Search
The study of two-phase flow characteristics by a non-invasive method
| Authors: Voronetskiy A.V., Khodykin A.A. | Published: 06.12.2013 |
| Published in issue: #12(645)/2013 | |
| Category: Technology and Process Machines | |
| Keywords: thermal spraying, electric arc metal spraying, two-phase flow, non-invasive diagnostics |
Equipment for protecting against harmful emissions (noise, light radiation, and aerosols) within allowable concentrations for program-controlled semi-automatic machines for thermal cutting of metals
| Authors: Otkidach L.G. | Published: 24.01.2014 |
| Published in issue: #1(646)/2014 | |
| Category: Technology and Process Machines | |
| Keywords: protective device, thermal cutting machines, plasma torch, gas-hydrodynamic path, light emission, aerosols, liquid melt |
Synthesis of discrete microactuators from specified functional parameters
| Authors: Gavryushin S.S., McMillan A., Nikolaeva A.S. | Published: 29.01.2014 |
| Published in issue: #1(646)/2014 | |
| Category: Technology and Process Machines | |
| Keywords: microactuator, thin-walled shell, large displacements, nonlinear deformation, optimization, synthesis of structures |
Splitting the triple frequency of oscillations of an elastic structure comprising perpendicular rotors
| Authors: Arinchev S.V., Rachkin D.A. | Published: 29.01.2014 |
| Published in issue: #1(646)/2014 | |
| Category: Technology and Process Machines | |
| Keywords: elastic structure, rotor, perpendicular axes of rotation, triple frequency splitting |
Vibrodiagnostics of technical conditions of worm gears from the driven shaft nonuniform rotation
| Authors: Andrienko L.A., Vyaznikov V.A. | Published: 29.01.2014 |
| Published in issue: #1(646)/2014 | |
| Category: Technology and Process Machines | |
| Keywords: vibrodiagnostics, worm gear, wear, angle encoder |
Predicting the quality of weld joints by monitoring the process of contact flash-butt welding
| Authors: Konovalov N.A., Erofeev V.A., Poloskov S.I. | Published: 29.01.2014 |
| Published in issue: #1(646)/2014 | |
| Category: Technology and Process Machines | |
| Keywords: contact butt welding, quality, model of welding process, monitoring, intelligent control system, weld joint |
Experimental modeling of the behavior of welded joints with discontinuities under critical loads
| Authors: Zakharov M.N., Nasonov V.A. | Published: 27.02.2014 |
| Published in issue: #2(647)/2014 | |
| Category: Technology and Process Machines | |
| Keywords: welding defects, welded joint, weld, strength, strength |
Study of roughness characteristics of a coating deposited by plasma spraying
| Authors: Marakhtanov M.K., Klimenko G.K., Kyaw W.N. | Published: 27.02.2014 |
| Published in issue: #2(647)/2014 | |
| Category: Technology and Process Machines | |
| Keywords: granulometric composition, plasma spraying, powder material, surface roughness |
Study of the build-up process when turning high-speed steel by form tools
| Authors: Danilenko B.D., Yurenkova L.R. | Published: 27.02.2014 |
| Published in issue: #2(647)/2014 | |
| Category: Technology and Process Machines | |
| Keywords: form tool, build-up edge, cutting speed, cutting speed, stability, high-speed steel |
Noname
| Authors: Rybakov G.M. | Published: 21.03.2014 |
| Published in issue: #1(592)/2008 | |
| Category: Technology and Process Machines | |
| Keywords: |