Search
Investigation of influence of alumina nanoparticles on polymeric composite materials mechanical properties
| Authors: Astakhov M.V., Sorokina I.I. | Published: 16.09.2013 |
| Published in issue: #11(620)/2011 | |
| Category: Technology and Process Machines | |
| Keywords: polymeric composite materials, mechanical properties, analysis of experiment results |
Complex investigation of brittle strength of cutting tools from synthecor when machining nonferrous metals and alloys
| Authors: Arsumanyan A.M. | Published: 16.09.2013 |
| Published in issue: #11(620)/2011 | |
| Category: Technology and Process Machines | |
| Keywords: synthetic corundum, brittle, strength, strength, plate, nonferrous metals and alloys, durability |
Geometrical surface roughness in cylindrical conventional milling and climb milling
| Authors: Tikhonova A.A., Vinogradov D.V. | Published: 16.09.2013 |
| Published in issue: #11(620)/2011 | |
| Category: Technology and Process Machines | |
| Keywords: machinability, indicator of the machinability, conventional milling, climb milling, geometric roughness, residual cross -section |
Two-sided abrasive lapping of wafers taking into account laps wear
| Authors: Chizhov A.S. | Published: 16.09.2013 |
| Published in issue: #11(620)/2011 | |
| Category: Technology and Process Machines | |
| Keywords: two sided lapping, monocrystal wafer, elastic deformation, abrasive treatment, tool wear, holder, laps dressing |
Change of hardness of a surface of a detail by a machining method
| Authors: Vasiliev S.G., Shulyak Y.I. | Published: 16.09.2013 |
| Published in issue: #11(620)/2011 | |
| Category: Technology and Process Machines | |
| Keywords: hardness, hardening, microhardness, plastic deformation, chipping, deformational cutting, wear, machining |
Increasing a workpiece surface hardness by thermal effect using macro;deformation process
| Authors: Vasiliev S.G., popotsov P.P. | Published: 16.09.2013 |
| Published in issue: #12(621)/2011 | |
| Category: Technology and Process Machines | |
| Keywords: surface hardening, hardness, wear, heat treatment, quench temperature, phase (structural) transformations, macro-deformation pro cess, austenitic-martensitic layer, unetched layer |
Accuracy of machining internal threads with a combined tool
| Authors: Dreval A.E., Malkov O.V., Litvinenko A.V. | Published: 16.09.2013 |
| Published in issue: #12(621)/2011 | |
| Category: Technology and Process Machines | |
| Keywords: combined tool, thread milling, threadcutting tool, thread |
Dynamic compaction of composite materials under hot pressing
| Authors: Belyakov E.V., Tarasov V.A. | Published: 16.09.2013 |
| Published in issue: #12(621)/2011 | |
| Category: Technology and Process Machines | |
| Keywords: polymeric composite materials, hot pressing, carbon fillers |
Static tension tests of external threads made by thread milling
| Authors: Malkov O.V., Golovko I.M. | Published: 16.09.2013 |
| Published in issue: #12(621)/2011 | |
| Category: Technology and Process Machines | |
| Keywords: thread milling, external thread, static tests on tension, thread profile |
Analysis of methods and development of hardware for experimental investigation of dynamic signals of metal-cutting machine tools
| Authors: Zagidullin R.Sh., Skiba V.M. | Published: 16.09.2013 |
| Published in issue: #12(621)/2011 | |
| Category: Technology and Process Machines | |
| Keywords: machinetool, vibration, method, automation, investigation, virtual instrument, signal |