Search
The Influence of Fillers and Dyes on the Quality of Weld Joints at Ultrasonic Welding of Plastics
| Authors: Volkov S.S., Konovalov A.V., Remizov A.L. | Published: 13.01.2020 |
| Published in issue: #1(718)/2020 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Welding, Allied Processes and Technologies | |
| Keywords: ultrasonic welding, elasticity module, amplitude of fluctuations of the waveguide, welding pressure, plastic state, coefficient of specific power |
Structural Synthesis of a Family of Planar 8-Link Kinematic Chains for Linkages with Multiple Joints and the Most Complex Ternary Link
| Authors: Pozhbelko V.I., Kuts E.N. | Published: 13.01.2020 |
| Published in issue: #1(718)/2020 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Theory of Mechanisms and Machines | |
| Keywords: structural synthesis, MJ-mechanism, independent closed loops, three-joint link, multiple joint |
A Study of the Possibility of Reducing Residual Stresses and Strains in Welded Joints by Ultrasonic Treatment
| Authors: Volkov S.S., Konovalov A.V., Shestel L.A. | Published: 10.02.2020 |
| Published in issue: #2(719)/2020 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Welding, Allied Processes and Technologies | |
| Keywords: amplitude of ultrasonic vibrations, residual stresses, welded joints, ultrasonic treatment, welded structures, plastic deformations |
Systematic Analysis and Application of Multi-Loop Linkages with Multiple Joints in Modern Mechanical Engineering
| Authors: Pozhbelko V.I., Kuts E.N. | Published: 10.02.2020 |
| Published in issue: #2(719)/2020 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Theory of Mechanisms and Machines | |
| Keywords: multi-link lever mechanism, multiple joint, closed kinematic chain, mobility |
Developing a Method of Hydroerosive Saturation of Liquids with Microparticles of Target Materials Using Ultrajet
| Authors: Galinovsky A.L., KYAW Myo Htet, Provatorov A.S. | Published: 03.03.2020 |
| Published in issue: #3(720)/2020 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment for Mechanical and Physico-Technical Processing | |
| Keywords: suspension methods, ultrajet processing, microparticles of target materials |
Development and Research of the Main Features of Joining Plastics and Metals
| Authors: Volkov S.S., Rozanov D.S., Stankevich I.V. | Published: 03.03.2020 |
| Published in issue: #3(720)/2020 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Welding, Allied Processes and Technologies | |
| Keywords: metal reinforcement, ultrasonic formation, static pressure, waveguide oscillation amplitude, working waveguide end, ultrasonic pulse duration |
A Study of the Influence of Electron Beam Welding Defects on Fracture Processes in Titanium Alloys
| Authors: Grigoriev V.V., Muravyev V.I., Bakhmatov P.V. | Published: 03.03.2020 |
| Published in issue: #3(720)/2020 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Welding, Allied Processes and Technologies | |
| Keywords: titanium alloys, electron beam welding, specific defects, fracture in static and dynamic tests, strength, strength, toughness, deformation diagrams |
The Influence of Technological Parameters of the Plasma Spraying Process on the Macrostructure of Titanium Coatings
| Authors: Babin S.V., Egorov E.N., Fursov A.A. | Published: 06.04.2020 |
| Published in issue: #4(721)/2020 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment for Mechanical and Physico-Technical Processing | |
| Keywords: capillary porous surface, titanium coating, spraying angle, surface macrostructure, surface roughness of the supporting plate |
Features of the Heating Process in Ultrasonic Welding of Polycarbonate Products under Independent Pressure
| Authors: Volkov S.S., Remizov A.L., Pankratov A.S. | Published: 06.04.2020 |
| Published in issue: #4(721)/2020 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Welding, Allied Processes and Technologies | |
| Keywords: ultrasonic welding, acoustic contact pressure, static welding pressure, weld strength, independent pressure, edge preparation |
An Intelligent System of Semi-Automatic Design of Cylindrical Gear Reducers with a Choice of Best Solutions
| Authors: Eugenev G.B. | Published: 13.04.2020 |
| Published in issue: #4(721)/2020 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: artificial intelligence, multiagent systems, semi-automatic CAD, software tools |