Search

Catalog

Main Journal ArchiveYear 2015 / № 8

Issue: #8 (665)

DOI 10.18698/0536-1044-2015-8

Calculation and Design of Machinery

Study of Elastic Properties and Stress-Strain State of a Rod Loaded Using a Cable

Authors: Naumov A.M.
Category: Calculation and Design of Machinery
Keywords: associated basis, Cartesian basis, transformation matrix, flat curved rod, method of successive loadings, state vector

Analysis of an Elastomer Cylindrical Shock-Absorber with Regard to Viscous Properties of the Material

Authors: Belkin A.E., Narskaya N.L.
Category: Calculation and Design of Machinery
Keywords: elastomer shock-absorbers, viscoelastic deformations, calculation methods, toughening factors, impact loading, diagrams of dynamic compression

Evaluation of the Influence of the Perforated Stabilizer Permeability on the Total Pressure Losses in the Fas Path

Authors: Kulakov N.N., Chernyshev A.V., Krutikov A.A.
Category: Calculation and Design of Machinery
Keywords: turbulence model, gas path, stabilizer, total pressure loss, perforation

Transportation and Power Engineering

Method of Determining Parameters of Motion of Wheeled Vehicles to Ensure the Operation of Active Safety Systems

Authors: Zhileykin M.M., Shonkarenko V.A., Yagubova E.V.
Category: Transportation and Power Engineering
Keywords: control algorithm, wheeled vehicle, active safety system, velocity vector

Model of Longitudinal Travel of a Vehicle over Cross-Country Terrain

Authors: Rudianov N.A., Larkin E.V.
Category: Transportation and Power Engineering
Keywords: vehicle, modelling, dynamic model, differential equation, mobile robot, longitudinal travel, cross-country terrain, equilibrium

Stand for Researching Contact Interaction in the System Ground — Elastic Cover — Wave Generator System of the Elastic-Screw Drive

Authors: Byakov K.E., Sorokin F.D., Mashkov K.Yu., Popkov M.V.
Category: Transportation and Power Engineering
Keywords: contact area, wave generator, elastic-screw drive, chassis research stand, contact ground pressure, shell testing stand

Technology and Process Machines

Control System for a Miniature In-Tube Robot

Authors: Vorotnikov S.A., Nikitin N.I., Ceccarelli M.
Category: Technology and Process Machines
Keywords: control system, miniature in-tube robot, modular architecture, transportation and handling de-vice, fuzzy-logic controller

Design Features of Technological Process of Tangential Turning

Authors: Skiba V.M.
Category: Technology and Process Machines
Keywords: tooling, designing, technological process, tangential turning, turning efficiency

Improving the Efficiency of Grinding Using a Halogen Generating Impregnator

Authors: Nosenko V.A., Mitrofanov A.P., Krutikova A.A.
Category: Technology and Process Machines
Keywords: grinding, surface roughness, abrasive tool, impregnator, titanium alloy, chlorine concentration, grinding force, grinding ratio

Calculations of Actuator Promising Designs

Authors: Gavrushin S.S., McMillan A., Nikolaeva A.S., Podkopaeva T.B.
Category: Technology and Process Machines
Keywords: large displacements, actuator, nonlinear deformation, thin-walled shell, «snap-through»

Workflow Planning System for a Machine Building Enterprise With Assembly Line Manufacturing

Authors: Ermolova M.A.
Category: Technology and Process Machines
Keywords: algorithm, scheduling theory, machining, planning, machine-building enterprises, assembly line production, aggregation methods, software system