Nguen M.T., Mai D.S.
Category: Technology and Process Machines
Keywords: grinding, flatness deviation, fuzzy logic, high porous wheels, neural network, activation function

Instability of Cutting Depth when Grinding Gearwheel Teeth by Copying

Authors: Rasulov N.M., Shabiev E.T.
Category: Technology and Process Machines
Keywords: grinding, involute profile, cutting depth, abrasive wheel, copying method, allowance

The Influence of Structural, Technological Parameters and Strain State on Anisotropy of Mechanical Properties of Sheet Porous Net Materials

Authors: Tretyakov A.F.
Category: Technology and Process Machines
Keywords: anisotropy of mechanical properties, porous net materials, woven wire mesh, reduction rate of mesh briquette, biaxial tension, averaged macroscopic failure stress, relative mesh lengthening, hydrostatic bulging

Aviation and Rocket-Space Engineering

Controlled Turning of a Space Vehicle with Elastic Solar Panels

Authors: Russkikh S.V.
Category: Aviation and Rocket-Space Engineering
Keywords: space vehicle, controlled turning, vibration damping, control function, inverse problem of dynamics, roll turning

The Methods of Designing a Polymer Composite Wing Using Parametrical Modeling. Part II. Design of the Load Bearing Structure

Authors: Mikhailovskiy K.V., Baranovski S.V.
Category: Aviation and Rocket-Space Engineering
Keywords: wing, polymer composite materials, structural arrangement, passenger jet, stringer, rib, longeron