Search
Hardening by Torsion and Process Modelling
| Authors: Karatushin S.I., Khramova D.A., Pleschanova Y.A. | Published: 19.02.2019 |
| Published in issue: #2(707)/2019 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Manufacturing Engineering | |
| Keywords: hardening by torsion, ANSYS Workbench, residual stresses, patenting |
Distribution of Temperatures and Assessment of Durability along the Width of a Butt Weld at Ultrasonic Welding of Plastics
| Authors: Volkov S.S., Nerovnyy V.M., Shestel L.A. | Published: 19.02.2019 |
| Published in issue: #2(707)/2019 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Welding, Allied Processes and Technologies | |
| Keywords: width of a welded seam, ultrasonic welding, butt connections, durability of welded connections, thermal cycles, cutting of edges |
Design Verification and Testing of Road Tankers Transporting Dangerous Goods
| Authors: Chondros T.G., Chondrou D.T., Papadigiannis A.S., Chondrou I.T., Fainekos E., Panteliou S.D. | Published: 19.02.2019 |
| Published in issue: #2(707)/2019 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machines, Units and Processes (by Industry Branch) (Technical) | |
| Keywords: ADR, dangerous goods, road transportation, road-tankers, inspection and test-ing, design verification, Regulation for roll-over protection R-111 |
Justification of Tool Life and Strength of Cutters when Turning Grooves in Workpieces Made of Structural Steel with Increased Hardness
| Authors: Grubyi S.V., Chaevskiy P.A. | Published: 12.03.2019 |
| Published in issue: #3(708)/2019 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment for Mechanical and Physico-Technical Processing | |
| Keywords: groove cutter, tool strength, tool life, cutting speed, cutting speed, cutting layer thickness |
The Influence of Tool Orientation on Cutting Forces during End Milling
| Authors: Ponomarev B.B., Nguyen Sy Hien | Published: 12.03.2019 |
| Published in issue: #3(708)/2019 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Manufacturing Engineering | |
| Keywords: tool orientation, five-axis milling, tilt angle, lead angle, ball end mill, cutting forces |
Development of Technology and Equipment for Ultrasonic Planimetric Welding of Polyethylene Products
| Authors: Volkov S.S., Korolev S.A., Shestel L.A. | Published: 12.03.2019 |
| Published in issue: #3(708)/2019 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Welding, Allied Processes and Technologies | |
| Keywords: planimetric wave guide, amplitude of fluctuations of a wave guide, planimetric ultrasonic welding, working surface of a wave guide, polyethylene can, sound-absorbing plates |
An Analysis of Destructive Methods of Thin Films Thickness Measurement
| Authors: Shupenev A.E., Pankova N.S., Korshunov I.S., Grigoriyants A.G. | Published: 12.03.2019 |
| Published in issue: #3(708)/2019 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: thin films thickness, bevel cut method, spherical cut method, stylus profilometry, atomic-force microscopy |
On the Analytical Approach to the Selection of a Centroid in a Flat Gearing
| Authors: Ioffe M.L. | Published: 12.03.2019 |
| Published in issue: #3(708)/2019 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machines, Units and Processes (by Industry Branch) (Technical) | |
| Keywords: flat gearing, centroid, gear ratio, involute, epicycloid, hypocycloid |
The Temperature in the Cutting Zone when Applying Deformational Cutting to Form a Hardened Layer
| Authors: Vasiliev S.G., Shulyak Y.I. | Published: 15.04.2019 |
| Published in issue: #4(709)/2019 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment for Mechanical and Physico-Technical Processing | |
| Keywords: deformational cutting, cutting zone temperature, strain hardening, hardened macrorelief |
The Development of a Digital Twin of a Cutting Tool for Mechanical Production
| Authors: Kabaldin Y.G., Shatagin D.A., Kuzmishina A.M. | Published: 15.04.2019 |
| Published in issue: #4(709)/2019 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment for Mechanical and Physico-Technical Processing | |
| Keywords: cutting tool, neural network models, digital twin, choice of coating composition, tool wear |