Search
Buckling of an anisotropic round billet subject to external overpressure
| Authors: Yakovlev S.S., Remnev K.S. | Published: 01.08.2014 |
| Published in issue: #8(653)/2014 | |
| Category: Calculation and Design of Machinery | |
| Keywords: anisotropic material, corrugation, swaging, conical die, energy method, stability, round billet |
Overtightened and undertightened bolt joints
| Authors: Syromyatnikov V.S., Garcia Martinez Juan Marcos, Samora Quintana Laura Angelica, Ortega Rosales Miguel Gersaun | Published: 01.08.2014 |
| Published in issue: #8(653)/2014 | |
| Category: Calculation and Design of Machinery | |
| Keywords: bolt joint, correct tightening, tightening error, probability, safety factor, overtightening, undertightening |
Technological principles of reducing the cycle time and improving the manufacturing safety of the thermal protection system for spacecraft reentry
| Authors: Tarasov V.A., Romanenkov V.A., Komkov M.A. | Published: 01.08.2014 |
| Published in issue: #8(653)/2014 | |
| Category: Calculation and Design of Machinery | |
| Keywords: reentry spacecraft, thermal protection system, woven filler, phenolformaldehyde binder, porous material impregnation time, modification of a binder by carbon nanotubes, complex autoclave |
Calculation of the generating lines of working surfaces of conical screw compressors
| Authors: Aymetdinov B.I., Syzrantsev V.N., Chernaya L.A. | Published: 01.08.2014 |
| Published in issue: #8(653)/2014 | |
| Category: Calculation and Design of Machinery | |
| Keywords: conjugate generating lines, base cone, generating cone, gerotor device, conical screw actuating elements |
Noname
| Authors: Krysko V.A., Kuznetsova E.S., Savelyeva N.E. | Published: 28.08.2014 |
| Published in issue: #1(568)/2006 | |
| Category: Calculation and Design of Machinery | |
| Keywords: |
Noname
| Authors: Minaeva N.V. | Published: 28.08.2014 |
| Published in issue: #1(568)/2006 | |
| Category: Calculation and Design of Machinery | |
| Keywords: |
Noname
| Authors: Solomin O.V. | Published: 28.08.2014 |
| Published in issue: #1(568)/2006 | |
| Category: Calculation and Design of Machinery | |
| Keywords: |
Noname
| Authors: Solomin O.V., Salin M.I. | Published: 28.08.2014 |
| Published in issue: #1(568)/2006 | |
| Category: Calculation and Design of Machinery | |
| Keywords: |
Noname
| Authors: Zyablikov V.M., Smirnov V.F. | Published: 28.08.2014 |
| Published in issue: #1(568)/2006 | |
| Category: Calculation and Design of Machinery | |
| Keywords: |
Noname
| Authors: Radchenko V.P., Popov N.N. | Published: 28.08.2014 |
| Published in issue: #2(569)/2006 | |
| Category: Calculation and Design of Machinery | |
| Keywords: |