Search
Elastic wave 3D scattering on a crack edge in the weld joint
Authors: Mogilner L.Yu., Krysko N.V. | Published: 23.02.2024 |
Published in issue: #3(768)/2024 | |
Category: Mechanical Engineering and Machine Science | Chapter: Methods and Devices for Monitoring and Diagnosing Materials, Products, Substances | |
Keywords: elastic waves, crack edge, longitudinal wave 3D scattering, ultrasonic flaw detection |
Load distribution along the pinion rim width of a multi-threaded planetary gear with the teeth increased pliability at the ends
Authors: Plekhanov F.I., Ovsyannikov A.V. | Published: 28.02.2024 |
Published in issue: #3(768)/2024 | |
Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
Keywords: planetary gear, flexible teeth at the ends, load along the rim width |
On the problem of optimizing vibration protection systems based on the bilinear hysteresis elements
Authors: Poznyak E.V., Radin V.P., Novikova O.V., Kiselev A.V. | Published: 28.02.2024 |
Published in issue: #3(768)/2024 | |
Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
Keywords: vibration protection systems, rubber-metal shock absorber, multidimensional global optimization, optimality criterion, nonlinear dynamic systems, seismic impact, genetic algorithm |
Influence of the outflow device shape on energy characteristics of the Turo-type torque flow pump
Authors: Svoboda D.G., Zharkovskii A.A., Klyuyev A.S., Adrianov A.V., Gorbatov D.A. | Published: 04.03.2024 |
Published in issue: #3(768)/2024 | |
Category: Mechanical Engineering and Machine Science | Chapter: Hydraulic Machines, Vacuum, Compressor Technology, Hydraulic and Pneumatic Systems | |
Keywords: torque flow pump, flow part, integral parameters, pump efficiency, energy characteristics |
LSPwC influence on the surface layer parameters of the titanium alloy GTE compressor blades
Authors: Shiryaev А.А., Gabov I.G., Milenin A.S., Popova Yu.V. | Published: 06.03.2024 |
Published in issue: #3(768)/2024 | |
Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment for Mechanical and Physico-Technical Processing | |
Keywords: laser shock, laser shock peening, blade surface roughness, residual compressive stresses, surface morphology, titanium alloy, blade deformation |
Design of wave gear transmissions with disc and cam wave generators
Authors: Timofeev G.A., Balasanyan V.V. | Published: 12.03.2024 |
Published in issue: #3(768)/2024 | |
Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
Keywords: electromechanical drive, wave gear transmission, quality indicators, disk and cam wave generators |
Pulse-vacuum system operation in collecting the industrial fine-dyspersated solid waste
Authors: Velikanov N.L., Naumov V.A. | Published: 19.03.2024 |
Published in issue: #4(769)/2024 | |
Category: Mechanical Engineering and Machine Science | Chapter: Hydraulic Machines, Vacuum, Compressor Technology, Hydraulic and Pneumatic Systems | |
Keywords: pulse-vacuum system, vacuum pump, receiver, polydisperse solid waste |
Low-plastic burnishing impact on the surface layer parameters of samples of the gas turbine engine compressor blades made of titanium alloy
Authors: Gabov I.G., Milenin A.S., Shiryaev А.А., Popova Yu.V. | Published: 21.03.2024 |
Published in issue: #4(769)/2024 | |
Category: Mechanical Engineering and Machine Science | Chapter: Technology and Equipment for Mechanical and Physico-Technical Processing | |
Keywords: low-plasticity burnishing, roughness and micro-hardness, residual stresses, blade microstructure, titanium blade, sample surface layer |
Evaluation of the force fit conical joint load-bearing capacity for components made of the carbon-carbon composite materials
Authors: Lodyakov A.O., Lyubchenko M.A., Magnitsky I.V. | Published: 22.03.2024 |
Published in issue: #4(769)/2024 | |
Category: Mechanical Engineering and Machine Science | Chapter: Machine Science | |
Keywords: carbon-carbon composite materials, conical joint, force fit, friction coefficient, load-bearing capacity |
Pulse-vacuum system operation in collecting the industrial fine-dyspersated solid waste
Authors: Koryagin S.I., Sharkov O.V., Velikanov N.L. | Published: 24.03.2024 |
Published in issue: #4(769)/2024 | |
Category: Mechanical Engineering and Machine Science | Chapter: Robots, Mechatronics and Robotic Systems | |
Keywords: pulse-vacuum system, vacuum pump, receiver, polydisperse solid waste |