Search
The Specifics of Vortex Machining of Ring Profiles on Lateral Surfaces of Rotation
| Authors: Rasulov N.M., Nadirov Y.M. | Published: 04.12.2015 |
| Published in issue: #12(669)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: vortex method, longitudinal feed, circular feed, cutting depth, groove width, technological geometry |
Ultra-Jet Diagnostics of the Quality of Welds
| Authors: Abashin M.I., Bochkarev S.V., Tsaplin A.I., Kobernik N.V. | Published: 04.12.2015 |
| Published in issue: #12(669)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: diagnosis, ultra-jet impact, weld, hardness, shock viscosity |
Development of Operational Control Systems of Filtration Flow Characteristics in Oil Wells
| Authors: Maksimov S.F., Bobrov A.N., Andreev E.A. | Published: 04.12.2015 |
| Published in issue: #12(669)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: multi-layer oil well, drowned well, downhole wellhead flow, filtration flow, downhole fluid sample, electrical conductivity, downhole fluid, continuous sampling, control system |
The Practice of Dimensional Modelling of Assembly Operations Using Stationary Compensators
| Authors: Galkin M.G., Smagin A.S. | Published: 04.12.2015 |
| Published in issue: #12(669)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: dimensional modelling, single-circuit graph model, scattering field of master link dimension, dimensional couplings, control method, stationary compensator, controller link |
Control Power Calculation for Teeth of the Planetary Stage of a Gear Drive Using ANSYS Software Package
| Authors: Karatushin S.I., Pleschanova Y.A., Bildyuk N.A., Bokuchava P.N. | Published: 04.12.2015 |
| Published in issue: #12(669)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: carburization, residual stresses, power calculation, planetary gear, flexural strength, contact strength, ANSYS |
The Development Trends of Computing Equipment and Issues Related to Electronic Modelling
| Authors: Kovalenko S.M., Platonova O.V., Mikitin V.M. | Published: 04.12.2015 |
| Published in issue: #12(669)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: computing equipment, electronic modelling, level of micro-electronic technology, microcircuit complexity level, processing time and interference resistance of digital equipment |
Mechanical Behaviour and Perfomances of the Artillery of the Roman Legions
| Authors: Rossi C. | Published: 04.12.2015 |
| Published in issue: #12(669)/2015 | |
| Category: Technology and Process Machines | |
| Keywords: Ancient machines design, Roman artillery, Machine terminology |
Increasing the Efficiency of Hydroabrasive Cutting through the Choice of Rational Cutting Modes by Acoustic Emission Method
| Authors: Barzov A.A., Galinovsky A.L., Khafizov M.V., Kolpakov V.I. | Published: 20.01.2016 |
| Published in issue: #1(670)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: hydroabrasive cutting, acoustic emission, technological parameters, abrasive consumption, technology efficiency |
The Application of Cyclic Symmetry and the Substructure Method in the Thermal Stress Analysis of the Combustion Chamber of the Liquid-Propellant Rocket Engine with LOX Cooling
| Authors: Korotkaya O.V., Gavryushin S.S. | Published: 20.01.2016 |
| Published in issue: #1(670)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: mathematical modeling, finite element method, substructure, cyclic symmetry, stress-strain state, nozzle, combustion chamber, liquid-propellant rocket engine, cooling channels, LOX-cooling |
The Correlation between Molding Sand Characteristics and the Quality of Cast Beds of Machine Tools
| Authors: Yagopolskiy A.G., Ozerova E.S., Savokhina O.M. | Published: 20.01.2016 |
| Published in issue: #1(670)/2016 | |
| Category: Technology and Process Machines | |
| Keywords: machine tool, machine tool bed, casting, molding sands, bentonite and refractory clay, additive technology, hybrid technology |