Search
Determining Deformations of Parts when Tightening Bolted Joints
| Authors: Ryahovskiy O.A., Syromyatnikov V.S. | Published: 25.10.2018 |
| Published in issue: #10(703)/2018 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: bolted connection, tightening force, deformation of joint elements, nut rotation angle, screwing torque, moment of force in thread |
Theoretical Calculation of Parameters of the Cut Layer Cross Section when Thread Milling
| Authors: Malkov O.V., Golovko I.M., Karelskiy A.S. | Published: 25.10.2018 |
| Published in issue: #10(703)/2018 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment for Mechanical and Physico-Technical Processing | |
| Keywords: thread milling, thread milling cutter, cross section of the cut layer, thickness of the cut layer, engagement angle |
Stress-Strain State in the Joint Zone During Wedge-Press Welding of Dissimilar Materials
| Authors: Khazgaliev R.G., Imayev M.F., Mulyukov R.R., Safin F.F. | Published: 25.10.2018 |
| Published in issue: #10(703)/2018 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Welding, Allied Processes and Technologies | |
| Keywords: computer simulation, wedge-press welding, dissimilar materials, strain distribution, stress distribution |
A Comparative Assessment of Efficiency of Foreign-Made Friction Pairs with Solid Lubricant Coating when in Sliding and Reverse Motion
| Authors: Khopin P.N., Trunova E.A. | Published: 25.10.2018 |
| Published in issue: #10(703)/2018 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Methods and Devices for Monitoring and Diagnosing Materials, Products, Substances | |
| Keywords: solid lubricant coatings, durability assessment, reverse friction, sliding friction |
Dynamic Processes of Fuel Assemblies Lifting in the VVER-440 Reactor
| Authors: Solonin V.I., Krapivtsev V.G., Perevezentsev V.V. | Published: 25.10.2018 |
| Published in issue: #10(703)/2018 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machines, Units and Processes (by Industry Branch) (Technical) | |
| Keywords: VVER-440 reactor, fuel assembly lifting conditions, fuel rods vibration, forces acting on fuel assembly |
An Analysis of Contact Interaction of the Cylinder Roller with the Bearing Races Using the Finite Element Method
| Authors: Sorokin F.D., Hao Zhang | Published: 03.12.2018 |
| Published in issue: #11(704)/2018 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: contact interaction, cylindrical bearing, finite element method, least square method |
A Mechanism of Transition of Austenite to Martensite During Cold Plastic Deformation of Austenitic Steels
| Authors: Bubnov V.A. | Published: 03.12.2018 |
| Published in issue: #11(704)/2018 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Manufacturing Engineering | |
| Keywords: austenitic steels, austenite, martensite, plastic deformation, degree of deformation, strain hardening |
Structural Characteristics of Two-Phase Flows in Vertical Channels of Nuclear Power Plant Cooling Systems in the Natural Circulation Mode
| Authors: Isakov N.Sh., Perevezentsev V.V. | Published: 03.12.2018 |
| Published in issue: #11(704)/2018 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machines, Units and Processes (by Industry Branch) (Technical) | |
| Keywords: vertical channel, two-phase flow, natural circulation, void fraction, structural characteristics, nuclear power plants |
The Development of a Flat Parallel Structure Mechanism with One Degree of Freedom for Excitation of Vibrations on Any Kinematic Screw
| Authors: Didenko E.V., Glazunov V.A., Filippov G.S. | Published: 03.12.2018 |
| Published in issue: #11(704)/2018 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Theory of Mechanisms and Machines | |
| Keywords: parallel structure mechanism, vibration table, one degree of freedom, flat oscillatory motion, kinematic screw |
On the Calculation of the Dynamics of a Circular Saw of the Robotic Woodworking Assembly
| Authors: Karpachev A.Yu., Voyakin А.S. | Published: 24.12.2018 |
| Published in issue: #12(705)/2018 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment for Mechanical and Physico-Technical Processing | |
| Keywords: circular saw, saw blade, translatory rotational speed, Coriolis acceleration |