Search
The Comparative Analysis and Synthesis of Methods for Correction of Thermal Deformations in Machine Tools
| Authors: Yagopolskiy A.G., Vinnikov D.A. | Published: 27.01.2017 |
| Published in issue: #1(682)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: machine tool, working unit, correction method, thermal deformation, actuating mechanism, machining inaccuracy, comparative analysis |
Testing and Implementing the Process of Groove Cutting on the Part «Insert» Using Vortex Method
| Authors: Nadirov Y.M. | Published: 27.01.2017 |
| Published in issue: #1(682)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: groove, roughness, feed, adjustment, accuracy, tools |
Quality Control of Welded Joint During Ultrasonic Welding of Plastics
| Authors: Volkov S.S., Deryabin A.A., Kholodov S.S. | Published: 20.02.2017 |
| Published in issue: #2(683)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: ultrasonic welding, vibration amplitude of the support, ultrasonic wave frequency, kinetic characteristics, joint weld strength, in-process control |
Criterion-Based Assessment of the Technological Configuration of Metal-Cutting Machines with Cycloidal Scheme of Part Shaping
| Authors: Ivanov D.V. | Published: 20.02.2017 |
| Published in issue: #2(683)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: cycloidal shaping, evaluation criteria, technological layout, gearing ratio |
Simulation of the Metal Bar Heating Process Using the Macromolecule Approach
| Authors: Arinchev S.V. | Published: 20.02.2017 |
| Published in issue: #2(683)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: solid body, macromolecule hotness, macromolecule kinetic energy |
The Methods of Calculation of Cutting Forces for Diamond Grinding of Brittle Optical Materials
| Authors: Shavva M.A. | Published: 20.02.2017 |
| Published in issue: #2(683)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: diamond grinding, machining of brittle materials, cutting force during grinding |
The Study of Conditions for the Formation of an Adsorption Monolayer in the Linear Frictional Contact on Friction Surfaces Using a Non-Abrasive Lubricant
| Authors: Abramov A.N., Kharchenko M.V., Dema R.R. | Published: 20.02.2017 |
| Published in issue: #2(683)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: friction torque, lubricant materials, burnishing, worn volume |
Dynamic Modeling of the Grain Peak Distribution on the Working Surface of Abrasive Tools when Grinding Using Transition Probabilities
| Authors: Nosenko V.A., Fedotov E.V., Danilenko M.V. | Published: 20.02.2017 |
| Published in issue: #2(683)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: metal grinding, abrasive tools, grain peak, grain distribution, mathematical model, Markov’s process, wear type |
Increasing the Efficiency of Gear Teeth Grinding by Copying Using Management of the Cutting Depth
| Authors: Rasulov N.M., Shabiev E.T. | Published: 20.02.2017 |
| Published in issue: #2(683)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: cutting depth, grinding by copying, grinding efficiency, heat generation power, roughness reduction, abrasive wheel |
The Study of Thermal and Deformation Processes in Ultrasonic Welding of ABS Plastics
| Authors: Volkov S.S., Bigus G.A., Shestel L.A. | Published: 24.03.2017 |
| Published in issue: #3(684)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: frequency of ultrasonic fluctuations, amplitude of the waveguide oscillations, static welding pressure, compression deformation, ultrasonic welding |