Search
Morphology of the silicon carbide surface after micro cutting of molybdenum
| Authors: Nosenko V.A., Avilov A.V., Kharlamov V.O., Bakhmat V.I. | Published: 16.06.2015 |
| Published in issue: #6(663)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: silicon carbide, molybdenum, micro cutting, wear site, surface morphology, electronic microscope |
Nanostructured Processes at the Destruction and Wear of Carbide Cutting Tools
| Authors: Kabaldin Y.G., Vlasov E.E. | Published: 29.07.2015 |
| Published in issue: #7(664)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: cemented carbide, tools, destruction, wear, nanostructured processes |
X-ray Thickness Gauging in Non-Ferrous Metal Rolling
| Authors: Klyuev V.V., Artemiev B.V., Artemyev I.B., Klyuev Z.V. | Published: 29.07.2015 |
| Published in issue: #7(664)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: X-ray inspection, thickness measurement, X-ray thickness measurement |
Three-dimensional Computer Modeling in Teaching «Theory of Mechanisms and Machines» Discipline
| Authors: Egorova O.V. | Published: 29.07.2015 |
| Published in issue: #7(664)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: theory of Mechanisms and Machines, TMM, Ferguson’s Paradox, planetary train, 3D-modeling, new educational technologies |
Control System for a Miniature In-Tube Robot
| Authors: Vorotnikov S.A., Nikitin N.I., Ceccarelli M. | Published: 06.08.2015 |
| Published in issue: #8(665)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: miniature in-tube robot, modular architecture, transportation and handling de-vice, control system, fuzzy-logic controller |
Design Features of Technological Process of Tangential Turning
| Authors: Skiba V.M. | Published: 06.08.2015 |
| Published in issue: #8(665)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: designing, technological process, tangential turning, turning efficiency, tooling |
Improving the Efficiency of Grinding Using a Halogen Generating Impregnator
| Authors: Nosenko V.A., Mitrofanov A.P., Krutikova A.A. | Published: 06.08.2015 |
| Published in issue: #8(665)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: grinding, abrasive tool, impregnator, titanium alloy, chlorine concentration, grinding force, surface roughness, grinding ratio |
Calculations of Actuator Promising Designs
| Authors: Gavryushin S.S., McMillan A., Nikolaeva A.S., Podkopaeva T.B. | Published: 06.08.2015 |
| Published in issue: #8(665)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: actuator, thin-walled shell, large displacements, nonlinear deformation, «snap-through» |
Workflow Planning System for a Machine Building Enterprise With Assembly Line Manufacturing
| Authors: Ermolova M.A. | Published: 06.08.2015 |
| Published in issue: #8(665)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: scheduling theory, planning, machine-building enterprises, machining, assembly line production, aggregation methods, algorithm, software system |
Selection of Composition and Structure of Coatings for Cutting Tools Based On Quantum Mechanical Calculations
| Authors: Kabaldin Y.G., Vlasov E.E., Nemtsov Y.Y. | Published: 28.09.2015 |
| Published in issue: #9(666)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: cutting tools, wear-resistant coatings, friction pair, bond strength, quantum mechanical calculations, coating composition optimization |