Search
Tool Life Model of Taps With Internal Placement of Chips (TIPC)
| Authors: Dreval A.E., Litvinenko A.V. | Published: 19.09.2013 |
| Published in issue: #7(640)/2013 | |
| Category: Calculation and Design of Machinery | |
| Keywords: cutting tool, tap, tool wear, criteria, tool life |
The numerical calculation of the flow in a diesel fuel injector
| Authors: Grishin Yu.A., Ryss K.N. | Published: 19.09.2013 |
| Published in issue: #8(641)/2013 | |
| Category: Calculation and Design of Machinery | |
| Keywords: computational fluid dynamics, finite volume method, injector, diffuser, velocity and pressure fields |
The impact of periodic disturbances on the formation of high-speed rod elements
| Authors: Asmolovskiy N.A., Baskakov V.D., Tarasov V.A. | Published: 19.09.2013 |
| Published in issue: #8(641)/2013 | |
| Category: Calculation and Design of Machinery | |
| Keywords: rod element, periodic folds, grid distortion |
The use of Cauchy-Krylov functions for the calculation of stresses and strains in plates and shells
| Authors: Vinogradov Yu.I. | Published: 19.09.2013 |
| Published in issue: #8(641)/2013 | |
| Category: Calculation and Design of Machinery | |
| Keywords: strength, strength, plate, shell, differential equations, Cauchy-Krylov functions, boundary value problem |
The influence of inaccuracies of laying tracks on the loads acting on bridge cranes
| Authors: Spitcina D.N., Yurin A.N. | Published: 19.09.2013 |
| Published in issue: #8(641)/2013 | |
| Category: Calculation and Design of Machinery | |
| Keywords: lateral forces, wheels axle, gap between a flange and a rail, dynamic model, direction and magnitude of angular misalignment of axles, rail track |
Kinematic error and backlash in wave gears with external deformation
| Authors: Kostikov Y.V., Timofeev G.A., Fursyak F.I. | Published: 19.09.2013 |
| Published in issue: #8(641)/2013 | |
| Category: Calculation and Design of Machinery | |
| Keywords: wave gear, external deformation wave generator, flexible and rigid gears, kinematic precision, backlash accuracy |
Determining the safety factor for fatigue strength under regular loading
| Authors: Shirshov A.A. | Published: 19.09.2013 |
| Published in issue: #8(641)/2013 | |
| Category: Calculation and Design of Machinery | |
| Keywords: endurance, uniaxial and multiaxial stress state |
Simulation of acoustic emission caused by the interaction of a high-speed jet of fluid with the material
| Authors: Barzov A.A., Galinovsky A.L., Khafizov M.V. | Published: 19.09.2013 |
| Published in issue: #8(641)/2013 | |
| Category: Calculation and Design of Machinery | |
| Keywords: water-jet cutting, acoustic emission, probabilistic mathematical modeling |
The calculation of added masses and damping coefficients of vibrating bodies in a fluid by the finite volume method as applied to the calculation of the fuel bundle parameters for the reactor VVER-440
| Authors: Krutko E.S., Sorokin F.D. | Published: 19.09.2013 |
| Published in issue: #8(641)/2013 | |
| Category: Calculation and Design of Machinery | |
| Keywords: added mass, damping coefficient, finite volume method, fuel assembly |
The study of the dynamics of metal gantry crane structures when lifting the cargo
| Authors: Spitcina D.N., Chalyy A.A. | Published: 20.09.2013 |
| Published in issue: #9(642)/2013 | |
| Category: Calculation and Design of Machinery | |
| Keywords: gantry crane, lifting the cargo, dynamic load, stiffness, stress |