Search
Launch Vehicle Rendezvous with Cataloged Space Objects During Insertion into Orbits with Low Inclination
Authors: Golubek A.V. | Published: 21.02.2018 |
Published in issue: #2(695)/2018 | |
Category: Aviation, Rocket and Technology | |
Keywords: launch vehicle, cataloged space objects, mutual motion, dangerous rendezvous |
Models for Managing the Development of Distributed Technical Systems
Authors: Gorelov B.А., Davydov A.D., Silaev A.V., Tikhonov A.V. | Published: 02.04.2018 |
Published in issue: #3(696)/2018 | |
Category: Aviation, Rocket and Technology | |
Keywords: economical and mathematical models, distributed technical systems, technical and economic efficiency |
Modeling Heat Strength Characteristics of Structural Elements of a Solid Propellant Rocket Engine Manufactured Using Prototyping
Authors: Ushakova E.S., Arefyev K.Yu., Polyanskiy A.R. | Published: 28.04.2018 |
Published in issue: #4(697)/2018 | |
Category: Aviation, Rocket and Technology | |
Keywords: powder prototyping technology, safety factor, temperature conditions of the structure, convective heat transfer, nozzle block |
On the Problem of Optimizing the Orbital Formation of Multi-Tiered Satellite Constellations for Continuous Near-Earth Space Coverage
Authors: Razumnyi Y.N., Samusenko O.E., Nguyen Nam Quy | Published: 28.04.2018 |
Published in issue: #4(697)/2018 | |
Category: Aviation, Rocket and Technology | |
Keywords: satellite constellation; continuous coverage; near-Earth space coverage; kinematically regular mono-structures |
Deploying a Planar Elastic Rod System with Cable Elements Attached to a Spacecraft
Authors: Russkikh S.V. | Published: 28.04.2018 |
Published in issue: #4(697)/2018 | |
Category: Aviation, Rocket and Technology | |
Keywords: elastic systems dynamics, spacecraft, mobile coordinate system, elastic-viscous nodal hinges, tensile cable, rod system deployment |
Simulation of the Separation of a Manned Spacecraft from Large Orbital Space Stations
Authors: Anfalov A.S., Bogomolov N.V., Borzykh S.V. | Published: 31.05.2018 |
Published in issue: #5(698)/2018 | |
Category: Aviation, Rocket and Technology | Chapter: Aerodynamics and Heat Transfer Processes in Aircraft | |
Keywords: separation process, manned spacecraft, orbital station, off-nominal situation, emergency situation, relative motion |
Evaluation of the Applicability of Different Equations of State of the Real Gas for Ethylene
Authors: Kukshinov N.V., Mamyshev D.L. | Published: 31.05.2018 |
Published in issue: #5(698)/2018 | |
Category: Aviation, Rocket and Technology | Chapter: Aerodynamics and Heat Transfer Processes in Aircraft | |
Keywords: equations of state, thermophysical properties of ethylene, real gas, supercritical area |
The Methods of Designing a Polymer Composite Wing Using Parametrical Modeling. Part III. Selection and Justification of Optimal Schemes for Reinforcing Load Bearing Elements
Authors: Mikhailovskiy K.V., Baranovski S.V. | Published: 31.05.2018 |
Published in issue: #5(698)/2018 | |
Category: Aviation, Rocket and Technology | Chapter: Aircraft Development, Design and Manufacture | |
Keywords: airliner, wing, structural arrangement, carbon fibre, reinforcement pattern |
An Experimental Study of Three-Dimensional Supersonic Flow Around an Axisymmetric Body with an Annular Ledge on the Surface
Authors: Simonenko M.M., Zubkov A.F. | Published: 05.06.2018 |
Published in issue: #5(698)/2018 | |
Category: Aviation, Rocket and Technology | Chapter: Aerodynamics and Heat Transfer Processes in Aircraft | |
Keywords: rectangular annular step, supersonic flow, angle of attack, flow separation, transverse separation |
Stoichiometric Gas Turbine Engines
Authors: Pismennyi V.L. | Published: 26.06.2018 |
Published in issue: #6(699)/2018 | |
Category: Aviation, Rocket and Technology | Chapter: Aerodynamics and Heat Transfer Processes in Aircraft | |
Keywords: gas turbine engines, heat exchanger, stoichiometric GTE, supersonic speed, hypersonic speed, combustion chamber |