Search
The Influence of the Direction and Geometry of the Working Tool on the Stress-Strain State of Cylindrical Parts in Oscillating Burnishing
| Authors: Zaides S.A., Nguyen Van Hinh | Published: 04.09.2018 |
| Published in issue: #8(701)/2018 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment for Mechanical and Physico-Technical Processing | |
| Keywords: oscillating burnishing, residual stresses, depth of the plastic zone, deformation zone, rotational angle of the working tool, profile radius of the tool |
PLM-Strategy in Small-Scale Production in the Machine-Building Industry
| Authors: Bulavin V.F., Yakhrichev V.V., Glazkov V.A. | Published: 04.09.2018 |
| Published in issue: #8(701)/2018 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Manufacturing Engineering | |
| Keywords: small enterprises, 3D-models, design and technological preparation of production, PLM-technologies |
Russian Technologies for Creation of Industry 4.0 Systems. Part 1
| Authors: Eugenev G.B. | Published: 04.09.2018 |
| Published in issue: #8(701)/2018 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Manufacturing Engineering | |
| Keywords: Industry 4.0, digital manufacturing, intelligent systems, CAPP, CAM, MES |
Some Features of Non-Conservative Stability Problems of Mechanical Systems
| Authors: Radin V.P., Chirkov V.P., Shchugorev A.V., Shchugorev V.N. | Published: 04.09.2018 |
| Published in issue: #8(701)/2018 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Theory of Mechanisms and Machines | |
| Keywords: three-link pendulum, equilibrium position, non-conservative loading, stability loss criteria, boundaries of divergence and flutter |
The Calculation and Selection of Bearings of Increased Reliability
| Authors: Syromyatnikov V.S., Garcia Martinez Juan Marcos, Samora Quintana Laura Angelica, Ortega Rosales Miguel Gersaun | Published: 08.10.2018 |
| Published in issue: #9(702)/2018 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: bearing service life, bearings reliability, dynamic load-carrying capacity, Weibull distribution, failure distribution function |
The Surface Roughness of Carbide Punches when Grinding by Diamond Wheels Manufactured Using the Multi-Layer Composite Electrolytic Coating Technology
| Authors: Shavva M.A., Grubyi S.V. | Published: 08.10.2018 |
| Published in issue: #9(702)/2018 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment for Mechanical and Physico-Technical Processing | |
| Keywords: diamond grinding, surface roughness, diamond wheel, composite electrolytic coating |
Russian Technologies for Creation of Industry 4.0 Systems. Part 2
| Authors: Eugenev G.B. | Published: 08.10.2018 |
| Published in issue: #9(702)/2018 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Manufacturing Engineering | |
| Keywords: Industry 4.0, digital industrial technologies, advanced robotics, additive technologies, augmented reality, modeling of technological processes |
The Determination of Instants of the Change of Modes of a Dynamic System Using the Indicator Function of the Number of States
| Authors: Tukmakov A.L., Tukmakova N.A. | Published: 08.10.2018 |
| Published in issue: #9(702)/2018 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Methods and Devices for Monitoring and Diagnosing Materials, Products, Substances | |
| Keywords: dynamic system, acoustic signal, temporary realization, phase space, set of states, window function, change of dynamic mode, indicator function |
An Experimental Study of the Effect of Screw Tightening on the Resonance Frequencies of a Cantilever Beam
| Authors: Kuts M.S. | Published: 08.10.2018 |
| Published in issue: #9(702)/2018 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Theory of Mechanisms and Machines | |
| Keywords: technological machines, contact pliability, nonlinear vibrations, assembled unit resonance, natural frequencies |
On the Full Annular Rub in the Flexible Rotor — Compliant Stator System due to Friction
| Authors: Nikiforov A.N. | Published: 25.10.2018 |
| Published in issue: #10(703)/2018 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: rotor-stator system, contact rotor dynamics, backward precession, frequency and amplitude of vibration |