Search
The Diagnostics of Roller Bearings Using the Phase-Chronometric Method
| Authors: Pronyakin V.I., Kudryavtsev E.A., Komshin A.S., Potapov K.G. | Published: 24.03.2017 |
| Published in issue: #3(684)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: roller bearing, bearing assembly, emerging defects, mathematical model, phase-chronometric method of diagnostics, information-metrological support |
An Experimental Study of Electrophysical Characteristics of Gas Flow when Bench Testing Elements of Flow Ducts in Ramjets
| Authors: Rudinskiy A.V., Aleksandrov V.Yu., Yagodnikov D.A. | Published: 18.04.2017 |
| Published in issue: #4(685)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: ramjet engine, fire tests, electrophysical diagnostics, gas flow magnetometer, magnetic field strength |
The Specific Features of Heat Generation in Ultrasonic Welding of Rigid Plastics
| Authors: Volkov S.S., Korolev S.A., Rozanov D.S. | Published: 18.04.2017 |
| Published in issue: #4(685)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: ultrasonic welding, static welding pressure, ultrasonic frequency, amplitude of waveguide oscillations, crystal melting temperature, rigid plastics |
Predicting Finishing Grinding Conditions for High-Speed Cutting Plates of Variable Compliance Using Multiparametric Optimization of Roughness
| Authors: Soler Y.I., Van Canh Nguyen, Hoang Ngoc Anh | Published: 18.04.2017 |
| Published in issue: #4(685)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: grinding high-speed cutting plates, multiparametric optimization, Design-Expert 8.0.4.1 software, technological factors (parameters), regression models |
Programming Methods for Combined Additive-Subtractive Processing
| Authors: Eugenev G.B. | Published: 18.04.2017 |
| Published in issue: #4(685)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: combined additive-subtractive processing, hybrid machining centers, CNC equipment, programming for combined operations |
The Determination of Anisotropy Coefficients when Replacing the Actual Structure by a Structurally Anisotropic Solid Model
| Authors: Korotkaya O.V. | Published: 18.04.2017 |
| Published in issue: #4(685)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: substructure method, cyclic symmetric sector, combustion chamber of a liquid-propellant rocket engine, cooling ducts, anisotropy coefficients, Young’s moduli |
Parametric Synthesis of the Kinematics of Slot Formation in Bi-Rotary Edge Cutting Machining
| Authors: Ivanov D.V. | Published: 18.04.2017 |
| Published in issue: #4(685)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: cycloidal formation process, parametrical synthesis, kinematic gear ratio, iterative algorithm |
Experimental Studies of Ultra-Precision Cutting Edge Machining of Silicon
| Authors: Lapshin V.V., Grubyi S.V. | Published: 18.04.2017 |
| Published in issue: #4(685)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: ultra-precision cutting edge machining, single-point diamond turning, monocrystalline diamond cutter, monocrystalline silicon |
Machining Robotic Technology Systems in Mechanical Engineering
| Authors: Eugenev G.B., Kryukov S.S., Chastukhin A.V. | Published: 17.05.2017 |
| Published in issue: #5(686)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: machining, industrial robotics, robotic technology systems, flexible manufacturing systems |
Losses in the Inlet and Outlet Ducts of Oil-Free Scroll Vacuum Pumps
| Authors: Raykov A.A., Burmistrov A.V., Salikeev S.I., Gimaltynov A.T., Yakupov R.R. | Published: 17.05.2017 |
| Published in issue: #5(686)/2017 | |
| Category: Technology and Process Machines | |
| Keywords: scroll vacuum pump, duct resistance, gas flow rate, gas flow regime, flow coefficient, pumping speed |