Search
Starting the diesel engine 1H9.5/8.0 by forced preheated air charge supply
| Authors: Pavlov D.V. | Published: 23.02.2022 |
| Published in issue: #3(744)/2022 | |
| Category: Energy and Electrical Engineering | Chapter: Heat Engines | |
| Keywords: diesel engine start, low temperatures, forced supply, intake air, starting frequency |
Development of a Technique for Filling Pneumatic Automation Device Chambers During Pneumatic Vacuum Tests
| Authors: Aliev A.R. | Published: 23.02.2022 |
| Published in issue: #3(744)/2022 | |
| Category: Energy and Electrical Engineering | Chapter: Hydraulic Machines and Hydropneumatic Units | |
| Keywords: gas filling technique, pneumatic vacuum tests, leak tests, filling the chamber with gas, automation of the process |
Study of Vibrational and Mechanical Properties of Pre-Tensioned Banded Stator Blades of an Axial Compressor
| Authors: Sedunin V.A., Marchenko Yu.G., Melikhov I.V., Kalinin I.A., Antropov D.V. | Published: 25.02.2022 |
| Published in issue: #3(744)/2022 | |
| Category: Energy and Electrical Engineering | Chapter: Turbomachines and Combination Turbine Plants | |
| Keywords: axial compressor, strength calculation, natural vibration frequencies, resonance, pre-tension, stator blades |
Determining the Axial Force in the Calculation of Axial Vibrations of the Piston Engine Crankshaft
| Authors: Yamanin A.I. | Published: 26.02.2022 |
| Published in issue: #3(744)/2022 | |
| Category: Energy and Electrical Engineering | Chapter: Heat Engines | |
| Keywords: crankshaft, axial vibrations, longitudinal compliance, disturbing force |
Shut-Off Valve Throughput Capacity
| Authors: Malov D.A., Chernyshev A.V., Slobodov E.B. | Published: 28.02.2022 |
| Published in issue: #3(744)/2022 | |
| Category: Energy and Electrical Engineering | Chapter: Vacuum and Compressor Technology and Pneumatic Systems | |
| Keywords: throughput capacity, shut-off valves, straight-through and direct-flow valves, numerical simulation, approach to calculation and design |
Computational Analysis of the Dynamic Qualities of a Diesel Engine and a Tracked Vehicle
| Authors: Markov V.A., Barchenko F.B., Neverov V.A., Savastenko A.A., Lotfullin Sh.R. | Published: 04.03.2022 |
| Published in issue: #3(744)/2022 | |
| Category: Energy and Electrical Engineering | Chapter: Heat Engines | |
| Keywords: diesel engine, four-stroke cycle, two-stroke cycle, external speed characteristic, dynamic engine qualities, tracked vehicle acceleration |
Selecting the Centrifugal Compressor Impeller Blade Height During Preliminary Designing
| Authors: Solovyeva O.A., Galerkin Y.B., Drozdov A.A., Soldatova K.V., Rekstin A.F., Brodnev P.N. | Published: 11.03.2022 |
| Published in issue: #3(744)/2022 | |
| Category: Energy and Electrical Engineering | Chapter: Vacuum and Compressor Technology and Pneumatic Systems | |
| Keywords: centrifugal compressor, impeller, mathematical model, loss coefficient, velocity diagram, preliminary designing |
Computational and experimental study of the working process of a promising rotary piston engine
| Authors: Kavtaradze R.Z., Kasko A.A., Zelentsov A.A. | Published: 22.03.2022 |
| Published in issue: #4(745)/2022 | |
| Category: Energy and Electrical Engineering | Chapter: Heat Engines | |
| Keywords: Wankel engine, computational and experimental study, mathematical simulation, working process |
Quantitative Assessment of the Turbine Flow Generator Parameters Based on the Requirements for Respiratory Systems
| Authors: Sedunin V.A., Marchenko Yu.G., Kalinin I.A. | Published: 27.03.2022 |
| Published in issue: #4(745)/2022 | |
| Category: Energy and Electrical Engineering | Chapter: Heat Engines | |
| Keywords: centrifugal compressor, turbine flow generator, respiratory systems, artificial lung ventilation |
Selection of the Method for Reciprocating Compressor Capacity Control When the Suction Gas Temperature Changes
| Authors: Degtyareva T.S., Perevalov P.S. | Published: 27.03.2022 |
| Published in issue: #4(745)/2022 | |
| Category: Energy and Electrical Engineering | Chapter: Heat Engines | |
| Keywords: reciprocating compressor; capacity regulation; suction gas temperature; regulation depth; shaft speed |