Search
Purpose of cutting modes When finishing GTE discs taking into account cutting tools coatings
| Authors: Fomenko R.N., Yolkin M.S. | Published: 04.11.2013 |
| Published in issue: #8(629)/2012 | |
| Category: Technology and Process Machines | |
| Keywords: optimal cutting speed, nanostructured coatings, quality parameters of surface layer, friction coefficient |
Development of technology for mechanized arc welding of coatings with a given set of properties resistant to hydroabrasive wear
| Authors: Orlik A.G., Chernyshev G.G. | Published: 04.11.2013 |
| Published in issue: #8(629)/2012 | |
| Category: Technology and Process Machines | |
| Keywords: mechanized arc welding, metallography using optical and electron microscopy, microrentgenostructural analysis, hydroabrasive wear test |
Analysis of opportunities to obtain chip grooves on taps by disc radial cutters
| Authors: Balandin A.D., Danilenko B.D. | Published: 04.11.2013 |
| Published in issue: #8(629)/2012 | |
| Category: Technology and Process Machines | |
| Keywords: tap, chip groove, disk radius cutter, helix angle of spiral grooves, tooth width in normal section, normal cutter angle, grinding mill |
Detection of delaminations and their depth in CFRP structures using eddy current type of NDE
| Authors: Potapov A.I., Syasko V.A., Chertov D.N. | Published: 04.11.2013 |
| Published in issue: #8(629)/2012 | |
| Category: Technology and Process Machines | |
| Keywords: сarbon fiber reinforced plastic, delamination, eddy current, nondestructive testing |
Investigation of stability of combined drawing and flanging process when stamping double walled rings
| Authors: Petrushina M.M., Evsyukov S.A., Ezjev A.S. | Published: 04.11.2013 |
| Published in issue: #9(630)/2012 | |
| Category: Technology and Process Machines | |
| Keywords: deep drawing, hole flanging, simulation |
Assurance of reliability under eddy current nondestructive thread testing using tangential probe
| Authors: Potapov A.I., Solomenchuk P.V., Syasko V.A. | Published: 04.11.2013 |
| Published in issue: #9(630)/2012 | |
| Category: Technology and Process Machines | |
| Keywords: thread testing, eddy current, reference block, nondestructive testing |
Application of hybrid diagnostics to assess performance properties of structural ceramics
| Authors: Galinovsky A.L., Mulyar S.G., Khafizov M.V. | Published: 04.11.2013 |
| Published in issue: #9(630)/2012 | |
| Category: Technology and Process Machines | |
| Keywords: waterjet, ceramic, diagnostics |
Gas tungsten arc welding of carbon and lowalloy steels small diameter pipes with combined protection
| Authors: Kobernik N.V., Tretyakov E.S., Chernyshev G.G. | Published: 04.11.2013 |
| Published in issue: #9(630)/2012 | |
| Category: Technology and Process Machines | |
| Keywords: tungsten inert gas welding, gas tungsten arc welding with combined protection, welding of pipelines, metal fluidity, arc reduction, dual-gas protection |
Effect of wave energy on efficiency of materials hydro processing
| Authors: Galinovsky A.L., Provatorov A.S., Khafizov M.V. | Published: 04.11.2013 |
| Published in issue: #10(631)/2012 | |
| Category: Technology and Process Machines | |
| Keywords: waterjet, wave process, acoustic emission, computer simulation |
Factor model of ultra-jet hydroerosion
| Authors: Barzov A.A., Galinovsky A.L., Abashin M.I. | Published: 04.11.2013 |
| Published in issue: #10(631)/2012 | |
| Category: Technology and Process Machines | |
| Keywords: factor, ultra-jet, diagnostics, response function, informative sign, factor analysis |