Search

Catalog

Main Journal ArchiveYear 2015 / № 10

Issue: #10 (667)

DOI 10.18698/0536-1044-2015-10

Calculation and Design of Machinery

Theoretical and Experimental Research of Oscillations with Excitation by an Elastic Element

Authors: Dubinin V.V., Vitushkin V.V.
Category: Calculation and Design of Machinery
Keywords: mechanical systems, frequency characteristics, kinematic excitation, elastic link, system oscillations, laboratory unit, modeling of oscillations

Numerical Analysis of Specific Features of Droplet Breaking and Evaporation in Gas Dynamic Flow with Cyclic Shock Waves

Authors: Arefyev K.Yu., Voronetskiy A.V., Suchkov S.A.
Category: Calculation and Design of Machinery
Keywords: shock wave, mathematical simulation, two-phase flow, droplet breaking, droplet evaporation

Transportation and Power Engineering

Numerical Simulation of the Fuel Flow in the Flow Passage of the Injector Nozzle

Authors: Grishin Yu.A., Kopylov A.S.
Category: Transportation and Power Engineering
Keywords: computational fluid dynamics, injector, control volume method, nozzle, velocity field, pressure field, injection pressure, fuel cyclic feed

Analysis of Diesel Engine Management Methods in a Power Unit with Electric Transmission

Authors: Kuznetsov A.G.
Category: Transportation and Power Engineering
Keywords: simulation, diesel, power unit, engine management, driving dynamics, economical fuel consumption

Technology and Process Machines

Methods for Life-Extension and Increase of Reliability of Lubrication Systems in Internal Combustion Engines Used in Ground Transportation

Authors: Altunin V.A., Altunin K.V., Aliev I.N., Tschigolev A.A., Platonov E.N.
Category: Technology and Process Machines
Keywords: reliability, lubricant channels, filters, nozzles, deposit formation, gas turbine engines, service life, economic feasibility

Changes in the Working Surfaces of High-Speed Tools during the Cutting Process

Authors: Dreval A.E., Ardislamov V.K.
Category: Technology and Process Machines
Keywords: tool wear, metal cutting, exoelectron emission, micro hardness, thermal factor emf

Study of Plasma Hardening at Nizhny Tagil Branch of Ural Federal University

Authors: Korotkov V.A.
Category: Technology and Process Machines
Keywords: durability, surface hardening, plasma arch

Evaluation of Productive Capacity of CNC Machining Centers

Authors: Fesenko M.A., Kondakov A.I.
Category: Technology and Process Machines
Keywords: CNC machining center, productive capacity, multiproduct manufacturing, industrial resource, manufacturing operation

Aviation and Rocket-Space Engineering

Research of the Capillary Phase Separator for Fuel Tanks of Liquid Propellant Rocket Engines at Evaporation of Cryogenic Components

Authors: Avraamov H.I., Pelevin F.V., Sapozhnikov V.B., Sintsov A.L.
Category: Aviation and Rocket-Space Engineering
Keywords: liquid propellant rocket engine, multiple launch, inter-tank device, capillary phase separator

Special Features of Calculating the Composition and Temperature of Combustion Products of Superrich Oxygen-Methane Fuel

Authors: Dorofeev A.A., Yagodnikov D.A., Chertkov K.O.
Category: Aviation and Rocket-Space Engineering
Keywords: liquid propellant rocket engine, superrich oxygen-methane fuel, soot formation, chemical non-equilibrium, thermodynamic calculation, liquid gas generator