Search
Milling Cutters for Processing Highly Hard Materials
Authors: Mokritskiy B.Y. | Published: 10.04.2022 |
Published in issue: #5(746)/2022 | |
Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment for Mechanical and Physico-Technical Processing | |
Keywords: solid material processing, period of life, end mills |
On Vibration Control of Turbo Generators K-1200-6.8/50+ Т3В-1200-2АУЗ Installed in the First and Second Units of Novovoronezh Nuclear Power Plant
Authors: Arkadov G.V., Gusev I.N., SlepovM.T., Usachev D.E., Esperov D.G. | Published: 11.04.2022 |
Published in issue: #5(746)/2022 | |
Category: Mechanical Engineering and Machine Science | Chapter: Methods and Devices for Monitoring and Diagnosing Materials, Products, Substances | |
Keywords: spectral composition of vibration, turbo generator vibration control, rotor resonance, stator overhang, water cooling, axial oscillations in supports |
Analytical Evaluation of the Velocity Fluctuation of Pulse Continuously Variable Transmissions
Authors: Sharkov O.V., Kalinin A.V. | Published: 15.04.2022 |
Published in issue: #5(746)/2022 | |
Category: Mechanical Engineering and Machine Science | Chapter: Theory of Mechanisms and Machines | |
Keywords: machine drive, pulse continuously variable transmission, free-running mechanism, kinematic analysis, coefficient of velocity fluctuation, mathematical model |
Research of the Cylindrical Self-Braking Gears Effect on the Drive Operation in Various Modes
Authors: Timofeev G.A., Panyukhin V.V., Samoilova V.V., Novikov E.S. | Published: 20.04.2022 |
Published in issue: #5(746)/2022 | |
Category: Mechanical Engineering and Machine Science | Chapter: Theory of Mechanisms and Machines | |
Keywords: electromechanical drive, cylindrical self-braking gear, dynamic models, equations of motion, drive characteristics |
Analysis of the Operating Modes of the Hybrid Underwater Robotic System
Authors: Veltishchev V.V., Aladysheva E.I. | Published: 20.05.2022 |
Published in issue: #6(747)/2022 | |
Category: Mechanical Engineering and Machine Science | Chapter: Robots, Mechatronics and Robotic Systems | |
Keywords: hybrid underwater vehicle, autonomous uninhabited underwater vehicle, remotely operated underwater vehicle, towing mode, joint movement, working area |
Influence of Redesign of the Vessel Hull Structure for Additive Manufacturing on Stability Characteristics
Authors: Dektyarev A.V., Zobov P.G., Mulenkova M.V., Morozov V.N. | Published: 21.05.2022 |
Published in issue: #6(747)/2022 | |
Category: Mechanical Engineering and Machine Science | Chapter: Manufacturing Engineering | |
Keywords: additive technologies, 3D printing, vessel stability, shipbuilding, hull design optimization, small ship |
Influence of the Number of Starts of the Thread on the Drive Nut of the Planetary Roller-Screw Drive on the Efficiency of the Mechanism
Authors: Ryahovskiy O.A., Romanov N.O. | Published: 25.05.2022 |
Published in issue: #6(747)/2022 | |
Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
Keywords: planetary roller screw mechanism, number of starts of the thread, basic design life |
The structure of the Simulation Model of the Probabilistic Process of Forming the Accuracy of the Required Dimensions
Authors: Denchik A.I., Kasenov A.Zh., Galinovsky A.L., Musina Zh.K., Abishev K.K., Tkachuk A.A. | Published: 29.05.2022 |
Published in issue: #6(747)/2022 | |
Category: Mechanical Engineering and Machine Science | Chapter: Manufacturing Engineering | |
Keywords: accuracy of required dimensions, scale factor, probabilistic model, simulation modeling, functionally significant technological disturbance |
On the Efficiency of Controlling the Compression Ratio of an Internal Combustion Engine
Authors: Agalarov J.H., Hasanova T.J. | Published: 01.06.2022 |
Published in issue: #6(747)/2022 | |
Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
Keywords: rotation speed, combustion front, compression ratio, spark ignition, crankshaft, fuel pressure reduction |
Reducing Additive Product Surface Roughness by Electrochemical Processing Methods
Authors: Smirnov A.S., Galinovsky A.L., Martysyuk D.A. | Published: 22.06.2022 |
Published in issue: #7(748)/2022 | |
Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment for Mechanical and Physico-Technical Processing | |
Keywords: additive technologies, electrochemical polishing, electrolyte-plasma polishing, AlSi10Mg, surface roughness, roughness class |