Search
Fatigue Analysis of Bearings in Planetary Gearboxes of Turbofan Engines Taking into Account Dynamic Loading
| Authors: Kalinin D.V., Petrov N.I., Lavrentyev Y.L. | Published: 05.03.2020 |
| Published in issue: #3(720)/2020 | |
| Category: Aviation, Rocket and Technology | Chapter: Aircraft Strength and Thermal Modes | |
| Keywords: satellite support bearings, planetary gearbox, dynamic model, fatigue life of bearings |
An Experimental Study to Determine Mechanical and Thermophysical Characteristics of Thin-Walled Carbon Plastic Antenna Reflectors
| Authors: Novikov A.D., Reznik S.V., Denisov O.V. | Published: 05.03.2020 |
| Published in issue: #3(720)/2020 | |
| Category: Aviation, Rocket and Technology | Chapter: Aircraft Strength and Thermal Modes | |
| Keywords: reflectors of space antennas, carbon fiber, experiment, elastic modulus, thermal conductivity |
A Two-Mass Gyro-Particle as a Tool for Supersonic Aeroelasticity Analysis
| Authors: Arinchev S.V. | Published: 13.05.2020 |
| Published in issue: #5(722)/2020 | |
| Category: Aviation, Rocket and Technology | Chapter: Aircraft Strength and Thermal Modes | |
| Keywords: supersonic aeroelasticity, gas gyro-particle, multiple-frequency splitting |
A Calculation Procedure for Strength Analysis of Wave Guides for Ensuring Improved Mass-Dimensional Parameters
| Authors: Kudryavtsev I.V., Mikhnev M.M., Silchenko P.N. | Published: 27.05.2020 |
| Published in issue: #5(722)/2020 | |
| Category: Aviation, Rocket and Technology | Chapter: Aircraft Development, Design and Manufacture | |
| Keywords: spacecraft, non-axisymmetric cross section, wave guide strength, stiffness of wave guide sections, radio engineering characteristics, mass-dimensional parameters |
Newton’s Third Law is not a Dogma but a Computational Hypothesis
| Authors: Arinchev S.V. | Published: 27.06.2020 |
| Published in issue: #6(723)/2020 | |
| Category: Aviation, Rocket and Technology | Chapter: Aircraft Development, Design and Manufacture | |
| Keywords: experimental modal analysis, elastic linkages, Newton’s third law, particle approach |
Approximate Methodology for Design Ballistic Calculations of the First Stage of Launch Vehicles
| Authors: Mukhamedov L.P., Kirievskii D.A. | Published: 27.06.2020 |
| Published in issue: #6(723)/2020 | |
| Category: Aviation, Rocket and Technology | Chapter: Aircraft Development, Design and Manufacture | |
| Keywords: design ballistic calculation methods, design ballistics tasks, design and ballistic parameters, launch vehicle, launch vehicle flight characteristics, characteristic speed losses |
Theoretical Justification and Analysis of Technology for Manufacturing Waveguide-and-Distribution Systems of Spacecraft Communication Devices
| Authors: Mikhnev M.M., Kudryavtsev I.V., Silchenko P.N. | Published: 02.07.2020 |
| Published in issue: #6(723)/2020 | |
| Category: Aviation, Rocket and Technology | Chapter: Aircraft Development, Design and Manufacture | |
| Keywords: spacecraft, waveguide-and-distribution system, technological methods of soldering, rigidity and accuracy parameters, soldering seam strength, mounting points |
The Main Trends in Developing Highly Reliable Communication and Control Systems for Unmanned Aerial Vehicles
| Authors: Panteleymonov I.N., Belozertsev A.V., Monastyrenko А.А., Botsva V.V., Naumkin A.V. | Published: 02.07.2020 |
| Published in issue: #6(723)/2020 | |
| Category: Aviation, Rocket and Technology | Chapter: Aircraft Development, Design and Manufacture | |
| Keywords: communication and control systems, UAV, satellite-repeater, air repeater, ground repeater, communication line, onboard radio complex, antenna system |
An Evaluation of Performance Characteristics of Short-Fiber Basalt Insulation at Cryogenic Temperatures
| Authors: Komkov M.A., Timofeev M.P., Larionova A.V. | Published: 01.08.2020 |
| Published in issue: #7(724)/2020 | |
| Category: Aviation, Rocket and Technology | Chapter: Aircraft Development, Design and Manufacture | |
| Keywords: cryogenic temperature, high-porosity thermal insulation, short basalt fibers, filtrational settling, compression strength |
An Installation for Electrothermal Effects on a Workpiece
| Authors: Mariin S.B., Getopanov A.Y., Phyo W.A., Grigoriev V.V. | Published: 01.08.2020 |
| Published in issue: #7(724)/2020 | |
| Category: Aviation, Rocket and Technology | Chapter: Aircraft Development, Design and Manufacture | |
| Keywords: three-phase installation, electrothermal effect, titanium alloys, thyristor key |