Search
Analysis of the Interaction between the Abrasive Jet Stream and the Inner Surface of the Jet Forming Nozzle
| Authors: Gerasimova A.M., Galinovsky A.L., Kolpakov V.I. | Published: 28.09.2015 |
| Published in issue: #9(666)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: hydroabrasive processing, abrasive particles, jet forming nozzle, numerical simulation |
The Influence of Axial Deformations on the Flatness Deviation of the Bearing Race End Surface During Grinding
| Authors: Nosenko V.A., Tyshkevich V.N., Orlov S.V., Sarazov A.V. | Published: 28.09.2015 |
| Published in issue: #9(666)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: bearing race, axial deformation, flatness deviation, grinding |
Study of the Acoustic Efficiency of Mufflers
| Authors: Agrafonova A.A., Smirnov S.G., Tupov V.V. | Published: 28.09.2015 |
| Published in issue: #9(666)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: gas blower, noise, sound pressure level, muffler, transmission loss, finite element method, numerical modelling |
Methods for Life-Extension and Increase of Reliability of Lubrication Systems in Internal Combustion Engines Used in Ground Transportation
| Authors: Altunin V.A., Altunin K.V., Aliev I.N., Shchigolev A.A., Platonov E.N. | Published: 29.10.2015 |
| Published in issue: #10(667)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: lubricant channels, filters, nozzles, deposit formation, gas turbine engines, service life, reliability, economic feasibility |
Changes in the Working Surfaces of High-Speed Tools during the Cutting Process
| Authors: Dreval A.E., Ardislamov V.K. | Published: 29.10.2015 |
| Published in issue: #10(667)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: metal cutting, tool wear, exoelectron emission, micro hardness, thermal factor emf |
Study of Plasma Hardening at Nizhny Tagil Branch of Ural Federal University
| Authors: Korotkov V.A. | Published: 29.10.2015 |
| Published in issue: #10(667)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: surface hardening, plasma arch, durability |
Evaluation of Productive Capacity of CNC Machining Centers
| Authors: Fesenko M.A., Kondakov A.I. | Published: 29.10.2015 |
| Published in issue: #10(667)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: CNC machining center, productive capacity, multiproduct manufacturing, industrial resource, manufacturing operation |
The Method of Determining the Conditions for Machining Thin-Walled Parts
| Authors: Gavryushin S.S., Zhargalova А.D., Lazarenko G.P., Semisalov V.I. | Published: 20.11.2015 |
| Published in issue: #11(668)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: machining by cutting, thin-walled part, technological deformation, cutting mode |
Evaluation of the Mutual Effect of Through Crossing Cracks
| Authors: Chernyatin A.S. | Published: 20.11.2015 |
| Published in issue: #11(668)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: crossing cracks, stress intensity factors, T-stresses, biaxial loading ratio, finite element method |
Modelling of Nonlinear-Elastic Properties of Composites with Finite Deformations by Asymptotic Homogenization Method
| Authors: Dimitrienko Yu.I. | Published: 20.11.2015 |
| Published in issue: #11(668)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: laminated composites, non-linear properties, finite deformations, Piola–Kirchhoff stress tensor, deformation gradient, universal representation of constitutive relations, asymptotic homogenization method, local problems, method of nested optimization, stress-strain diagrams |