Search
Problems Associated with Design and Manufacturing of Parts Based on Particulate-Filled Polymer Composites
| Authors: Notin I.A. | Published: 24.12.2018 |
| Published in issue: #12(705)/2018 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Manufacturing Engineering | |
| Keywords: design of engineering parts, polymer composite materials, strength characteristics, manufacturability of composite materials |
On the Issue of Technological Support for the Serial Production of Cycloid Pinions
| Authors: Petrovskiy A.N., Druzhinin G.A., Laptev A.I. | Published: 24.12.2018 |
| Published in issue: #12(705)/2018 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Manufacturing Engineering | |
| Keywords: cycloidal gears, serial production, accuracy control, electroerosion treatment, wire-cutting machine, stacked workpiece machining |
The Development of One-Degree-of-Freedom Parallel Structure Mechanisms with a Circular Guide
| Authors: Fomin A.S., Glazunov V.A. | Published: 24.12.2018 |
| Published in issue: #12(705)/2018 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Theory of Mechanisms and Machines | |
| Keywords: degree of freedom, kinematic pair, parallel structure mechanism, hexapod |
Pressure Distribution in the Area Around a Tightened Single Bolt Joint
| Authors: Kuts M.S. | Published: 24.01.2019 |
| Published in issue: #1(706)/2019 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: contact pliability, interface finite element, single bolted joint, contact layer roughness |
Cutting Forces During Strain Hardening of Austenitic Steel by the Method of Deformational Cutting
| Authors: Shulyak Y.I. | Published: 24.01.2019 |
| Published in issue: #1(706)/2019 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment for Mechanical and Physico-Technical Processing | |
| Keywords: deformational cutting, cutting forces components, strain hardening, macrorelief |
Changes in the Structure and Microhardness of Permanent Joints of Load-Bearing Structures Made of Titanium Alloy VT23 by Electron Beam Welding
| Authors: Grigoriev V.V., Muravyev V.I., Bakhmatov P.V. | Published: 24.01.2019 |
| Published in issue: #1(706)/2019 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Welding, Allied Processes and Technologies | |
| Keywords: electron beam welding, fusion line, porosity, titanium alloys, capillary-condensed moisture |
Evaluation of the Influence of Manufacturing Faults in Gears on the Quality Indicators of Aircraft Actuators
| Authors: Novikov E.S., Silchenko P.N., Timofeev G.A., Krasavin S.I. | Published: 24.01.2019 |
| Published in issue: #1(706)/2019 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Theory of Mechanisms and Machines | |
| Keywords: fine pitch gears, tooth profile, quality indicators, manufacturing fault, contact ratio, pressure angle |
Selection of an Asynchronous Motor for the Belt Conveyor Drive with a Parallel-Shaft Gearbox
| Authors: Lustenkov M.E., Skaryno B.B., Lustenkova E.S. | Published: 19.02.2019 |
| Published in issue: #2(707)/2019 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: asynchronous motor, electromechanical conveyor drive, gear ratio, parallel-shaft gearbox, gear train |
A Parametric Study of Elastic Properties of Gasdynamic Foil Thrust Bearings Using a One-Dimensional Fluid Flow Model
| Authors: Temis M.Y., Meshcheryakov A.B. | Published: 19.02.2019 |
| Published in issue: #2(707)/2019 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
| Keywords: gasdynamic bearing, elastogasdynamic contact, Reynolds equation, self-correction step method, thrust bearing |
Finite Control of Actuators of Machines for Ultra-Jet Processing and Diagnostics of Materials
| Authors: Kazantsev V.P., Bochkarev S.V. | Published: 19.02.2019 |
| Published in issue: #2(707)/2019 | |
| Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment for Mechanical and Physico-Technical Processing | |
| Keywords: ultra-jet materials processing, diagnostics of materials, synthesis of control systems, drive control, finite control |