Search
Combined Loading Processes in Technological Problems
| Authors: Vinnik P.M., Ivanov K.M. | Published: 09.06.2016 |
| Published in issue: #6(675)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: combined loading processes, monotonic deformation, measure of deviation from monotony, rheological model |
The Determination of Optimal Conditions for Flat Grinding of Steel Workpieces
| Authors: Nosenko V.A., Tyshkevich V.N., Orlov S.V., Sarazov A.V., Sukocheva Е.А. | Published: 09.06.2016 |
| Published in issue: #6(675)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: grinding, quality of machined surface, process optimization |
The Technology of Manufacturing Fibrous Non-Woven Materials by Ultrasonic Welding
| Authors: Volkov S.S., Deryabin A.A., Shestel L.A. | Published: 09.06.2016 |
| Published in issue: #6(675)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: nonwoven materials, canvas, ultrasonic welding, seam, strength, strength, amplitude, frequency, pressure |
To the Question of Temperature Effect on the Resistivity Uniformity of Silicon Carbide Substrates
| Authors: Viyuginov V.N., Gudkov A.G., Shashurin V.D. | Published: 09.06.2016 |
| Published in issue: #6(675)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: silicon carbide, electrical properties, substrate, semiconductor, resistivity, thermal effects, single crystal |
Modern Approach to Determine the Stress State in the Deformation Zone under Local Loading
| Authors: Zaides S.A., Ngo Cao Cuong | Published: 30.06.2016 |
| Published in issue: #7(676)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: surface plastic deformation, stress state, residual stress, local loading, ball diameter, depth of hardening |
The Experimental Determination of the Ductile-Fracture Transition Boundaries when Cutting Brittle Materials
| Authors: Zakharevich E.M., Lapshin V.V., Shavva M.A., Grubyi S.V. | Published: 30.06.2016 |
| Published in issue: #7(676)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: ultra-precision processing, brittle material processing, quasi-plastic cutting, ductile-fracture transition boundaries |
Transfer of Metal on the Silicon Carbide Surface when Micro-Cutting Titanium and Zirconium
| Authors: Nosenko V.A., Avilov A.V., Nosenko V.A., Bakhmat V.I., Bykov Y.M. | Published: 30.06.2016 |
| Published in issue: #7(676)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: micro-cutting, titanium, zirconium, silicon carbide, surface morphology, metal transfer |
The Selection of High-Porous Boron Nitride Wheels Based on Topography of W9Mo4Co8 Plates for Pendulum Grinding Using Fuzzy Logic
| Authors: Soler Y.I., Shustov A.I., Nguen M.T. | Published: 30.06.2016 |
| Published in issue: #7(676)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: grinding, surface quality, median, quartile latitude, fuzzy logic, desirability function |
The Study of the Workpiece Heating Process during Gas Forming with Back-Pressure
| Authors: Botashev A.Y., Malsugenov R.S., Bisilov N.U., Bayramukov R.A. | Published: 10.08.2016 |
| Published in issue: #8(677)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: gas forming, combustion chamber, fuel mixture, workpiece heating |
Improving the Efficiency of Thermosiphon Radiators by Structuring the Outer Surface of the Heating Tube
| Authors: Zubkov N.N., Barskov K.V. | Published: 10.08.2016 |
| Published in issue: #8(677)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: thermosiphon radiator, heating system, nucleate boiling, heat transfer intensification, deformational cutting, micro-structured surface |