Search
Experimental and Theoretical Research of Adaptive Inertia-Capillary Device for Liquid Intake
| Authors: Ivanov M.Y., Kuranov E.G., Novikov A.E., Resh G.F. | Published: 25.10.2018 |
| Published in issue: #10(703)/2018 | |
| Category: Aviation, Rocket and Technology | Chapter: Aircraft Development, Design and Manufacture | |
| Keywords: lyophilic homogeneous liquid, liquid intake method, capillary phase separator (CPS), comprehensive compression, Galileo-Torricelli principle, natural and artificial gravity |
A Solution to the Problem of Subsonic Flow Around an Airfoil by Two-Phase Viscous Compressible Flow Taking Account of Phase Interaction
| Authors: Bykov L.V., Indrulenayte Y.A., Pashkov O.A. | Published: 03.12.2018 |
| Published in issue: #11(704)/2018 | |
| Category: Aviation, Rocket and Technology | Chapter: Aerodynamics and Heat Transfer Processes in Aircraft | |
| Keywords: aircraft, airfoil, flow regime, icing of airfoil, computational model |
An Investigation of a Model of a Coiled Heat Exchanger with Varying Geometry in a Wide Range of Reynolds Numbers
| Authors: Frantsuzov M.S., Lopukhov S.A., Koroleva A.P. | Published: 03.12.2018 |
| Published in issue: #11(704)/2018 | |
| Category: Aviation, Rocket and Technology | Chapter: Aerodynamics and Heat Transfer Processes in Aircraft | |
| Keywords: coiled heat exchanger, numerical simulation of heat transfer, stationary problem, thermal and hydraulic characteristics |
An Assessment of the Probability of Failure of Air-to-Air Heat Exchangers when Operating Air-Conditioning Systems
| Authors: Galimov A.R., Merkulov V.I., Tishchenko I.V. | Published: 03.12.2018 |
| Published in issue: #11(704)/2018 | |
| Category: Aviation, Rocket and Technology | Chapter: Aircraft Development, Design and Manufacture | |
| Keywords: cooling air, aircraft, air-to-air heat exchanger, probabilistic performance evalu-ation, air conditioning system, aviation technology |
Modeling the Heating of the Binder of Polymeric Composite Materials Using Microwave Radiation
| Authors: Prosuntsov P.V., Reznik S.V., Mikhailovskiy K.V., Belenkov E.S. | Published: 24.12.2018 |
| Published in issue: #12(705)/2018 | |
| Category: Aviation, Rocket and Technology | Chapter: Aircraft Development, Design and Manufacture | |
| Keywords: rocket and space technology, polymer composite material, binder curing, microwave radiation, representative volume element |
Verification of Models for Turbulent Heat Fluxes in the Flow over a Rectangular Rib on a Plate
| Authors: Afanasiev V.N., Kong Dehai, Egorov K.S. | Published: 24.01.2019 |
| Published in issue: #1(706)/2019 | |
| Category: Aviation, Rocket and Technology | Chapter: Aerodynamics and Heat Transfer Processes in Aircraft | |
| Keywords: numerical simulation, turbulent heat flux, two-equation model, explicit algebraic model, rectangular rib, temperature fluctuation |
Numerical Simulation of the Flow Around Missiles dur-ing Transonic and Supersonic Flights
| Authors: Bykov L.V., Pashkov O.A., Pravidlo M.N. | Published: 24.01.2019 |
| Published in issue: #1(706)/2019 | |
| Category: Aviation, Rocket and Technology | Chapter: Aerodynamics and Heat Transfer Processes in Aircraft | |
| Keywords: rockets, Navier-Stokes equations, aerodynamic characteristics, deflectable element of the rudder, numerical simulation, turbulence model |
Accounting for Icing in the Design Analysis of Polymer Composite Wings
| Authors: Mikhailovskiy K.V., Baranovski S.V. | Published: 12.03.2019 |
| Published in issue: #3(708)/2019 | |
| Category: Aviation, Rocket and Technology | Chapter: Aircraft Development, Design and Manufacture | |
| Keywords: wing surface, ice covering, aerodynamic characteristics, ice accretion, aircraft icing |
A Hydrodynamic Analysis of the Dead-End Lines of Hydraulic System Pressure Mains Taking into Account High-Frequency Pressure Pulsations
| Authors: Bobarika I.O., Molokova S.V. | Published: 15.04.2019 |
| Published in issue: #4(709)/2019 | |
| Category: Aviation, Rocket and Technology | Chapter: Aircraft Development, Design and Manufacture | |
| Keywords: frequency response, hydraulic ripple, low-frequency resonance of the pipeline, hydraulic pump, dead-end line |
Topology Optimization of the Turbine Disk Structure under Thermomechanical Loads
| Authors: Bui V.P., Prokopov V.S., Gavryushin S.S., Papazafeiropoulos G. | Published: 15.04.2019 |
| Published in issue: #4(709)/2019 | |
| Category: Aviation, Rocket and Technology | Chapter: Aircraft Strength and Thermal Modes | |
| Keywords: topology optimization, MMA algorithm, minimization of compliance, axisymmetric structure, additive manufacturing |