Search
On the stability of mechanical systems functioning under random parametric excitations
| Authors: Gusev A.S., Naydenov S.O. | Published: 16.09.2013 |
| Published in issue: #3(624)/2012 | |
| Category: Calculation and Design of Machinery | |
| Keywords: probabilistic characteristics, parametric excitations, unsteady |
Power consumption analysis of the delivery vehicles cycle
| Authors: Leonov I.V. | Published: 16.09.2013 |
| Published in issue: #3(624)/2012 | |
| Category: Calculation and Design of Machinery | |
| Keywords: delivery vehicles, power consumption, braking, energy recuperation recovery, mathematical model, acceleration time, efficiency improvement, optimum power |
Modeling characteristics of turbine compressor with variable geometry turbine
| Authors: Kuznetsov A.G., Bokovikov A.N. | Published: 16.09.2013 |
| Published in issue: #3(624)/2012 | |
| Category: Calculation and Design of Machinery | |
| Keywords: turbine, compressor, modeling, flow rate, efficiency |
Dynamics of electromechanical servo drive with wave gear
| Authors: Kuzenkov V.V., Timofeev G.A. | Published: 16.09.2013 |
| Published in issue: #3(624)/2012 | |
| Category: Calculation and Design of Machinery | |
| Keywords: electromechanical actuator, wave gear, brushed motor, wave generator |
Nonlinear vibrations of inertial continuously variable transmissions without free-wheel clutch mechanisms
| Authors: Alyukov S.V. | Published: 16.09.2013 |
| Published in issue: #3(624)/2012 | |
| Category: Calculation and Design of Machinery | |
| Keywords: inertial continuously variable transmissions, pulse mechanism, mathematical models, nonlinear vibrations, stability, phase space |
Simulation of Fluoroplastic F-4 Strong Compression Process by Method of Particles with MSC.Adams
| Authors: Arinchev S.V. | Published: 19.09.2013 |
| Published in issue: #5(638)/2013 | |
| Category: Calculation and Design of Machinery | |
| Keywords: fluoroplastic, laboratory machine, experimental model, experimental bar-compression curve, computational model, macromolecule force characteristic, dynamic equations for bar-compression, integration accuracy |
A Rod Carrying Concentrated Masses in the Air or Liquid Flow: Statics, Vibrations, Natural Frequencies and Modes
| Authors: Naumov A.M. | Published: 19.09.2013 |
| Published in issue: #5(638)/2013 | |
| Category: Calculation and Design of Machinery | |
| Keywords: 3-D curved rod (spatially curved rod), statics, aerodynamic forces, liquid flow, flow rate, dynamics, small oscillations, natural frequencies, eigenvectors, associated basis, Cartesian basis, transformation matrix, concentrated masses, preloaded rod |
Geometry of Cylindrical Self-locking Gears with Circular-arc Tooth Profiles
| Authors: Timofeev G.A., Panyukhin V.V., Samoilova M.V. | Published: 19.09.2013 |
| Published in issue: #5(638)/2013 | |
| Category: Calculation and Design of Machinery | |
| Keywords: cylindrical self-locking gears, gearing geometry, circular and involute tooth profiles |
A New Method of Housing Flanges Sealing under High Internal Pressure
| Authors: Ryahovskiy O.A., Malysheva G.V., Vorobiev A.N. | Published: 19.09.2013 |
| Published in issue: #5(638)/2013 | |
| Category: Calculation and Design of Machinery | |
| Keywords: pump housing, flange butt joint, anaerobic material, stiffness butt joint |
Reliability Assessment of Shafts in Accordance with the Criteria of Fatigue Strength under Random Load Conditions
| Authors: Syzrantseva K.V., Chernaya L.A. | Published: 19.09.2013 |
| Published in issue: #5(638)/2013 | |
| Category: Calculation and Design of Machinery | |
| Keywords: shafts, fatigue strength, random load conditions, probability of failure operation, nonparametrical statistics methods |